usb cable

usb cable

Manufacturers : Cable and Connectors

• I5XWW Crispino Kits - Ham Radio Kits, soundcard interface for digimodes, usb CAT Interfaces, PA interface cables, connectors, DRM hardware and software, DRM converters
  [ Hits: 1751 | Votes: 7 | Rating: 8 ]
• Farallon Electronics - PACTOR mode radio modems and accessories, performance sailing electronics and innovative hard to find parts. Audio cables, packet cables, usb to serial converters
  [ Hits: 808 | Votes: 0 | Rating: 0 ]

• Noolec - Software Defined Radio parts, RTL-SDR DVB-T USB Stick, cables, antennas, upconverters, leds delaer
  [ Hits: 734 | Votes: 4 | Rating: 7.25 ]

• Reducing the Cable Mess - Optimizing the cable connections for cat control and audio input output by implementing the digirig mobile. A small audio and rig control interface, with a single USB cable supports most QRP radios requiring external audio and CAT control facilities
  [ Hits: 155 | Votes: 0 | Rating: 0 ]

• Programming the Baofeng UV-3R - How to program memories on UV-3R using the prolific usb cable
  [ Hits: 2264 | Votes: 2 | Rating: 4 ]

• Icom ID-51A Programming Cable and Software - RT systems produce and sell Icom ID-51A programming software and usb cable. The WCS-D51 works with ID-51A and ID-51E
  [ Hits: 310 | Votes: 1 | Rating: 9 ]

• Yaesu VX-2 USB programmin interface - DG6RBP homebrew project for a USB cable progtamming interface for the Yaesu VX-2 radio
  [ Hits: 2150 | Votes: 4 | Rating: 5 ]

• Programming Yaesu FT-8800R - Programming the FT-8800R via the front panel and microphone keypad is not extremely difficult. Already having a list of local repeaters in CHIRP, the addition of a USB cable would allow you to coordinate the memory layout across multiple radios with ease.
  [ Hits: 297 | Votes: 1 | Rating: 1 ]

• doozy DStar for Windows - With Doozy for Windows you can make QSO’s via your Windows PC on DSTAR ( DPLUS, DEXTRA, DCS and XLX ). There is no need for a hotspot. Just connect your ICOM IC-705 to your Windows PC with an USB datacable and connect it to your favorite DSTAR reflector/repeater.
  [ Hits: 413 | Votes: 2 | Rating: 10 ]

• dmrconfig - DMR Radio Programming Utility - DMRconfig is a free utility for programming digital radios via USB programming cable. DMRConfig support several DMR transceivers by TYT, Baofeng, Anytone, BTECH, Zastone, Radtel.
  [ Hits: 652 | Votes: 4 | Rating: 8.25 ]

• Barest of bones APRS RF position reporter - Super Simple APRS Position Reporter. This project idea has been in response to the more hardware heavy Raspberry Pi projects that involve extra TNC hardware, additional sound cards, and custom cabling. This APRS position reporter is done using a Raspberry Pi B+, USB GPS receiver, Baofeng UV-5R, and a mono 3.5mm audio cable between the Pi and HT.
  [ Hits: 183 | Votes: 0 | Rating: 0 ]
• Building an Enhanced APRS IGate with Debian 12 and Raspberry Pi - The guide outlines necessary components, including a 2m FM analog radio, USB audio adapter, and Raspberry Pi. Building a cable to connect these elements is assumed, as is knowledge of Raspberry Pi OS installation.
  [ Hits: 58 | Votes: 0 | Rating: 0 ]

• USB-C charging for Handheld Radio Transceivers - The article highlights the common absence of modern USB-C ports on handheld ham radios and the limited use of USB for power. The author, [jephthai], shares a solution involving a USB-C cable with power negotiation capabilities, allowing the radio to be powered by USB. By splicing Anderson power pole connectors onto the cable, the radio can now be conveniently powered by a USB battery bank, providing a practical alternative to traditional 12 V batteries for off-grid operations.
  [ Hits: 142 | Votes: 1 | Rating: 10 ]

• USB Kenwood cable as Yaesu FT-857 817 CAT cable - Adapting a Wouxun/Kenwood USB cable as a Yaesu FT-817 FT-857 FT-897 CAT connection
  [ Hits: 674 | Votes: 1 | Rating: 1 ]
• DIY Yaesu Data Cable - A homemade data cable for the Yaesu FT-2D made with a a simple USB-RS232 converter with pl2303 chipset
  [ Hits: 628 | Votes: 4 | Rating: 4.75 ]

• A Simple Raspberry APRS Position Reporter - Barest of bones APRS RF position reporter using a Raspberry Pi B+, USB GPS receiver, Baofeng UV-5R, and a mono 3.5mm audio cable between the Pi and the radio
  [ Hits: 329 | Votes: 0 | Rating: 0 ]