kiss

The DXZone.com

kiss

11 links

Manufacturers : Digital and Packet Radio : TNC

  • TNC-X - TNC-X - The Expandable TNC A new Terminal Node Controller (kit) design based on the Chepponis/Karn KISS protocol. It is implemented using a Microchip PIC 16F628A microcontroller, a CML MX614 Bell 202 modem chip, an 8K Ramtron FRAM
    [ Hits: 4275 | Votes: 5 | Rating: 8 ]
  • NinoTNC - The TARPN NinoTNC is a USB 1200/2400/4800/9600 baud KISS-TNC project
    [ Hits: 146 | Votes: 0 | Rating: 0 ]
Operating Modes : DSP
  • Q15X25 - Q15X25 is a packet modem with a KISS/AX.25 interface designed for HF transmission of AX.25 packets and TCP/IP using Automatic Repeat reQuest (ARQ) and forward error correction (FEC).
    [ Hits: 704 | Votes: 1 | Rating: 1 ]
Operating Modes : Packet Radio
  • The KISS Protocol - The KISS TNC provides direct computer to TNC communication using a simple protocol. KISS is a simple Host-to-TNC communications protocol
    [ Hits: 539 | Votes: 2 | Rating: 3.5 ]
Software : APRS
  • UI-VIEW  updated  pop - UI-View is an APRS client that runs on Windows. This application differs from most APRS software in that it isn't designed just to be used with TNCs in terminal mode. UI-View also supports TNCs in KISS mode, AGWPE host mode and BPQ host mode. The 32 bit version of UI-View also supports WA8DED/TF host mode, and the variant of it used in the SCS PTC-II and PTC-IIe.
    [ Hits: 31674 | Votes: 56 | Rating: 7.26 ]
  • APRS-Beacon - The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)
    [ Hits: 3421 | Votes: 7 | Rating: 2.57 ]
Software : Packet
  • MUBAY - The multiuser/multitasking BayCom Packet Terminal Driver program is a general purpose communications package for communicating with a BayCom modem attached to your IBM-PC/clone in conjunction with the TFPCX Baycom driver software. The software will also work with a normal TNC if it supports KISS mode, such as the Kantronics range.
    [ Hits: 1477 | Votes: 1 | Rating: 9 ]
Technical Reference : APRS
  • UV-3R Mobilinkd - APRS in Your Pocket - An interesting combination of a Baofeng UV-3R handheld transceiver with a Mobilinkd Kiss TNC as a result of a continual improvement of the original APRS in your pocket project
    [ Hits: 732 | Votes: 3 | Rating: 5.67 ]
Technical Reference : Arduino
  • Arduino TNC - An Arduino project to make it work as a KISS TNC
    [ Hits: 1900 | Votes: 2 | Rating: 9.5 ]
Technical Reference : Homebrew
  • 27Cxx Eprom programmer and KissEprom - Simple eprom programmer for 27Cxx family , used in TNC and G3ruh modem, eprom tutorial, schematics and KissEprom software for windows by iz7ath
    [ Hits: 5616 | Votes: 77 | Rating: 5.26 ]
Technical Reference : Raspberry Pi
  • Raspberry Pi - TNC-Pi - Configure a TNC-Pi for a Raspberry Pi. The TNC-PI can be used with applications that use the Linux ax.25 stack, or applications that expect to see a KISS TNC on a serial port.
    [ Hits: 242 | Votes: 1 | Rating: 8 ]

Not satisfied ? Lookup Google Custom Search Engine for kiss


Search kiss with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

You can try similar terms
kiss kiss tnc kiss mode software

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search