windows 8

104 links

pocketVNA - portable Vector Network Analyzer - A 500 kHz to 5.5GHz 2-port vector network analyzer designed for use with any Linux, Windows or MacOS computer. High performance: up to 80 dB dynamic range in the MHz range; up to 40 dB in the GHz range
[ Hits: 534 | Votes: 1 | Rating: 1 ]

IC706_BKT CAT Icom Radio Control - IC706_BKT CAT is used to control the transceiver Icom IC-706, IC-706MKII IC-706MKII/G and IC-718 from the personal computer. Works on Windows and is available in free and free donation version
[ Hits: 362 | Votes: 0 | Rating: 0 ]

AUDIO590 - Audio Setup for TS-590 - Audio590 is a Windows program that lets you set up and manage audio profiles for use with a TS-590SG or TS-590S transceiver. You can read existing audio settings from the radio, display them on the control panel, change them and then write them back to the radio. You can also save the settings on disk, and retrieve them later when you need them.
[ Hits: 185 | Votes: 0 | Rating: 0 ]

How to setup Yaesu FT-847 Doppler Control with PstRotator - How to setup the Yaesu FT-847 along to the PSTRotator under Windows 10 PC with Omnirig.
[ Hits: 219 | Votes: 0 | Rating: 0 ]

Yaesu FT-857 CAT Controller - Free windows basic and simple CAT program specifically for the Yaesu FT-857 radio. It provides an unlimited memory storage area which resides on the client side.
[ Hits: 2371 | Votes: 8 | Rating: 8 ]

Yaesu FT-991 Memory Manager - Free memory management software for the Yaesu FT-991 and FT-991A models. It runs only on Windows 7, 8, 8.1, 10 both 32 and 64 bits, it also permits basic remote control features and allow backup and restore settings and memories. Documentation in mainly in French.
[ Hits: 1424 | Votes: 7 | Rating: 6.61 ]

Small Loop Antenna Calculator by KY8D - A free Labview antenna calculator program. This interesting calculator for small loop antennas can be ran on most recent Windows versions using the Labview runtime.
[ Hits: 340 | Votes: 4 | Rating: 6.5 ]

Resistor Color Code Calculator ^updated - Calculate the value of an unknown resistor with this free program for windows
[ Hits: 761 | Votes: 20 | Rating: 5.04 ]

The DxDozer - Ultimate HAM Radio LogBook for Windows for both beginners and experienced Dxers. It features several functions like complete logbook with powerfull search capabilities, FT8 and LoTW integrations, DX cluster. Cat Interface to control your radio, licence is based on yearly subscription.
[ Hits: 197 | Votes: 2 | Rating: 9.5 ]

JTDX ^updated - JTDX (JT Digital Modes for Linux, MacOS and Windows) is a free, open-source software for amateur radio operators for the reception and transmission of digital modes, including JT65, JT9, and FT8, among others. JTDX is designed to provide improved decoding of weak signals and better usability compared to other digital mode software like WSJT-X. It also has features like a real-time spectrum display, logging, and decoded message storage and retrieval. Download JTDX from the official site.
[ Hits: 3368 | Votes: 7 | Rating: 8.43 ]

Soundmodem UZ7HO - Soundmodem is a free software defined dual-port Packet-Radio TNC that implement a soundcard as a modem and supports AX.25 protocol. Soundmodem has been tested on Windows XP, Vista, 7, 8, 10 and has proved stable in operation. The Soundmodem may be used to build EMCOMM, APRS, BBS, Node station, for satellites
[ Hits: 609 | Votes: 1 | Rating: 1 ]

Win4IcomSuite ICOM Radio Control Software - The Ultimate Control Software for the IC-7300, IC-7610, IC-7600, IC-7850, IC-7851 and Others is a control software suite that includes additional interesting features such as support for the built in Spectrum Scope, Audio monitors, Shortwave DB, CW Terminal, Clublog Spotting, Memory management, interface to Ham Radio Deluxe Logbook, DM780, n1mm+, log4om, DXLab and other. Runs on Windows OS, commercial licence.
[ Hits: 364 | Votes: 1 | Rating: 1 ]
WFView Open Source interface for Icom transceivers - Wfview is a program that allows many modern Icom ham radio transceivers (such as the IC-7300, IC-9700, IC-7610, IC-R8600 and many others) to be controlled via a computer. wfview shows the gorgeous spectrum display on whatever display is connected, including projectors, touch screens, and TVs. wfview allows for full radio control from a computer keyboard and basic control from a numeric keypad. It works under Windows, Linux and MacOS
[ Hits: 361 | Votes: 2 | Rating: 10 ]

Olinca TH-888 SV8 Programming Software - Free windows software to program or reset cara ht olinca th888a and th888S th888 th10 th2100 th2uv th9 handheld VHF UHF two way radios
[ Hits: 633 | Votes: 14 | Rating: 6.07 ]

NetTime for Windows - NetTime is a simple and free software to sync your computer clock via internet. Very useful tool for FT8 FT4 operating modes.
[ Hits: 1458 | Votes: 0 | Rating: 0 ]
BktTimeSync - BktTimeSync synchronizes the PC time using an internet time server (NTP server) or a GPS receiver connected to USB, serial port or Bluetooth. Great for use with digital modes like FT8, JT65, JT9, JS8Call and others. For the operation of this program requires an active internet connection or a GPS receiver. This program works on all versions of Windows 32 or 64 bit
[ Hits: 1703 | Votes: 3 | Rating: 6.67 ]
GPS time - GPSTime is a small freeware applet that corrects your PC clock using GPS. GPSTime reads the serial data coming out of your GPS receiver and decodes the $GPRMC messages to determine the precise UTC time. Works on Windows Vista/7/8/10 with PC with serial ports.
[ Hits: 641 | Votes: 0 | Rating: 0 ]
ToyNtp - ToyNTP is a simple freeware time server for Windows that implements the SNTP protocol and uses a GPS receiver, Garmin GPS 18x LVC, as time reference. ToyNTP was designed to be used with Faros in the locations where access to the SNTP servers on the Internet is not available, but it may be used for other purposes as well, in particular, it may be configured to keep the PC clock synchronized to a GPS receiver.
[ Hits: 134 | Votes: 1 | Rating: 1 ]

MSHV - MSHV is a free windows and linux multimode software that support weak signal digital modes like MSK144 MSKMS JTMS FSK441 FSK315 ISCAT JT6M FT8 FT4 JT65 PI4 amateur radio modes. MSHV features several interesting features including the Multi Answering Auto Seq Protocol, allowing multiple signal transmissions to be used during dx peditions.
[ Hits: 1328 | Votes: 6 | Rating: 8.5 ]

USB Rig Interface - This project is a USB Audio, Serial and PTT interface for rigs that does not directly support digital modes provided by applications such as FLDIGI, WSJT-X and JS8CALL. Plug these interface devices into your Windows or Linux laptop or Raspbian Raspberry Pi and you can send and receive digital tones to/from your rig and automate the frequency and mode control and PTT control.
[ Hits: 322 | Votes: 1 | Rating: 1 ]