nec software

nec software

Pages: [prev] 1 2 3

• DIY Yagi Antenna - This article describes the phases for the construction of a Yagi antenna. The calculations of the parameters are made using 4NEC2 software. This type of antenna is used for transmissions and receptions of electromagnetic waves. The project shown here refers to the frequency of 433.92 MHz.
  [ Hits: 108 | Votes: 4 | Rating: 3.5 ]

• Digital Modes with Yaesu FT-817 - Setting up the Yaesu FT-817 and Signalink for data mode communication. Hardware and software required for data mode communication, connect and configure FT-817 and Signalink
  [ Hits: 58 | Votes: 0 | Rating: 0 ]

• Programming FT-991A - Tips and tricks on programming the Yaesu FT-991A, from software installation and connecting to the PC via the USB Port, to properly programming memories.
  [ Hits: 105 | Votes: 1 | Rating: 10 ]

• NEC-Win Plus+ - Developed for beginners, hobbyists, and field engineers. Includes polar plots, rectangular plots for input impedance and VSWR, tabular data, NEC-Win Synth Light and Necvu 3D. Includes NEC2. The program also offers stepped-diameter corrections, Gain Averaging Test, CAD (.DXF) file input, 2-D and 3-D plots and antenna views, and graphical outputs. Run on older Windows version and is out of support.
  [ Hits: 313 | Votes: 2 | Rating: 4.5 ]

• Sita audio recorder - Sita is a small tool that permanently records an input of the sound card into the working memory and repeats the last 10 seconds if needed. This is ideal for connecting the radio to the Line In of the sound card and, if you have not understood something, to have the last 10 seconds repeated.
  [ Hits: 84 | Votes: 1 | Rating: 10 ]

• Skywave Linux - Linux for shortwave and amateur radio monitoring. Supports popular SDR hardware and online streaming from KiwiSDR, WebSDR, and Spyserver sites. Articles about using Linux with your SDR devices.Skywave Linux, an innovative operating system, leverages cutting-edge technology for seamless access to radio signals globally. Ideal for regions with limited internet access, it effortlessly connects to a network of SDR servers, offering high-performance SDR operation without the need for extensive hardware. With pre-installed and configured SDR software, Skywave Linux simplifies signal discovery and operation for all users.
  [ Hits: 284 | Votes: 0 | Rating: 0 ]

• DMR Contact Manager - DMR Contact Manager is a Free software package designed to make it easy to maintain channel, zone, contact and call group information in these radios. It is fully compatible with the Ham-Digital and RadioID database systems and allows instant codeplug updates from a wide variety of sources. DMR Contact Manager is designed for use with Connect Systems CS700/CS701/CS750/CS800/CS801/CS800D radios, as well as the Tytera MD-380/390/390GPS, TYT MD2017/MD9600, AnyTone AT-D868UV and AT-D858, Retevis RT3, and similar radios that use the RDT/RDB file formats.
  [ Hits: 356 | Votes: 2 | Rating: 9 ]

• The CW Typewriter: A Morse Code to ASCII Converter - The CW typewriter is a compact adapter board that transforms Morse code into ASCII characters using an Iambic key. It connects to a computer via USB, emulating the keyboard. The device features inputs for Iambic keying and a WPM speed potentiometer, and outputs for a key and a speaker for side tone. The device can be used with various software and online typing games for practice, offering a unique and interactive way to learn and use Morse code.
  [ Hits: 120 | Votes: 0 | Rating: 0 ]

• Baofeng UV5R TRRS Adapter - A tiny board, which allows a smartphone or similiar device to connect to the Baofeng UV5R radio via a TRRS audio connector. It allows for connecting the radio to a software TNC app such as APRSDroid or PocketPacket. Solder on the components, solder on the cables, then provide some stress relief, (I use solid-core wire and heat shrink tubing), and you can use your UV5R with your smartphone for APRS on the cheap.
  [ Hits: 91 | Votes: 0 | Rating: 0 ]

Pages: [prev] 1 2 3