receive only
35 links
Pages: [prev] 1 2
Antennas : Loop- RX Loop Antenna for 80 and 160 Meters
- Four or Five turn one meter loop antenna for 80 and 160 meter band. This home made receive only antena can be assembled in a small place.
[ Hits: 247 | Votes: 1 | Rating: 1 ]
- Small Loop Antenna Array for HF Reception
- Receive-only loop antennas have some nice response characteristics that make them ideal when used for reception of skywave signals.
[ Hits: 932 | Votes: 1 | Rating: 9 ]
- Digirig Mobile
- Digirig is an open-source integrated digital modes interface for amateur radio.
As a differentiating feature, Digirig only requires a single USB connection to the computer with all the digital goodness packed in a single small enclosure. The internals include a USB hub, audio codec, a fully featured serial CAT (Computer Aided Transceiver) interface, and potentially other modules such as GPS receiver for time synchronization.
[ Hits: 148 | Votes: 1 | Rating: 2 ]
- Sound Card Packet
- This amateur radio website explains how to use the free AGWPE utility program to send and receive packet data using the sound card of your PC. Note that AGWPE is a Windows-only program. This website, which is hosted on SV2AGW's web site, focuses on support for the sound card packet features of AGWPE.
[ Hits: 90 | Votes: 1 | Rating: 8 ]
- Yaesu VX-2 jumpers
- This walkie is sold without the wide band receiver enabled, this is, only 144 and 432 MHz band
[ Hits: 579 | Votes: 3 | Rating: 2.67 ]
- Hear amateurs on your shortwave radio
- Allow the reception of amateur signals on domestic AM-only short wave receivers article and project by VK3YE
[ Hits: 734 | Votes: 1 | Rating: 10 ]
- Pass Recorder
- Pass Recorder is a small application that records audio from satellite passes based on tracking data it receives from the commonly used SatPC32 application
[ Hits: 186 | Votes: 0 | Rating: 0 ]
- MorseTeacher MorseMachine On-Line
- Learn morse code with this online version of the popular morse machine.
This version is currently working on Chrome browser only. This program teaches you to receive Morse code. It starts with a few letters and adds more when it sees that you are ready.
[ Hits: 175 | Votes: 3 | Rating: 8.33 ]
- SdrDx - OSX and Windows SDR Software
- OSX/Mac and Windows versions of SdrDx. Supports RFSPACE, FunCube Pro, Andrus MK1.5, AFEDRI, FunCube Pro Plus, Peaberry, RTL sticks (RTL supported under OS X only, via this OS X RTL server) and Softrock SDR receivers.
[ Hits: 967 | Votes: 3 | Rating: 7 ]
- Airgate
- A Receive-Only, Low-Power APRS iGate made with Arduino
[ Hits: 149 | Votes: 2 | Rating: 4 ]
- Understanding Impacts of 75-ohm Devices in 50-ohm Systems
- This article explores the implications of using 75-ohm devices, common in TV setups, within 50-ohm systems. While mismatched cables and connectors may lead to minimal consequences in receive-only setups, potential losses and reduced isolation in splitters and taps are examined. The article concludes that, for general applications, inexpensive TV-type components can offer reasonable performance with some trade-offs
[ Hits: 146 | Votes: 2 | Rating: 9.5 ]
- A 2 meter band-pass cavity using surplus Heliax
- Cavity is often required at a busy site to not only prevent its receiver from being overloaded by off-frequency signals, but also be a good neighbour and prevent low-level signals from your transmitter from getting into other users receivers - not to mention the preventing of those other signal from getting back into your transmitter to generate spurious signals in its own right.
[ Hits: 126 | Votes: 2 | Rating: 3 ]
- 30 m Band Direct Conversion Receiver
- The direct conversion receiver described consists of only a bandpass filter, mixer IC, VFO and audio filter. With only 22 parts, this simple circuit should take a few hours at the weekend to construct.
[ Hits: 768 | Votes: 1 | Rating: 4 ]
- Blocking Dynamic Range in Receivers
- An explanation of the different procedures and definitions that are commonly used for blocking dynamic range (BDR) measurements. Dynamic range in general is the ratio between the weakest signal a system can handle and the strongest signal the same system can handle simultaneously without an operator switching attenuators or turning volume potentiometers
[ Hits: 169 | Votes: 0 | Rating: 0 ]
- Sound Card Interface with Tone Keyer
- An improved version of the audio interface commonly used to connect a computer soundcard to a transceiver\'s receive and transmit audio circuits
[ Hits: 402 | Votes: 0 | Rating: 0 ]
Pages: [prev] 1 2
Not satisfied ? Lookup Google Custom Search Engine for receive only
Search receive only with: Yahoo!, DuckDuckGo
, Bing
Search
Related Searches
You can try similar terms
low receive receive only hf am receive antenna hf receive preamp how to receive beacons receive antenna receive antenna receive antenna hf receive antennas receive converter receive only antenna receive vertical shortwave receive broadband receive antenna discone receive antenna
Get our links, Everywhere!
Follow us on Social Networks
|
RSS Feeds |
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your site
Daily Top 10 links