half wave vertical

half wave vertical

Pages: 1 2 [next]

• K2YWE's Compact 160m Lazy-U Antenna - This compact 160m antenna is a half-wave dipole with a vertical section. It requires no radials and has worked well for me.
  [ Hits: 17877 | Votes: 16 | Rating: 7.31 ]
• The 160M Homebrew Vertical - The 160M "No Excuses" Homebrew Vertical is a 27 ft. vertical antenna, made from three 10 ft. PVC sections bolted together, and half wavelength of antenna wire helically wound around the PVC sections by K6MM
  [ Hits: 6554 | Votes: 15 | Rating: 6.14 ]

• 20m End Fed Antenna - 20m end fed half wave vertical antenna
  [ Hits: 3129 | Votes: 8 | Rating: 6.38 ]

• Vertical half-wave aerials for 4m - Practical designs pictures and alternative design of antennas for 70 Mhz by Ross Wilkinson G0WJR
  [ Hits: 8237 | Votes: 16 | Rating: 5.12 ]

• 80 Meter Pizza Pan Antenna - This is a resonant, half-wave, vertical antenna. It takes up little space in the back yard, was designed for operation on a single frequency 80 meter PSK net, and is reasonably inexpensive to construct by Chuck Hines, K6QKL
  [ Hits: 3693 | Votes: 3 | Rating: 5 ]

• Online Antenna Calculator - Java script antenna calculators for ground planes, half wave verticals, quad antenna, 5/8th wave vertical antenna, dipole and inverted vee antennas
  [ Hits: 4448 | Votes: 10 | Rating: 5.91 ]
• Aerial Calculations - G4URH calculations to design your own antennas, ground plane, half wave antennas, Quad Antennas and 5/8 verticals
  [ Hits: 2934 | Votes: 3 | Rating: 4.67 ]

• Bobtail dipole - Bobtails are vertical arrays that look like the letter "E" turned 90° clockwise onto its tails. They have 3 quarter wave vertical elements and are one wavelength long. The Half Square is a shortened Bobtail- it has 2 quarter wave vertical elements and is a half wave long.
  [ Hits: 1871 | Votes: 0 | Rating: 0 ]

• Vertical Dipole Array - A simple and awesome wire monoband antenna, very usefull for portable and dxpeditions usage, consist of two elements, a driver and the reflector. This endfed halfwave gives a very low take off angle and is very suited for chasing DX.
  [ Hits: 1174 | Votes: 2 | Rating: 6.5 ]

• 20m vertical end fed half wave - An EFHW antenna by M5FRA G8FRA
  [ Hits: 665 | Votes: 1 | Rating: 1 ]
• 20m Half-Wave End Fed - A Half wave antenna has a high impedance feed point. This can be matched using a 1/4 wave stub matching section and converts the 40m vertical into an L-shaped 20m J-Pole antenna. The 300 ohm feeder used for this purpose must be kept away from the ground.
  [ Hits: 1701 | Votes: 4 | Rating: 9.75 ]

• Super J-Pole for 435MHz - The Super J Pole antenna is a co-linear vertical consisting of a number of half wave length vertical elements separated with half-wave length stubs (Tuning stub) feed with a folded matching stub by vk6ysf
  [ Hits: 3334 | Votes: 6 | Rating: 5 ]
• J-Pole for 14MHz - 20 meter wire j-pole for 14.2 MHz, a vertical, end-fed half wave antenna by N1LO
  [ Hits: 5066 | Votes: 3 | Rating: 5.67 ]
• Improving the Super-J - The collinear J-Pole, often known as the Super-J, does improve the behavior over a regular J-Pole. As many attest, there is an advantage when vertically combining 1/2 radiating sections to have a bit of separation between the half-wave end points. The Super-J has very little separation between the two half-wave radiators.
  [ Hits: 935 | Votes: 2 | Rating: 5.5 ]

• 6m Half wave vertical - This antenna is very useful for receiving or scanning purposes, but you can use it for transmitting, too. It is 2,94m long and has a pi-configuration (Collins-Filter) for the matching.
  [ Hits: 3929 | Votes: 4 | Rating: 7.75 ]
• 6 meters band Half Wave vertical - 1/2wave vertical antenna for the 6-meterband and a 5/8 ground plane antenna for 50 Mhz
  [ Hits: 3008 | Votes: 1 | Rating: 8 ]
• G0KYA EFHW HF antenna - A 11 pages pdf file about monoband or multiband end fed half wave vertical antenna that is great for DX and very cheap to build by Steve G0KYA
  [ Hits: 1793 | Votes: 0 | Rating: 0 ]

• HF Wire Antennas for Field Day - Dipole antennas, vertical half-wave dipole antennas with impedence tranformes that can be used for portable operations. Some well worn antenna configurations are the easiest and loudest lash-ups you can try.
  [ Hits: 203 | Votes: 0 | Rating: 0 ]

• ZS1J/B - 28.2025 MHz. 5 Watts output to a half wave, end fed, vertical antenna.
  [ Hits: 318 | Votes: 0 | Rating: 0 ]
• VA3GRR - Radio Beacon - VA3GRR is a radio beacon, operating on the 10 meter amateur band. Its frequency is 28.205.5 MHz. It runs just under 5 watts of power into a vertical half-wave ringo style antenna
  [ Hits: 470 | Votes: 1 | Rating: 10 ]

Pages: 1 2 [next]