windom balun

windom balun

Antennas : Baluns

• OH7SV Windom baluns - Windom baluns for kilowatt range made with two ferrite toroidal cores amidon ft-140-61 and another schema with two ferrite rods
  [ Hits: 3834 | Votes: 11 | Rating: 7.64 ]

• Feeding an End-Fed Antenna - End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.
  [ Hits: 21457 | Votes: 22 | Rating: 7.33 ]

• LU9DPD Windom dipole - A multiband windom dipole antenna for 80 40 20 10 meters, feeded with a home made 4:1 balun, in spanish.
  [ Hits: 5342 | Votes: 5 | Rating: 6 ]

• OH7SV Matti Hohtola Ham Projects - The most modern QRP transceiver in 2004,Direct Conversion HF Transceiver with DDS LO, 50 ohm to 200 ohm HF wide band transformers, Wilkinson splitter for RX measurements, Windom baluns 2001/2004, Ferrite rod antenna for 80 meter, Magnetic Loop Antenna for 80 m, Mascot Switched PSU 9320 modification to 8A peak current, 150W MOSFET linear amplifier for 80m, 80 m HF SSB/CW Transceiver
  [ Hits: 20374 | Votes: 36 | Rating: 8.11 ]
• Windom Antenna with 4:1 balun - The Windom is an Off-center wire multiband Antenna. The old version was fed just by a single-wire connected on 1/3 of antenna's overall length or with an open-line feeder (later versions). Here is another model with coaxial feeder, which is compatible with Solid States - 50 Ohm output transceivers .
  [ Hits: 8027 | Votes: 9 | Rating: 6.89 ]
• The Coax-Fed Windom - Classical coax-fed, off-center-fed dipole, feeded with a 4:1 Guanella balun
  [ Hits: 1214 | Votes: 2 | Rating: 8.5 ]
• Windom Antenna 3.5-30 MHz - A windom multiband antenna project with pictures and diagram for the 6:1 balun
  [ Hits: 3472 | Votes: 10 | Rating: 6.7 ]
• Build your own Windom Antenna - Building a Windom HF Antenna. A PDF file presentation about homebrewing a windom antenna for the HF bands with formulas for 40 and 80 meters bands and step by step guide on making a 4:1 balun to feed the antenna.
  [ Hits: 772 | Votes: 2 | Rating: 10 ]

• Anteny SP1BKS - Antenna manufacturer from Poland, produce dipole wire antennas, W3DZZ FD4 Windom and long wires, baluns, dealer for toroids and connectors managed by Leszek Mlynarczyk SP1BKS
  [ Hits: 2635 | Votes: 4 | Rating: 3.5 ]