pc computer

pc computer

Antennas : Feed Lines

• Transmission line calculator - A transmission line caculator Java applet that can be run on your computer or by using your web browser. This calclucator can also be run on your PC by following instruction and download link.
  [ Hits: 721 | Votes: 4 | Rating: 3 ]

• G8SLB SSTV Packet modems - SSTV and Packet Radio interfaces for PC and Amiga computers.
  [ Hits: 1568 | Votes: 4 | Rating: 7.75 ]

• PC to RTX interface - Schematics for IC-706, IC-718, IC-756PRO, TS-570, TS-870, and simple universal S.B. interface All three interfaces presented on this page employ galvanic isolation of the transceiver from PC computer. Audio paths are separated by transformers, optocouplers serve to separate the digital paths (PTT and RTTY keying).
  [ Hits: 3782 | Votes: 2 | Rating: 7.5 ]

• MacDSP - Digital filter for Macintosh computers with a PowerPC processor
  [ Hits: 1878 | Votes: 1 | Rating: 3 ]

• EhoCW - EhoCw is a freeware morse keyer software and a morse code generator and even a morse code decoder. It runs on your PC under windows (from NT to Vista, windows 7). This software can be used efficiently by any telegraphist, confirmed or beginner who wants to use his personnal computer as a memory keyer, you can use it to learn morse code and you can use it to decode morse code
  [ Hits: 2468 | Votes: 5 | Rating: 6.6 ]

• TNC - The Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC attached to your IBM-PC/clone. The program was written to work with the Kantronics range of TNC's but should work with any TNC that is connected to a serial port on your computer.
  [ Hits: 3955 | Votes: 1 | Rating: 1 ]

• AppCAD - Free windows application for RF Microwave and Wireless applications. AppCAD is useful for the design and analysis of many circuits, signals, and systems using products from discrete transistors and diodes to Silicon and GaAs integrated circuits. AppCad is a unique suite of RF design tools and computerized Application Notes to make your wireless design job faster and easier
  [ Hits: 133 | Votes: 1 | Rating: 8 ]

• GBCAT - GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
  [ Hits: 2527 | Votes: 44 | Rating: 9.14 ]

• Zelscope  ^pop - Zelscope is a Windows software that converts your PC into a dual-trace storage oscilloscope and spectrum analyzer. It uses your computer's sound card as analog-to-digital converter, presenting a real-time waveform or spectrum of the signal - which can be music, speech, or output from an electronic circuit.
  [ Hits: 71204 | Votes: 29 | Rating: 5.32 ]

• Making printed circuits - To make smart looking PCB's, all you need is a computer, a laser printer, copper clad board, etchant, a clothes iron and some Epson glossy photo paper.
  [ Hits: 863 | Votes: 3 | Rating: 5.67 ]

• Computer headset adapted for Ham Radio Usage - Adapting a common PC earphone with microphone to connect to a transceiver via a homemade pre-amplifier, using a simple chip with aprox 10 db gain. Includes a schematic diagram
  [ Hits: 186 | Votes: 0 | Rating: 0 ]

• Convert a PC Power Supply - Computer power supply converted for ham radio use
  [ Hits: 3153 | Votes: 8 | Rating: 7.75 ]
• 20A power supply from a PC ATX PSU - Converting Computer Power Supplies (PSU) to stabilized 13.8 V DC 20 A
  [ Hits: 4197 | Votes: 9 | Rating: 8.88 ]

• RFI and your computer. - Killing RFI from your PC without turning it off
  [ Hits: 578 | Votes: 0 | Rating: 0 ]

• Kenwood-to-PC Serial Interface - A circuit that connects an IBM compatible personal computer, running TR Log or CT (etc.) contest logging software, and Kenwood transceivers equipped with serial control ports. CW keying is also provided in this RFI filtered interface unit.
  [ Hits: 2286 | Votes: 3 | Rating: 4 ]

• SoundCard Packet TNC PC to Radio Interface - Computer sound card packet tnc to radio interface. david stansbury kb3kai home-brew version of this soundcard to rig adapter
  [ Hits: 5199 | Votes: 3 | Rating: 5.33 ]
• Dual Radio Computer Interface - Schematic of a simple interface to connect a pc to a FT-1000 Mk5 Field and FT-817 transceivers.
  [ Hits: 678 | Votes: 0 | Rating: 0 ]
• PC to Rig Interfacing Information - Connecting the computer to your RTX for using ham radio software programs
  [ Hits: 480 | Votes: 0 | Rating: 0 ]
• IC-7600 How-to Conntect to PC - Using USB audio of the Icom IC-7600 to connect a computer with fldigi and flrig. IC-7600 settings, software settings and configuration tips.
  [ Hits: 604 | Votes: 2 | Rating: 1 ]
• Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
  [ Hits: 230 | Votes: 0 | Rating: 0 ]