control yaesu68 links
Antennas : Towers
- ZL1BPU Rotator Controller
- A very simple controller circuit, with fairly smart performance!
The ZL1BPU Rotator Controller has been designed as an add-on unit for the popular Kenpro KR-400 and Yaesu G-400 rotators. The controller consists of a small circuit board which fits inside the rotator control box (see picture).
[ Hits: 2744 | Votes: 3 | Rating: 4.00 ]
- N2VZ Automatic Screwdriver Antenna Controller
- Turbo Tuner TM Fully automatic screwdriver antenna controller for Icom, Kenwood, Yaesu radios. Fully plug and play with Tarheel antennas and High Sierra and Hi-Q.
[ Hits: 4764 | Votes: 22 | Rating: 7.15 ]
- Coastal ChipWorks
- Amateur Radio Products From John Hansen, W2FS, Kenwood D700 Keyboard Interface, Expandable TNC with an Optional, remote controls for ICOM radios, frequency keypads for yaesu and icom radios
[ Hits: 2524 | Votes: 2 | Rating: 5.50 ]
- FT-817 / 847 programming
- The Yaesu FT-847/817 CAT Command Structure General Overview & Link Communications Repeater Controller's Remote Base Control
[ Hits: 3038 | Votes: 1 | Rating: 2.00 ]
- Yaesu FT-847 bulletin board
- A full forum topic dedicated to FT-847 at supercontrol.de
[ Hits: 884 | Votes: 0 | Rating: 0.00 ]
- Yaesu FT-857 serial cable
- Here is a serial control (CAT) cable that plugs into the FT-857's microphone jack, freeing the CAT/Linear jack for other purposes.
[ Hits: 8936 | Votes: 12 | Rating: 4.75 ]
- FTBVR5K VR-5000 Radio control
- Memory management programming software for the Yaesu VR-5000 receiver
[ Hits: 3715 | Votes: 11 | Rating: 6.45 ]
- Yaesu VR-5000 control software
- F1MDT freeware remote control for yaesu VR-5000 in french
[ Hits: 4966 | Votes: 11 | Rating: 5.00 ]
- G3IBI Antenna rotators
- Carry a small stock of new and reconditioned parts for both rotators and control boxes for the following makes: CDE/HYGAIN , YAESU , STOLLE.
[ Hits: 1019 | Votes: 3 | Rating: 10.00 ]
- LP-Rotor 2.0 is a standalone freeware rotator control program for use with Microsoft Windows. LP-Rotor should work with all versions of Windows from Windows 95 forward. It is designed to be used with the Hy-Gain DCU-1 or RotorEZ interfaces for Hy-Gain rotators, or the RotorCard interface for Yaesu rotators.
[ Hits: 3955 | Votes: 3 | Rating: 7.00 ]
- KC2IVL - FT100 for Linux
- Yaesu FT-100 radio control software for linux
[ Hits: 1608 | Votes: 28 | Rating: 3.96 ]
- FT897 SuperControl
- CAT control and logging software project especially developed for the YAESU FT-897 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope
[ Hits: 15584 | Votes: 21 | Rating: 7.81 ]
- RigResident is a small program for RIG control, which does allow to set and read data of connected tranceiver (frequency, mode etc).
RigResident supports more than 70 TRX models from ICOM, KENWOOD, YAESU and Ten-Tec.
[ Hits: 3374 | Votes: 4 | Rating: 7.10 ]
- FTBCAT Cat radio control software
- Free CAT control software for Yaesu FT-100, FT-100D, FT-817, FT-817ND, FT-847, FT-857, FT-857D, FT-897, FT-897D, FT-920, FT-1000MP Mark V, VR-5000 and FRG-100 transceivers.
[ Hits: 42078 | Votes: 105 | Rating: 4.54 ]
- CAT100 Remote Control for the Yaesu FT-100
[ Hits: 2132 | Votes: 2 | Rating: 1.00 ]
- FT100 XE2NLM
- Another radio control softwrare for the Yaesu FT 100 by Federico Batarse, XE2NLM
[ Hits: 1101 | Votes: 3 | Rating: 6.67 ]
- Shortwave Log (SWLog)
- Shortwave Log, SWLog is a comprehensive logging and radio control program. While designed for shortwave and mediumwave listening, the program is quite adept when listening to longwave, utility, or amateur radio. Support Icom Drake TenTec Yaesu JRC and lowe receivers.
[ Hits: 5768 | Votes: 22 | Rating: 6.15 ]
- FRG-Controller by Frans Vink
- Free prgram to control Yaesu FRG 100 SW receiver with a PC
[ Hits: 1457 | Votes: 13 | Rating: 7.40 ]
- Virtual Legacy Radio
- Windows remote control for Yaesu or Icom. Displays the current transceiver settings frequency, mode, and others on the PC in an old-fashioned way that corresponds to the look of receivers in 70's.
DX-Cluster Watch (DCW) is an application that automatically refreshes a web page with the dx-cluster content, parses spot lines from it, keeps a consolidated list and inserts the spots to VLR as frequency markers by OK1FIG
[ Hits: 1578 | Votes: 5 | Rating: 10.00 ]
- DXCAT is a shareware program dedicated to the Yaesu FT900. It is a CAT system computer control program which enables you to have a total control on your transceiver. by F6GQK
[ Hits: 734 | Votes: 0 | Rating: 0.00 ]
You can try similar termscontrol yaesu control cat yaesu ft 757 yaesu ft 767 cat control yaesu rig control yaesu ft 747 control sof yaesu cat control cat control for yaesu yaesu ft 857 cat control yaesu vx-7r rig control cat-control-for-yaesu yaesu 857 rig control cat control yaesu yaesu-cat-control rig control yaesu 897 yaesu-ft-767-cat-control
Get our links, Everywhere!
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your siteDaily Top 10 links