s meter add

34 links

TA-33m modification - Adding 17 meter band to Mosley TA-33M yagi antenna
[ Hits: 638 | Votes: 0 | Rating: 0 ]

2 meter HT Handipole - Add some gain over your rubber dummy load with this full size dipole on your HT.
[ Hits: 3187 | Votes: 1 | Rating: 1 ]

40m/80m Portable antenna ^pop - Portable wire antenna for 40 and 80 meter made with a RF Chocke. Can be adapted to work on 160 meters by adding additional 6.9 meters wire at its end.
[ Hits: 61553 | Votes: 29 | Rating: 5.96 ]

300 ohm twinlead 40 meter dipole - The N2CKH travel special 300 Ohm ladder line convertable antenna
[ Hits: 8578 | Votes: 3 | Rating: 5.67 ]

40 M. triangular full wave vertical loop - A 40 meters band full wave antenna project plan with model, adding the Missing Leg to the Inverted-L Antenna
[ Hits: 13288 | Votes: 11 | Rating: 7.08 ]

Multiband fan dipole antenna - A three-frequency multi-band dipole that can be extended easily to additional bands. This article includes a multiband fan-dipole antenna for 80-40-20-10 meter band.
[ Hits: 2460 | Votes: 6 | Rating: 9.17 ]

2 Meter J-pole from 450-Ohm Ladder Line ^pop - Great first time J-pole project. Covers most of the basics. This small and thin design also makes it good for several stealth applications.
[ Hits: 43390 | Votes: 49 | Rating: 7.04 ]
Portable 2 Meter J-Pole - This is a simple portable 2-meter J-Pole antenna. You start with a piece of 450-Ohm Ladder Line
[ Hits: 1089 | Votes: 2 | Rating: 5 ]

160 meter full wave loop antenna ^pop - The antenna is a 10 - 160 meter horizontal loop fed with 450 ohm ladder line all the way into the ham shack to an Palstar AT1500BAL balanced line antenna tuner
[ Hits: 97835 | Votes: 122 | Rating: 6.48 ]

The Thick Loop - The performance of a small magnetic loop can be improved constructing it larger, thicker or both. The antenna is covering from 12 Megahertz to 32 megahertz and adding a 156 Pico farads ceramic capacitor it resonates on the 40 meters band. by PY1AHD
[ Hits: 1040 | Votes: 0 | Rating: 0 ]

W4JOH Cobra Antenna - The original Cobra antenna, is a multiband 160 or 80 to 10 meter, designed by W4JOH is built using standard insulated wire of about 14 gauge and fed with 450 ohm ladder line down to the shack into a tuner.
[ Hits: 1710 | Votes: 1 | Rating: 10 ]

FL2100 - 12 meter band mod - Adding a full power output 12 meter band capability to the Yaesu FL-2100 despite of 10 meter.
[ Hits: 547 | Votes: 1 | Rating: 1 ]

17 Meters on a Hustler 5BTV - Convert a Hustler 5 band 5BTV to 17 Meters An easy add on antenna project by Larry, KK5ID
[ Hits: 1222 | Votes: 1 | Rating: 1 ]

Cushcraft A3S/A743 Performance - Cushcraft A3S performances with the A743 kit to add 30 and 40 meters
[ Hits: 754 | Votes: 1 | Rating: 8 ]
Cushcraft A3S - A743 - About the Cushcraft A3S with A743 add-on for 30 an 40 meters
[ Hits: 689 | Votes: 1 | Rating: 8 ]

Meter Mate - SWR Graph Software - Meter Mate is a companion utility for your directional watt meter that allows you to calculate the SWR reading when the forward and reflected power readings are measured. In addition to calculating the antenna system SWR Meter Mate will also plot the SWR curves of all of your antennas onto graphs that may be printed out.
[ Hits: 1919 | Votes: 12 | Rating: 4.91 ]

NFM - noise figure measurement - NFM (for Noise Figure Meter) is a software application to assist Noise Figure measurement. NFM implements the method of Agilent application notes AN 57-1 and AN 57-2 for noise figure measurement, but with the addition of an adjustable attenuator after the noise source and between the DUT and instrument.
[ Hits: 404 | Votes: 4 | Rating: 7.75 ]
Coil32 - Coil32 is a free coil inductance calculator, that allows to calculate: single layer and multi layer air core coils, toroidal air core coils, inductors on ferrite rings, in pot core, flat coils on the PCB, and also LC resonance parameters. The program have additional plugins to calculate another kinds of coils. The application is free for usage and distributing.
[ Hits: 1571 | Votes: 6 | Rating: 7 ]

59+ CW - Freeware Win32 application can be used for sending CW signal to the transceiver over a COM port or simply listening to Morse code on the speaker. The application is very easy to configure and will allow you to you to add new Morse characters set speed, tone, dash, dot, PTT line delay and other parameters. It is also possible to set shortcuts for call, QTH, name, RST and ANY other QSO field.
[ Hits: 25114 | Votes: 35 | Rating: 5.79 ]

Converting an HT-41 Hallicrafters Amplifier - An amplifier made using an old HT-41 Hallicrafters Amplifier and adding the 160 meters band By W4NFR
[ Hits: 697 | Votes: 2 | Rating: 8 ]