rig interface

32 links

DigiLink - Compact Digital Mode USB Interface. DigiLink Nano is a very compact digital mode Ham Radio interface to connect your rig to a computer or tablet and run virtually any digital mode like PSK31, RTTY, FT-4/FT-8/JT-9/JT-65, Olivia etc.
[ Hits: 231 | Votes: 1 | Rating: 7 ]
Digirig Mobile - Digirig is an open-source integrated digital modes interface for amateur radio. As a differentiating feature, Digirig only requires a single USB connection to the computer with all the digital goodness packed in a single small enclosure. The internals include a USB hub, audio codec, a fully featured serial CAT (Computer Aided Transceiver) interface, and potentially other modules such as GPS receiver for time synchronization.
[ Hits: 150 | Votes: 1 | Rating: 2 ]

Reducing the Cable Mess - Optimizing the cable connections for cat control and audio input output by implementing the digirig mobile. A small audio and rig control interface, with a single USB cable supports most QRP radios requiring external audio and CAT control facilities
[ Hits: 155 | Votes: 0 | Rating: 0 ]

CAT Interface for Yaesu FT-817 and FT-100 - A Rig control CAT interface schematic suitable for both the Yaesu FT-817 and FT-100 transceivers.
[ Hits: 266 | Votes: 1 | Rating: 6 ]
FT-817 Audio Speech Compressor: Boosting Signal Power with SSM2165 - Designed for the FT-817, this audio speech compressor, centered on the Analog Devices SSM2165, offers a 40 dB compression range, enhancing signal power. Built externally with the SMD version to preserve warranty, the circuit interfaces smoothly with electret microphones. Testing shows a 6 dB average power increase. Adaptable to rigs with electret microphones, it maintains unity gain and 40 dB compression.
[ Hits: 60 | Votes: 0 | Rating: 0 ]

EA6DD WinLog - Win EA6DDlog free winows amateur radio logbook software in spanish offering cluster telnet connection, CAT interface via Omnirig, QSL management, QRZ and hmaqth connections
[ Hits: 849 | Votes: 3 | Rating: 9.33 ]

CATSync - The CAT Tool for WebSDRs. Allows to control public WebSDR receivers with a real rig connected via CAT control to your computer. It supports the classical WebSDR as well as Kiwi SDR interfaces Tune the VFO of your radio and see the web SDR follow in realtime
[ Hits: 355 | Votes: 4 | Rating: 7.75 ]

YAESU beam controller to suit RigExpert WTI-1 - Beam Controller Interface Project. The control system will be via the internet and consist of a Rig-Expert WTI-1 interface which provides access to CAT commands, PTT, and Rx and Tx audio.
[ Hits: 38 | Votes: 0 | Rating: 0 ]

Universal PC Headset Interface - This is a simple interface that will let you use your pc-multimedia headset on your ham rig. It’s a small plastic box with two sockets for the headset jacks.
[ Hits: 142 | Votes: 1 | Rating: 10 ]

DIY Interface for SSTV PSK RTTY Android Apps - A homemade interface for any android device, allow to receive and trasmitt SSTV PSK RTTY from an android tablet based on the DD7LP original project include demo of a sample DIY kit.
[ Hits: 347 | Votes: 0 | Rating: 0 ]
USB Rig Interface - This project is a USB Audio, Serial and PTT interface for rigs that does not directly support digital modes provided by applications such as FLDIGI, WSJT-X and JS8CALL. Plug these interface devices into your Windows or Linux laptop or Raspbian Raspberry Pi and you can send and receive digital tones to/from your rig and automate the frequency and mode control and PTT control.
[ Hits: 322 | Votes: 1 | Rating: 1 ]
AnyRig A Flexible Digital Mode Interface - This project uses an inexpensive Teensy microcontroller as the core of a flexible interface that provides a high-fidelity sound card and VOX functions for controlling the radio.The interface firmware supports variable VOX delay, CW and RTTY keying via audio (such as is available from Fldigi), and RTS and DTR control of any keying function, all via a single USB connection to the PC.
[ Hits: 143 | Votes: 0 | Rating: 0 ]