computer radio software

computer radio software

Ham Radio : Personal Pages : USA

• N4URW Joel - Ham Radio software and software for the average computer user
  [ Hits: 984 | Votes: 2 | Rating: 1 ]

• SoftRock-40 - The SoftRock-40 is a small, low-cost, good-performing "software defined radio" receiver that plugs into a computer USB port and delivers I-Q audio signals to the computer's sound card. It was designed by Tony Parks, KB9YIG and Bill Tracey, KD5TFD as an "SDR sampler project" for hams everywhere to easily try out software defined radio.
  [ Hits: 8542 | Votes: 9 | Rating: 7 ]
• SDR4Space - Software Defined Radio for Space Applications produces ground stations for uplink and downlink, Rotator computer controller with USB and CANbus Interface, USB Converters
  [ Hits: 146 | Votes: 0 | Rating: 0 ]

• FreeDV - Digital Voice for HF bands - FreeDV uses an audio codec as a software based modem to decode and encode the voice and text data from your computer. The data is encoded and then is transmitted over the HF radio using AF signals that can then in turn be decoded by the receiving station.
  [ Hits: 92 | Votes: 0 | Rating: 0 ]

• About NBEMS - Narrow Band Emergency Messaging Software (NBEMS) is an Open Source software suite that allows amateur radio operators to reliably send and receive data using nearly any computer (Windows, Mac, and Linux) and any analog radio without requiring a dedicated digital infrastructure or specialized modem hardware
  [ Hits: 312 | Votes: 0 | Rating: 0 ]

• Yaesu VX-7 and 5R programming cable - VX-7/5R Computer Interfacing by Bas Helman G4TIC
  [ Hits: 1047 | Votes: 4 | Rating: 5 ]

• Interlock Monitor - The Interlock Monitor (IM) program allows you to control and monitor the Interlock device from any computer in your network. The Interlock is an equipment designed to be used by contesters where they need to check, supervise and limit, how many radios are in transmission at any given time
  [ Hits: 69 | Votes: 0 | Rating: 0 ]

• MacPacSat - allows a Macintosh computer to communicate via packet radio with the amateur packet satellites currently in operation using the 'PACSAT' protocols
  [ Hits: 1513 | Votes: 0 | Rating: 0 ]
• xCAT xDAX for macOSX and FlexRadio 6000 - xCAT is an helper application for the FlexRadio 6000 series running on macOS computers to control via CAT protocol tranceivers, while xDAX purpose is to provide a way for Digital Mode Software like Fldigi, WSJT-X to access the digital audio data (DAX) of the FlexRadioTM
  [ Hits: 198 | Votes: 0 | Rating: 0 ]

• CyberDX-CW - CyberDX-CW is a software simulation of an amateur radio station monitoring the world. Generates a simulated radio environment, where the operator can tune all of the HF bands and actually hear computer generated station activity
  [ Hits: 2672 | Votes: 3 | Rating: 6.67 ]

• Meteor and Colorgramme - FREE specialized software in the detection and registration of echoes radio products by meteors shower, falling star, at the time of their gone in atmospheric. They are destined to all possessors of a radio and a computer, interested parties by this simple technique of radioastronomy.
  [ Hits: 1524 | Votes: 2 | Rating: 8.5 ]

• Spectrum Commander - Scan*Star Spectrum Commander is the software of choice for radio enthusiasts who desire advanced computer control, comprehensive database management features and support for a wide range of radios and decoders.
  [ Hits: 11964 | Votes: 9 | Rating: 4.22 ]
• AR8200 Computer Control Software - Ar8200 computer control software jaor is the ultimate in management for the aor 8200 mki, mkii and mkiii radio scanner. the software allows full function control, memory management, configuration and remote access of the radio.
  [ Hits: 2926 | Votes: 8 | Rating: 6.78 ]
• GBCAT - GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
  [ Hits: 2528 | Votes: 44 | Rating: 9.14 ]

• MDSR - Modulator-Demodulator Software Radio A radio communication system where modulating and demodulating components are implemented using software on a personal computer or other embedded computing devices using by a converter.
  [ Hits: 914 | Votes: 30 | Rating: 7.93 ]

• Programming KG-UV3D and UV-5R - Programming the Wouxun KG-UV3D and the Baofeng UV-5R+, getting your computer to recognize the programming cable, installing the Wouxun software and hints on how to program Baofeng radio UV-5R.
  [ Hits: 79 | Votes: 0 | Rating: 0 ]

• Kenwood-to-PC Serial Interface - A circuit that connects an IBM compatible personal computer, running TR Log or CT (etc.) contest logging software, and Kenwood transceivers equipped with serial control ports. CW keying is also provided in this RFI filtered interface unit.
  [ Hits: 2287 | Votes: 3 | Rating: 4 ]

• SDR Receiver with RTL-SDR and Gnu Radio - This project is a Software Defined Radio Receiver. It has a frequency range of 24MHz 1.2GHz. It can demodulate AM, FM, USB, LSB with selectable bandwidths of 600, 2400, 2800, 3200 and 6400Hz. Using a simple RTL-SDR Dongle and Raspberry Pi 3 computer using GNU RADIO
  [ Hits: 485 | Votes: 1 | Rating: 1 ]

• PC to Rig Interfacing Information - Connecting the computer to your RTX for using ham radio software programs
  [ Hits: 480 | Votes: 0 | Rating: 0 ]
• Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
  [ Hits: 230 | Votes: 0 | Rating: 0 ]