ft 8 software

171 links

6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
[ Hits: 134 | Votes: 2 | Rating: 6 ]

Free eBook - Capture the MAGIC of Six Meters - This book provides plenty of insight into how you, too, can Capture the Magic of Six Meters. It covers propagation, equipment, software, antennas, awards and contesting, as well as assistance in finding the magic.
[ Hits: 312 | Votes: 0 | Rating: 0 ]

FT8 Operating Guide - Weak signal HF DXing - An excellent guide to operating FT8 mode available in English, German and Czech that cover several aspects of the FT8 operations. Includes and exaustive guide to how configure FT8 software, how to conducto a QSO and how to operate DXPeditions in FT8 F/H mode. Covers aspects of FT4 contesting operations and interfacing with logging programs
[ Hits: 396 | Votes: 2 | Rating: 4 ]

The FT-817 Calibration Menu - One of the interesting features of the FT-817 is that many of the conventional calibration settings that would have, in the past, been done using manual adjustments of coils, capacitors, and potentiometers, are done via software.
[ Hits: 128 | Votes: 0 | Rating: 0 ]

Yaesu FT-991 Memory Manager - Free memory management software for the Yaesu FT-991 and FT-991A models. It runs only on Windows 7, 8, 8.1, 10 both 32 and 64 bits, it also permits basic remote control features and allow backup and restore settings and memories. Documentation in mainly in French.
[ Hits: 1420 | Votes: 7 | Rating: 6.61 ]

Baofeng UV-5 Programming Cable - Baofeng UV-5R uses RS232 to communicate or programming with the PC software and you can make your own programming cable with a few components.
[ Hits: 439 | Votes: 2 | Rating: 7.5 ]

MD-380 Modifications - Modifications for Retevis RT3 / Tytera MD-380 includes Hardware Modifications, Codeplugs, Software / Firmware Modifications.
[ Hits: 253 | Votes: 2 | Rating: 5.5 ]

Antenna Calculation Software - The program consists of tabbed pages for various antenna and transmission line calculation. You can compute the values for an inverted L network that will allow you to match the 50 ohm output of the radio, or you can compute the necessary length in the units of choice for a 5/8 wave vertical for 10 meter band.
[ Hits: 435 | Votes: 1 | Rating: 10 ]

LogView for WSJT-X - Log viewer for WSJT-X is an external utility to parse the WSJT-X log and check for duplicate contacts or making additional analysis.
[ Hits: 565 | Votes: 0 | Rating: 0 ]

SmartSDR for Mac - SDR control for FlexRadio Signature Series Rig for Apple Mac. FT8 integration, External Software support, Several additional Tools, display as many panadapters and slices your Radio is capable of.
[ Hits: 113 | Votes: 1 | Rating: 10 ]

Soundmodem UZ7HO - Soundmodem is a free software defined dual-port Packet-Radio TNC that implement a soundcard as a modem and supports AX.25 protocol. Soundmodem has been tested on Windows XP, Vista, 7, 8, 10 and has proved stable in operation. The Soundmodem may be used to build EMCOMM, APRS, BBS, Node station, for satellites
[ Hits: 607 | Votes: 1 | Rating: 1 ]

Win4YaesuSuite - Yaesu Radio Control - Win4Yaesu Suite is a commercial software for Yaesu FTDX and FT991 Radios. It includes support for SDRPlay and LPPAN panadapters. It interfaces to all third party hardware and software programs including HRDLogbook, DM780, DXLabsSuite, NAP3, N1MM+ and many more.
[ Hits: 484 | Votes: 2 | Rating: 7.5 ]
Win4IcomSuite ICOM Radio Control Software - The Ultimate Control Software for the IC-7300, IC-7610, IC-7600, IC-7850, IC-7851 and Others is a control software suite that includes additional interesting features such as support for the built in Spectrum Scope, Audio monitors, Shortwave DB, CW Terminal, Clublog Spotting, Memory management, interface to Ham Radio Deluxe Logbook, DM780, n1mm+, log4om, DXLab and other. Runs on Windows OS, commercial licence.
[ Hits: 364 | Votes: 1 | Rating: 1 ]

KG-UV6 Commander - Free programming software for the Wouxun KG-UV6D and KG-UV6X.
[ Hits: 181 | Votes: 1 | Rating: 9 ]
Icom IC-R2 Commander - Programming software for the Icom IC-R2 handheld receiver and scanner.
[ Hits: 137 | Votes: 0 | Rating: 0 ]

NetTime for Windows - NetTime is a simple and free software to sync your computer clock via internet. Very useful tool for FT8 FT4 operating modes.
[ Hits: 1457 | Votes: 0 | Rating: 0 ]
GPS2Time ^updated - A means of sync-ing your computer clock using a GPS Receiver. GPS2Time is another GPS network time synchronization software application for Window 7 and higher. Freeware.
[ Hits: 1079 | Votes: 4 | Rating: 10 ]

Universal HF Tracker - The PCB can produce a High Frequency RF signal in the range of 1MHz to 12.5MHz using an AD9833 Direct Digital Sequence (DDS) frequency synthesizer. The signal can be modulated with different Weak Signal modes such as WSPR, JT9 and JT65 using our Arduino 5V/16MHz Pro Micro software.
[ Hits: 144 | Votes: 0 | Rating: 0 ]

Guide to decode SSTV with RaspberryPi and RTL-SDR - A tutorial on how to setup a receiver capable to decode SSTV signals with a small RaspberryPi version 2 and a RTL-SDR dongle. The author explains how to install the needed software to interface the RTL-SDR and a step by step guide to install the QSSTV software used to decode the signals.
[ Hits: 333 | Votes: 1 | Rating: 1 ]

SDR Receiver with RTL-SDR and Gnu Radio - This project is a Software Defined Radio Receiver. It has a frequency range of 24MHz 1.2GHz. It can demodulate AM, FM, USB, LSB with selectable bandwidths of 600, 2400, 2800, 3200 and 6400Hz. Using a simple RTL-SDR Dongle and Raspberry Pi 3 computer using GNU RADIO
[ Hits: 484 | Votes: 1 | Rating: 1 ]