raspberry rtl sdr

raspberry rtl sdr

Internet and Radio : WebSDR

• UR5WT WebSDR on 80m - This WEBSDR runs on Raspberry PI4-8G, Afedri-Net RX for 160m, RTL-SDR stick with homemade SBL1 mixer upconverter and fullsize 160m Delta loop antenna 4m up. Operated from Ukraine by UR5WT, US5WE and UX5DH,
  [ Hits: 154 | Votes: 1 | Rating: 9 ]

• Receiving GOES-16 Images with an RTL-SDR - Receive GOES-16 and GOES-17 Images with a Raspberry Pi and RTL-SDR dongle
  [ Hits: 188 | Votes: 0 | Rating: 0 ]

• RDF with Raspberry PI and RTL-SDR - The RasHAWK team has used a Raspberry Pi as the basis for a networked RF sensor capable of supporting spectrum monitoring, signal intercept and direction finding (DF) operations.
  [ Hits: 895 | Votes: 3 | Rating: 9 ]

• Raspberry Pi as RTL2832 Remote Server - Setting up a Raspberry Pi as Remote Server for RTL2832u SDR
  [ Hits: 1526 | Votes: 6 | Rating: 7.17 ]
• SDR Server with Raspberry Pi - Setting up a Raspberry Pi as a SDR Server with RTL-2832U USB dongle
  [ Hits: 1990 | Votes: 4 | Rating: 6.25 ]
• Raspberry Pi SDR Receiver - Get started with SDR using a Raspberry Pi and inexpensive RTL-SDR tuner.
  [ Hits: 4430 | Votes: 7 | Rating: 7.28 ]
• Using the Raspberry Pi as an RTL-SDR dongle Serve - The instructions listed here show you how to set up a Raspberry Pi for use as an RTL-SDR dongle server
  [ Hits: 936 | Votes: 6 | Rating: 8.5 ]
• MNM4SDR - Remote SDR software, if both a windows client that allow you to manage a remote Raspberry PI connected to a a RTL SDR and a Raspberry PI RTL-SDR server.
  [ Hits: 690 | Votes: 0 | Rating: 0 ]
• QrssPiG - QrssPiG is short for QRSS (Raspberry)Pi Grabber able to process I/Q stream from an rtl-sdr, HackRF or other sdr devices
  [ Hits: 363 | Votes: 3 | Rating: 10 ]
• Guide to decode SSTV with RaspberryPi and RTL-SDR - A tutorial on how to setup a receiver capable to decode SSTV signals with a small RaspberryPi version 2 and a RTL-SDR dongle. The author explains how to install the needed software to interface the RTL-SDR and a step by step guide to install the QSSTV software used to decode the signals.
  [ Hits: 333 | Votes: 1 | Rating: 1 ]
• WSPR monitoring with RTL-SDR and Raspberry Pi - The goal of this interesting project is to monitor a particular set of frequencies for a set period of time. In this article your will find instructions to build and operate an all-band WSPR node using cheap hardware and free software. At the end of this you'll have a Raspberry Pi, connected to an RTL-SDR dongle that monitors all of the WSPR frequencies rotating randomly every 15 minutes.
  [ Hits: 201 | Votes: 0 | Rating: 0 ]
• Raspberry Pi and Automatic NOAA Satellite Reception - How to receive automatically NOAA wather satellite images with a Raspberry Pi and a RTL SDR. This project requires a Raspberry Pi 3 Model B a common NooElec SDR Dongle and a QFH Antenna in the attic. Article explains how to setup and configure software but no instructions on antenna.
  [ Hits: 520 | Votes: 4 | Rating: 4.75 ]
• Low Cost FT8 WSPR Monitoring System - A tutorial on setting up a Low Cost QRP (FT8, JT9, WSPR etc) Monitoring Station with an RTL-SDR V3 and Raspberry Pi 3
  [ Hits: 272 | Votes: 0 | Rating: 0 ]
• Raspberry WSPR receiver - Tutorial- WSPR receiver with Raspberry Pi and RTL-SDR
  [ Hits: 219 | Votes: 1 | Rating: 8 ]

• SDR Receiver with RTL-SDR and Gnu Radio - This project is a Software Defined Radio Receiver. It has a frequency range of 24MHz 1.2GHz. It can demodulate AM, FM, USB, LSB with selectable bandwidths of 600, 2400, 2800, 3200 and 6400Hz. Using a simple RTL-SDR Dongle and Raspberry Pi 3 computer using GNU RADIO
  [ Hits: 484 | Votes: 1 | Rating: 1 ]