use tower antenna

use tower antenna

Antennas : 160M

• A Lowband Antenna that is Almost Free - The Shunt-fed Tower, an effective Low Band Antenna, uses your beam as a capacitive top-hat and only needs a simple feed network and a good ground system to work DX on 80M and 160M.
  [ Hits: 18747 | Votes: 4 | Rating: 7.75 ]
• VE6FI 160 Meter Antenna - This is a 160 meter antenna which is a shunt fed vertical. A 72 foot Trylon tower with a 6 element 15 meter mono bander mounted on the top is used as the radiating element.
  [ Hits: 1713 | Votes: 0 | Rating: 0 ]

• The Vertical Buddi Beam for 20m - The Vertical Buddi Beam on 20m using no Coils. n this article I am going to describe a totally new way to construct and use a very old design the two element Yagi antenna. Unlike the traditional Yagi this design does not require a Tower or a boom, it is 100 percent portable and most important high- performance and easy to assemble using standard Buddipole components.
  [ Hits: 579 | Votes: 2 | Rating: 4.5 ]

• End Fed Antenna for WARC Bands - I used a FT 240-43 for much more power, not needed but beter safe than sorry. 150 Watt continious, 300 Watt PEP SSB, 90 Watt Digimodes 10 Mhz, 18 Mhz, 24 Mhz Very easy to build design and a good antenna for people who don't have much space for big towers or long wires This design is from Hans - PE1RNU
  [ Hits: 187 | Votes: 1 | Rating: 3 ]

• TX Four Square Antenna - A 220-ft tower that has five catenary lines, each about 500 feet long. Four of these lines, running NE, SE, SW, and NW support four 1/4-wavelength wire verticals used in a 160-meter four-square antenna.
  [ Hits: 787 | Votes: 0 | Rating: 0 ]

• The Lindenblad Antenna: The Ultimate Satellite Omni Directional Aerial - This Antenna project is a bit more complex than other omni antennas for satellite use, but it is much easier and cheaper than a standard tower mounted circular polarized azimuth and elevation rotating beam system.
  [ Hits: 442 | Votes: 5 | Rating: 6.8 ]

• K0UO Rhombix Antenna Farm The Ground - Modeling an antenna over real terrain gives you a visual picture of how terrain impacts performance. You can use a model to determine optimum height for antennas on an existing tower, Compare different tower locations for performance, Compare different sites for performance
  [ Hits: 144 | Votes: 1 | Rating: 10 ]

• MacFarlane Electronics - Canadian dealer, specializes in supply and installation of free-standing towers for commercial and amateur radio use. We also supply ham transceivers, antennas, rotors and accessories.
  [ Hits: 1386 | Votes: 0 | Rating: 0 ]

• Tower - Windows program for analyzing vertical antennas. This program shows the resistance and reactance to be expected looking into a cylindrical metallic tower over a perfect ground. It gives a useful approximation of the values to be expected in a real-world situation.
  [ Hits: 1345 | Votes: 1 | Rating: 10 ]

• The Ufer Ground - Ufer techniques are used in building footers, concrete floors, radio and television towers, tower guy wire anchors, light poles, etc.
  [ Hits: 412 | Votes: 0 | Rating: 0 ]