the easy way

the easy way

Antennas : 20M : 20 meter Vertical Antennas

• The Vertical Buddi Beam for 20m - The Vertical Buddi Beam on 20m using no Coils. n this article I am going to describe a totally new way to construct and use a very old design the two element Yagi antenna. Unlike the traditional Yagi this design does not require a Tower or a boom, it is 100 percent portable and most important high- performance and easy to assemble using standard Buddipole components.
  [ Hits: 579 | Votes: 2 | Rating: 4.5 ]

• Coax Stubs for 20m and 40m - When operating contest in a multi transceiver environment interferences between the 40m and 20m are guaranteed. An easy and inexpensive way to reduce interferences is to add coax stub filters
  [ Hits: 243 | Votes: 4 | Rating: 8.5 ]

• Basic Microwave Antennas - Utility-Driven Tradeoff Analysis, if you want to geto on the microwave bands , you will have to choose the proper antenna for your operating conditions. How to decide is not always easy, and you may also decide to build your own antenna.
  [ Hits: 359 | Votes: 1 | Rating: 9 ]

• The Easy Way Antenna Systems - This document is a must read for anyone considering building a good low cost HF multi-band antenna system. The author combine in this document four important ingredients to produce simple but effective antenna system, like antennas of non resonant length, line attenuation, the transmatch and the balun
  [ Hits: 632 | Votes: 2 | Rating: 4.5 ]

• Modifications to the Diamond V2000 and similar antennas - This kind of antenna has grown in popularity over the last years because it gives you a decent performance and triband capabilities. But its 50 MHz design is far from optimal. Here you can learn how to improve its 50 MHz performance in a very easy way.
  [ Hits: 631 | Votes: 2 | Rating: 9.5 ]

• PSK31 The Easy Way - An illustrated and printable introduction to PSK 31 by by Alan J. Gibbs, VK6PG
  [ Hits: 914 | Votes: 1 | Rating: 10 ]

• IC-7300 and WSJT-X Setup - WSJT-X FT8 and the Icom 7300 the Easy Way. If you are looking for an easy way to try out the new WSJT-X FT8 mode, this article is for you
  [ Hits: 267 | Votes: 0 | Rating: 0 ]

• Ham Log - Ham Log is an easy to use yet powerful QSO logging utility for all devices running Palm OS. Ham Log's design and functionality was designed to meet my needs when mobile and away from my home station.
  [ Hits: 1085 | Votes: 0 | Rating: 0 ]

• Hostilog - Hostilog is a logging program for HamRadio it uses a very easy way to enter qso data without any usage of a mouse. You can enter around 300 to 400 QSOs per hour from a paper written logbook, which is really quick compared to other logging programs. Combining and sorting of ADI Files are included
  [ Hits: 62 | Votes: 0 | Rating: 0 ]

• Axis Spectrum Analyzer - Axis Spectrum Analyzer allows you to record audio along with sincronized 31 band spectrum analyzer readings from any audio source to be inputed into Macromedia Flash movies in an easy to integrate way. The software can also be used to display real-time audio with customized visuals on video devices such as projectors, tvs,etc.
  [ Hits: 11256 | Votes: 5 | Rating: 4.2 ]

• Replacing the battery of the Yaesu DVS-2 memory recorder - After a few years the lithium battery cell from the Yaesu DVS-2 will be exhausted. To replace the battery in the future there is a more easy way, than replacing it with the same type of battery as installed in the DVS-2.
  [ Hits: 313 | Votes: 1 | Rating: 8 ]

• Mini Ring Core Calculator  ^updated - The easy way to calculate toroid cores.
  [ Hits: 2056 | Votes: 19 | Rating: 6 ]

• 500mw CW Transmitter - A very quick and easy way to get on the air is to build a "Michigan Mighty Mite" CW transmitter for 160, 80, 40 or 30 meters. It can't get simpler than this. It has very few parts, costs almost nothing, and it works! Cost estimate $10 by VE6WTF
  [ Hits: 9553 | Votes: 9 | Rating: 5.78 ]

• Building The Fox-in-a-Box - Raspberry Pi Telemetry Station project by Burns Fisher, WB1FJ , Chris Thompson G0KLA/AC2CZ. A step by step guide on Building a Fox-In-A-Box The Easy Way, A Prebuilt SD Card Image or from scratch.
  [ Hits: 119 | Votes: 0 | Rating: 0 ]

• A Wifi (V)SWR Meter - When building antennas for the Wifi band , a need for an easy way to check the antennas arise. This is a project for a 2.4 GHz band SWR Meter
  [ Hits: 1163 | Votes: 6 | Rating: 4.83 ]
• WiFI vSWR Meter - When building antennas for the Wifi band (Like the 8dBi omni), a need for an easy way to check the antennas arose. A Voltage Standing Wave Ratio (VSWR) meter useable at the 2.4GHz band is however, hard to find.
  [ Hits: 131 | Votes: 2 | Rating: 3.5 ]

• Measuring SWR at 1296 MHz - Have you been looking for an easy way to measure power or SWR at 1296 MHz? One thing is certain, it is not easy - simply because the normal range of SWR meters that most of us have is not up to 1300 MHz.
  [ Hits: 250 | Votes: 0 | Rating: 0 ]