modification

The DXZone.com

modification

252 links - and 3 categories

Antennas : 160M
  • K6MM 160m Antenna Modifications - After a storm damaged the antenna, W6AER replaced it with a pre-made capacitance hat from DX Engineering. Using hose clamps and conductive grease, he ensured durability. Experimenting with radials and a coil, he aimed for better performance and resilience.
    [ Hits: 46 | Votes: 0 | Rating: 0 ]
Antennas : Stealth
  • The Infamous Attic Dipole - An attic wire antenna with several modifications during the time. Began as a simple coax fed doublet antenna, and upgraded to a multi-band hf fan dipole, till the G5RV all deployed in an attic.
    [ Hits: 102 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : Elecraft K2
  • Elecraft K2 Preselector Modification - Although most Preselectors are designed with an internal T/R relay, theoretically enabling direct insertion between the transceiver and the antenna, there is a problem when running CW, especially when running full QSK. The switching time of the internal relay is too slow to follow full QSK. The best way to avoid this problem altogether is to insert the Preselector directly into the transceiver’s RX antenna line, thus avoiding entirely the need to switch the Preselector in and out.
    [ Hits: 189 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : ICOM IC-756
  • ICOM IC756 Fan Modification - ICOM IC756 PRO II III, PS125 Fan Modifications, install an external cooling fan on the ICOM IC756 PROIII to minimize the heat on the chassis, then will perform a fan modification on the ICOM PS125 power supply to minimize the fan noise.
    [ Hits: 115 | Votes: 1 | Rating: 10 ]
Radio Equipment : HF Transceivers : Icom IC-706
  • IC706 MKIIg Cooling Fans Mod - With this simple modification,it will be possible to keep the internal cooling fan on,running at reduced speed,when in receive mode.
    [ Hits: 133 | Votes: 0 | Rating: 0 ]
  • IC-706 mk2 Modifications - The 5 MHZ and MARS Mod, transmitter power max modification
    [ Hits: 105 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : Icom IC-7300
  • ICOM IC 7300 mods - Modifications for the ICOM IC 7300 transceiver, MARS mod, antenna tuner coverage expansion, Mic Modification
    [ Hits: 666 | Votes: 3 | Rating: 7.67 ]
  • Enhancing Icom IC-7300 RX Antenna - Despite the model limitations, such as a single TXRX antenna connector, the author shares a reversible modification involving a coax relay for enhanced functionality, demonstrating the transceiver's adaptability and customization potential.
    [ Hits: 188 | Votes: 1 | Rating: 10 ]
Radio Equipment : HF Transceivers : Yaesu FT-1000MP
  • FT 1000MP MK V and Keyclicks - YaesuFT1000MK V stands out with improved close-spaced SSB transmit performance, reversing a trend seen in other modern radios. Featuring a class-A mode, it offers clean HV finals when kept out of ALC. However, two significant flaws persist: the noise blanker causes receiver IM distortion, and the transmitter lacks wave-shaping on CW, resulting in pronounced keyclicks. Preliminary tests reveal strong keyclicks +1kHz and -1kHz, prompting a combined modification to address both issues.
    [ Hits: 31 | Votes: 0 | Rating: 0 ]
Radio Equipment : VHF-UHF Handhelds : TYT MD-380
  • Retevis RT3 Tytera MD-380 Modifications - Collection of modifications for the Retevis RT3, a monoband handheld transceiver for DMR (digital voice) and analog FM. It is almost identical to the Tytera MD-380.
    [ Hits: 106 | Votes: 0 | Rating: 0 ]
Technical Reference : Audio
  • JRC NVA-88 Modification - Adding 2 RCA inputs, 1 high impedance filtered audio output RCA 3, 3 HIGH PASS filters, 3 LOW PAS filters to the JRC NVA88 Speaker
    [ Hits: 54 | Votes: 0 | Rating: 0 ]
Technical Reference : Ham Radio Go Kits
  • Yaesu FT-891 Go-Box for POTA - This article documents the author's latest go-box build for outdoor ham radio operations using a Yaesu FT-891 transceiver. The go-box is constructed from a plastic "50-cal ammo case" and contains various components, including the transceiver, LDG Z11 Pro autotuner, DIY Yaesu FH-2 remote control keypad, and an external battery. The author details the design considerations, the mounting of components inside the box, and addresses issues related to ventilation and cable management. The go-box is geared for CW operations and POTA activations, with further modifications planned for a microphone and DATA jack. This project allows for rugged, environmentally protected outdoor radio operations while maintaining portability.
    [ Hits: 196 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for modification


Search modification with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search