software for r 20

The DXZone.com

software for r 20

57 links

Ham Radio : Band Plans
  • XML Bandplan - Gerolf Ziegenhain created a structured XML file with the bandplan information, can be used by software developers as source for several usages.
    [ Hits: 395 | Votes: 0 | Rating: 0 ]
Manufacturers : Test Equipment
  • SWR ANTENNA ANALYZER + WSPR TX - Available worldwide can be used as Arduino Shield or plug it in to you PC , or with a bluetooth adapter connect to Android. With a highly optimized software, KAI200 brings you: a. Antenna analyzer form 1 up to 200 Mhz; b. WSPR transmiter (set up by serial terminal); c. Square Wave Signal generator KAI200 is all you need for your radio whatever it is Yaesu, Icom, Kenwood or Drake and DIY projects.
    [ Hits: 321 | Votes: 8 | Rating: 9.62 ]
Operating Modes : Digital Voice
  • FreeDV - Digital Voice for HF bands - FreeDV uses an audio codec as a software based modem to decode and encode the voice and text data from your computer. The data is encoded and then is transmitted over the HF radio using AF signals that can then in turn be decoded by the receiving station.
    [ Hits: 91 | Votes: 0 | Rating: 0 ]
Operating Modes : Meteors
  • WSJT introduction in QST - WSJT New Software for VHF Meteor-Scatter Communication QST Article December 2001 by K1JT
    [ Hits: 377 | Votes: 0 | Rating: 0 ]
Operating Modes : Satellites : CubeSats
  • Greencube (IO-117) Guide to Setup, Software and Operation - Explore the detailed setup, essential software, and operational nuances for Greencube (IO-117), a Medium Earth Orbit (MEO) satellite with a 70cm digipeater, offering DX possibilities for amateur radio enthusiasts. From antenna configurations to software choices, this guide covers everything for a successful Greencube experience.
    [ Hits: 136 | Votes: 0 | Rating: 0 ]
Operating Modes : Satellites : Weather Satellite Radio Equipment : HF Transceivers : Icom IC-7300
  • IC-7300 Quick Start Guide - PDF document for IC-7300 beginners. The ICOM IC-7300 is an HF + 6 meter, multi-mode, self-contained Software Defined Radio (SDR) transceiver with knobs, buttons and a touch screen. It also has a real-time spectrum display with pan adapter and water fall displays.
    [ Hits: 683 | Votes: 2 | Rating: 8 ]
Radio Equipment : HF Transceivers : Yaesu FT-920
  • FT-920 CAT Controller Software - This computer control program is specifically designed for the Yaesu FT-920 transceiver. Freeware windows application.
    [ Hits: 1404 | Votes: 3 | Rating: 7.67 ]
Radio Equipment : VHF-UHF Handhelds : Baofeng UV-5R
  • Fixing poor squelch levels on Baofeng radios - How to set new squelch values on Baofeng HT Radios by using the CHIRP software. Make sure you save the original configuration before editing squelch levels. Edit at your own risk.
    [ Hits: 218 | Votes: 1 | Rating: 10 ]
Software : Radio Control
  • GBCAT - GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
    [ Hits: 2526 | Votes: 44 | Rating: 9.14 ]
Software : Radio Programming
  • DMR Contact Manager - DMR Contact Manager is a Free software package designed to make it easy to maintain channel, zone, contact and call group information in these radios. It is fully compatible with the Ham-Digital and RadioID database systems and allows instant codeplug updates from a wide variety of sources. DMR Contact Manager is designed for use with Connect Systems CS700/CS701/CS750/CS800/CS801/CS800D radios, as well as the Tytera MD-380/390/390GPS, TYT MD2017/MD9600, AnyTone AT-D868UV and AT-D858, Retevis RT3, and similar radios that use the RDT/RDB file formats.
    [ Hits: 353 | Votes: 2 | Rating: 9 ]
  • Yaesu VR-120 Memory Manager - TK120 is an experimental memory management software for Yaesu VR-120 transceiver
    [ Hits: 41 | Votes: 0 | Rating: 0 ]
Technical Reference : Arduino
  • Automatic antenna switch with Arduino Nano - Arduino Nano board based antenna coax antenna switch intended for use with ICOM CI-V protocol. When is used alone with transceiver without PC control (CAT software, any logging software with CAT functionality), the CI-V transceive option in TRX setup shall be set to ON.
    [ Hits: 141 | Votes: 1 | Rating: 9 ]
Technical Reference : Raspberry Pi
  • Building a Raspberry Pi Satellite Tracker Interface - This article provides a step-by-step guide for assembling a Raspberry Pi-based Satellite Tracker Interface, designed to work with Green Heron Engineering's RT-21 controllers and MacDoppler software. The guide covers hardware assembly, SD card image installation, and system configuration for satellite tracking.
    [ Hits: 106 | Votes: 2 | Rating: 1 ]
Technical Reference : Software Defined Radio
  • ARJAN-5 5 band SDR  new - This project enhances Arjan te Marvelde's uSDR-pico by integrating a waterfall display feature. By adding an ILI9341 240x320 2.4" TFT display and modifying the software, the goal is to provide a panadapter to the existing transceiver. Initially developed with Visual Studio, the code was later migrated to Arduino IDE for Raspberry Pi Pico compatibility. The focus remains on preserving the original software, primarily enhancing the dsp.c file for waterfall implementation.
    [ Hits: 38 | Votes: 0 | Rating: 0 ]
Technical Reference : Software Defined Radio : RTLSDR
  • How RTL-SDR dongles work - Since 2012, the RTL-SDR is the simple and cheap way to give Software-Defined Radio a try. For about 25 euro you get a receiver covering much of the VHF and UHF range, and by either adding an upconverter, or using the direct sampling option, also the HF bands. They are so cheap because they are mass-produced as DVB-T receivers.
    [ Hits: 128 | Votes: 1 | Rating: 10 ]
Technical Reference : Sound Card Radio Interfacing
  • Connect you MacOS to CAT Serial Port - How to connect an Apple MacOS to a USB Radio transceiver. Get a Mac driver for ICOM IC-7100, IC-7200, IC-7300, IC-7600, IC-7610, IC-7850, IC-9100, PCR2500, Kenwood TS-890S, TS-990S, TS-590S, Elecraft KX3, K3S, Yaesu FTdx3000, FT-891, FT-991 or Ten-Tec Eagle USB direct connect built in USB/Serial adapter.
    [ Hits: 228 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for software for r 20


Search software for r 20 with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search