remote s meter

remote s meter

Antennas : 160M

• Remotely controlled flag antenna - Flag antenna project for 160 meters band
  [ Hits: 936 | Votes: 0 | Rating: 0 ]

• 1 meter HF loop Antenna - Remotely tuned 1m diameter HF loop antenna for 7 to 29MHz by G8JNJ
  [ Hits: 3807 | Votes: 5 | Rating: 6.8 ]

• Triband Receiving Loop for 160/80/40m - A receiving only loop antenna for low bands, cover 160 to 40 meters with a remote antenna switch box well described and illustrated in this article
  [ Hits: 890 | Votes: 1 | Rating: 10 ]
• 160 Meters 4 Square Receive Antenna - A four square array receiving antena for the top band, performance is extremely directional and space requirements are really hard to fulfill.
  [ Hits: 181 | Votes: 1 | Rating: 10 ]

• F5RDS remote antenna tuner - An home made remote antenna tuner project that with a 6 meter random wire and two radials of about the same length, can tune from 40 to 10 meters without any issue.
  [ Hits: 347 | Votes: 2 | Rating: 2 ]

• VE6FI Contest station - Amateur radio, building antennas, wifi link, remote control of radio, 80 meter beam, contesting, ve6fi station
  [ Hits: 581 | Votes: 0 | Rating: 0 ]

• Your Remote S-Meter - A Kenwood R-5000 communications receiver located in Salt Lake City that you can remotely control and receive S-Meter readings and audio from via a web browser.
  [ Hits: 17435 | Votes: 73 | Rating: 7.71 ]

• Dunestar Systems - Manufacturer of single band and multiband transceiver bandpass filters for HF. High pass filters, two radoi headphones mix and switch, 6 meter portable antenna, antenna remote switching and steering.
  [ Hits: 1471 | Votes: 2 | Rating: 1 ]

• Thunderstorms Causing Sporadic E - A Case For Thunderstorms Causing Sporadic E on 6 Meters. In Propagation and Radio Science, Eric Nichols explains one possible mechanism is thunderstorms that are strong enough to break electrons free forming a cloud of free electrons.
  [ Hits: 83 | Votes: 0 | Rating: 0 ]

• Remote Power and SWR Meter Project - Remotely monitor the output power and SWR of your station via a web browser. WT32/ESP32 based project, combined with a directional coupler setup. It reads two voltages which are supplied by the directional couplers. From these, the respective power is calculated with the help of a calibration data table to be created by the user.
  [ Hits: 102 | Votes: 0 | Rating: 0 ]