soun card software

soun card software

Pages: 1 2 [next]

• I5XWW Crispino Kits - Ham Radio Kits, soundcard interface for digimodes, usb CAT Interfaces, PA interface cables, connectors, DRM hardware and software, DRM converters
  [ Hits: 1751 | Votes: 7 | Rating: 8 ]

• SoftRock-40 - The SoftRock-40 is a small, low-cost, good-performing "software defined radio" receiver that plugs into a computer USB port and delivers I-Q audio signals to the computer's sound card. It was designed by Tony Parks, KB9YIG and Bill Tracey, KD5TFD as an "SDR sampler project" for hams everywhere to easily try out software defined radio.
  [ Hits: 8541 | Votes: 9 | Rating: 7 ]

• Mt-63 technical description - The MT-63 modem, constructed around a high speed DSP processor, either in a dedicated external DSP unit like the Motorola EVM, or in PC software using the PC sound card, transmits 64 tones spaced 15.625 Hz apart, in the 1 kHz bandwidth.
  [ Hits: 632 | Votes: 0 | Rating: 0 ]

• Frequency Calibration for Weak Signal Work - Accurate calibration of your receiver and sound card is necessary for good results with the weak signal modes in use at LF. Modern receivers with master oscillators that are synthesized to provide all conversion frequencies greatly simplify the process. This article describes a method of making the necessary measurements and adjustments to an ICOM R75 receiver and a sound card, using the ARGO software
  [ Hits: 873 | Votes: 1 | Rating: 7 ]

• WACARS  ^{updated  pop} - The only ACARS software to feature in-line message decoding and aircraft tracking. ACARS Reception and Decoding Software for legacy Windows versions. This software will allow you to decode the ACARS signals received by your air band receiver using the soundcard that is installed in you PC
  [ Hits: 38714 | Votes: 92 | Rating: 4.94 ]

• RoMac 10 Band Equalizer - 10 Band DSP Equalizer for Ham Radio, requires Win 98 or higher, 128 MB, 16 bit sound card.
  [ Hits: 2645 | Votes: 5 | Rating: 7 ]
• ComTekk Tone Generator - ComTekk Software Tone generator for 2-way radio signaling. Use sound card to generate CTCSS, DTMF, tone remote, ANI and more. Synthesizer for simulation and testing of 2-way radio systems, repeaters, remote control, ANI, Paging and more
  [ Hits: 3074 | Votes: 2 | Rating: 1 ]

• LAN-LINK for windows  ^updated - Multimode suite, feature logging, Internet interface to CXCluster, Smart multi-mode controller software, contest, APRS, and PSK31 via Sound card. Free and Commercial version available.
  [ Hits: 5985 | Votes: 28 | Rating: 5.93 ]

• Dire Wolf - Dire Wolf is a software soundcard modem and APRS encoder/decoder. It can be used stand-alone to receive APRS messages, as a digipeater, APRStt gateway, or Internet Gateway (IGate). It can also be used as a virtual TNC for other applications such as APRSIS32, UI-View32, Xastir, APRS-TW, YAAC, UISS, Linux AX25, and many others.
  [ Hits: 2731 | Votes: 12 | Rating: 8.67 ]

• MT Hell - MT-Hell software for 16 bit Soundblaster cards. Sends seven parallel tones with careful dot shaping for minimum interference, and transmits a very nice sound by G3PPT
  [ Hits: 591 | Votes: 0 | Rating: 0 ]

• CW Player  ^updated - CW Player version 4 is a simple freeware program generates Morse characters and Q codes. It needs a sound card and at least Windows XP. It can generate morse code from text files, and it includes also a simple decoder function. This is a useful piece of software if you want to learn morse code reception.
  [ Hits: 24269 | Votes: 123 | Rating: 7.73 ]

• Soundcard Oscilloscope - PC based Soundcard Oscilloscope software that receives its data from the Soundcard with 44.1kHz and 16 Bit resolution.
  [ Hits: 3273 | Votes: 10 | Rating: 6.9 ]

• OscarDelta IP Over AX.25 - This is a packet radio software developed for amateur radio operators to provide IP communications. You can chat, send/receive e-mail, surf the web and so on via radio depending on your bandwidth. You don't need a TNC. You might have all of TNC features via SoundCard using SoundModem.
  [ Hits: 1698 | Votes: 23 | Rating: 8.87 ]

• BTL Blaster TeLetype - High performance RTTY reception and transmission software, need a Sound Blaster compatible sound card.
  [ Hits: 9510 | Votes: 13 | Rating: 6.76 ]

• MMSSTV - MM Hamsoft  ^pop - SSTV freeware software for Windows by Mako JE3HHT. An excellent SSTV program that requires only a computer with soundcard, no expensive TNC required. Works on all Windows version including Windows XP, Vista and Windows 7
  [ Hits: 50754 | Votes: 193 | Rating: 6.94 ]

• WINRAD by I2PHD - Winrad is a free software program designed to implement a Software Defined Radio (SDR), meant to run under Windows XP, Windows 2000, or Windows 98SE. In a nutshell, it accepts a chunk of up to 96 kHz coming from a complex mixer in form of two signals, I and Q, fed to the PC sound card.
  [ Hits: 20151 | Votes: 31 | Rating: 5.67 ]
• SDR Sharp - SDR# (read SDR Sharp) is a high performance Software Defined Radio application. SDR sharp is a fully featured SDR capable of handling samplerates from kHz level soundcards up to multi hundred MHz dedicated samplers, thanks to its multi-core architecture.
  [ Hits: 2445 | Votes: 8 | Rating: 7.5 ]

• Zelscope  ^pop - Zelscope is a Windows software that converts your PC into a dual-trace storage oscilloscope and spectrum analyzer. It uses your computer's sound card as analog-to-digital converter, presenting a real-time waveform or spectrum of the signal - which can be music, speech, or output from an electronic circuit.
  [ Hits: 71204 | Votes: 29 | Rating: 5.32 ]
• Noise Meter - Noise Meter software for the noise meter tool by G8KBB that measure noise using a PC sound card and calculate noise figures by means of a calibrated noise source.
  [ Hits: 759 | Votes: 1 | Rating: 4 ]

• SDR-908 Portable SDR - The SDR-908 is a software defined radio designed specifically for portable use, without the bother of being tethered to a PC or soundcard for the modulation/demodulation processing performed in this kind of radio.
  [ Hits: 1244 | Votes: 0 | Rating: 0 ]

Pages: 1 2 [next]