hf signal

The DXZone.com

hf signal

69 links

Antennas : Moxon
  • Moxon Mania - Building the Ultimate 4-Band Moxon Antenna - The article details the design and construction of a four-band Moxon beam by a radio amateur. The beam, mounted atop a rooftop tower, aimed for gain over a dipole on 20 meters, cost under $500, and included additional bands. The design features fiberglass spreaders, four bands (20/15/10/6 meters), and a single feedpoint. The construction involved computer modeling, NEC source code, and specific dimensions. The article outlines the assembly, materials, and tuning process, including in-situ adjustments for optimal performance. Despite initial challenges, the beam improved signal strength and facilitated contacts on multiple bands, marking it as the best HF antenna the author has owned.
    [ Hits: 94 | Votes: 0 | Rating: 0 ]
Antennas : Multiband
  • Open-Folded W8JK Antenna for HF - Originally designed by John Kraus, W8JK in about 1940, this antenna has some interesting properties. The W8JK antenna is 2 (Two) centre-fed double-dipole fed by a pair of anti-phase signals. Small size, simple antenna, offer nice performance but need a tuner. Tested in this project from 30m to 6m bands
    [ Hits: 139 | Votes: 1 | Rating: 3 ]
Operating Modes : Digital Voice
  • FreeDV - Digital Voice for HF bands - FreeDV uses an audio codec as a software based modem to decode and encode the voice and text data from your computer. The data is encoded and then is transmitted over the HF radio using AF signals that can then in turn be decoded by the receiving station.
    [ Hits: 91 | Votes: 0 | Rating: 0 ]
Propagation : Resources
  • VHF APRS Propagation Map - VHF – Based on realtime APRS reports. This map shows real-time radio propagation from stations operated near 144 MHz. It uses data gathered by Automatic Packet Reporting System-Internet Service (APRS-IS) from packet stations in the amateur radio service. The map shows activity from the past hour. Paths are smoothed to create a color-coded footprint indicating the distance VHF signals are likely to be traveling.
    [ Hits: 308 | Votes: 0 | Rating: 0 ]
Software : Decoders
  • Wavecom W-CODE - W-CODE is a professional digital mode decoder system capable to decode many digital signals on HF, VHF/UHF, SHF and SATELLITE bands.
    [ Hits: 440 | Votes: 1 | Rating: 10 ]
Software : Propagation
  • Proplab-Pro - Ray-trace radio signals through a realistic three-dimensional ionosphere using Proplab-Pro. This software has been used by the military, researchers, universities and amateur radio operators around the world to assist in determining radio propagation conditions and radio signal behavior. It is one of the most respected and well established software packages for radio engineers and enthusiasts, being actively updated for over 28 years.
    [ Hits: 168 | Votes: 0 | Rating: 0 ]
Technical Reference : Amplifiers : HF Amplifiers
  • 20 W HF Power Amplifier - A HF power amplifier with a push-pull of AFT09MS015N. The (small-signal) gain of the amplifier is around 26 dB in the lower HF band and goes down to about 24 dB on the higher end and still around 21 dB at 50 MHz. Its input matching is relatively good at the lower HF and degrades above 10 MHz.
    [ Hits: 169 | Votes: 0 | Rating: 0 ]
Technical Reference : Arduino
  • Arduino QRP Transceiver: DIY Success on HF Bands - This article introduces an Arduino-based QRP CW Transceiver designed for lower HF bands. The journey begins with the Wotduino, evolving from a keyer to a multi-mode beacon. The development includes a QRP transmitter and culminates in a receiver inspired by Roy Lewallen design. The transceiver, controlled through a control bus features a signal path, modulation, filtering, and adjustable frequency settings. Despite initial testing intentions, successful QSOs on 80 and 40 meters showcase its functional capabilities.
    [ Hits: 104 | Votes: 1 | Rating: 1 ]
Technical Reference : Transverters
  • 2m to 70cm Transverter Circuit - A 70cm / 432 MHz Transverter Project transverter circuit is an electronic device that converts a radio signal from the 2 meter to the 70 centimeter band and vice versa, allowing a single transmitter/receiver to be used for both bands. It consists of an IF stage, local oscillator, frequency multiplier, and amplifier. The circuit must be designed for minimal signal loss, noise and intermodulation distortion.
    [ Hits: 77 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for hf signal


Search hf signal with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search