print antenna

15 links

160 TX array by AA1K
160 meter tx antenna array

[ Hits: 917 | Votes: 1 | Rating: 1 ]

2 Elements revesible verticals antennas - Bob Raynor
2 element reversible verticals, small footprint, big results.

[ Hits: 2475 | Votes: 1 | Rating: 8 ]

Two portable antennas for 6-meter
VE7CA reprint an interesting article taken from arrl antenna compendium Two elegant practical and portable ...

[ Hits: 4794 | Votes: 1 | Rating: 10 ]

RF Choke with Bifilar Windings - rjbono
This article presents an RF Choke featuring an 11 bifilar turn winding of 14 house ...

[ Hits: 86 | Votes: 0 | Rating: 0 ]

Plumbers Delight J Pole Antenna Project
This article was reprinted to assist new hams at building their own 2 metre antenna ...

[ Hits: 5080 | Votes: 2 | Rating: 9 ]
Copper Cactus J pole 2 metter 70 Cm dualband - N7QVC
Homebrew a j pole 2mt and 70 cm antenna project Make it cheap This article ...

[ Hits: 10358 | Votes: 29 | Rating: 6.35 ]

2 Meters Lindenblad Antenna - Die_Bastelkammer
3d parts printed to build an EZ Lindenblad 2 Meters LEO Sat antenna as designed ...

[ Hits: 1421 | Votes: 2 | Rating: 4 ]

Build the K1FM-Loop - K1FM
The latest version of the K1FM Loop is electrically similar to the previous one but ...

[ Hits: 102 | Votes: 0 | Rating: 0 ]

Portable NVIS Loop for 80m to 40m - Mark E. Cantrell (AE7TO)
A portable 15 5 foot diameter NVIS loop for 3 5 to 7 3 MHz ...

[ Hits: 368 | Votes: 0 | Rating: 0 ]

Shrunken 40 Meter Phased Quads - N4JTE
A 2 element small footprint 40 meter phased, reversible, downsized quad array antenna.

[ Hits: 1151 | Votes: 4 | Rating: 8 ]

Meter Mate - SWR Graph Software
Meter Mate is a companion utility for your directional watt meter that allows you to ...

[ Hits: 1919 | Votes: 12 | Rating: 4.91 ]

Yeggi 3D printable Models for Ham Radio - Yeggi
Yeggi search engine results for amateur radio 3d printable models If you are looking for ...

[ Hits: 260 | Votes: 0 | Rating: 0 ]
Amateur radio 3D models - makexyz
3D printer models for Ham Radio accessories and parts like Crank knobs antenna insulators powerpole ...

[ Hits: 298 | Votes: 2 | Rating: 5 ]
3D Printed Accessories for the FT-817 and KX2 - VK3YY
DC plug adaptor using an XT60 connector 18650 Lithium battery 3 cell carrier Three band ...

[ Hits: 186 | Votes: 0 | Rating: 0 ]
3D Printer Makes Ham Antenna Portable - hackaday
An end fed antenna winder design that also contains the necessary matching toroid This would ...

[ Hits: 217 | Votes: 0 | Rating: 0 ]