uses of vertical antenna

uses of vertical antenna

Antennas : 160M

• The 160M Homebrew Vertical - The 160M "No Excuses" Homebrew Vertical is a 27 ft. vertical antenna, made from three 10 ft. PVC sections bolted together, and half wavelength of antenna wire helically wound around the PVC sections by K6MM
  [ Hits: 6587 | Votes: 15 | Rating: 6.14 ]
• The 160M No Excuses Homebrew Vertical - This antenna is designed for stations having a difficult time putting a decent signal on 160M from small or CC&R d lots. It is a 24.5 ft. vertical antenna, made from three 10 ft. PVC sections bolted together, and half wavelength of antenna wire helically wound around the PVC sections.
  [ Hits: 405 | Votes: 0 | Rating: 0 ]

• 30m vertical dipole - The 30 Meter Vertical Dipole is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses a T-section of PVC pipe. The coax loops through the PVC pipe to provide strain relief. by W1TR
  [ Hits: 2050 | Votes: 2 | Rating: 4.5 ]

• 80 Meter Vertical Loop - The 80 meter vertical loop is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses a 6 inch section of half inch diameter PVC pipe Article by W1TR
  [ Hits: 980 | Votes: 4 | Rating: 7.75 ]

• Drive-On Antenna Mast For POTA - This antenna mast mount uses two Reese hitch extensions that are welded on to a piece of 2 inch square tube. It comes apart in two pieces. The vertical pipe on the left is welded on to a 2 inch piece of square tube that fits into the Reese hitch extension.
  [ Hits: 156 | Votes: 1 | Rating: 9 ]