wire feed point

The DXZone.com

wire feed point

14 links

Antennas : 160M

  • 160 Meter Ground Plane - The 160 meter ground plane is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoints / tiepoints use PVC pipe T-sections Article by W1TR
    [ Hits: 862 | Votes: 1 | Rating: 9 ]
  • 160 Meter Dipole - The 160 meter dipole is constructed from #12 stranded insulated wire available in most hardware stores. The feedpoint uses a section of PVC pipe Article by W1TR
    [ Hits: 1115 | Votes: 2 | Rating: 6 ]
Antennas : 20M
  • W5GI Mystery Antenna  pop - W5GI Mystery Antenna is a multi-band wire antenna that performs exceptionally well even though it confounds antenna modeling software. This antenna covers 80 to 6 meters with low feed point impedance and will work with most radios, with or without an antenna tuner. It is approximately 100 feet long, can handle the legal limit, and is easy and inexpensive to build. It is similar to a G5RV but a much better performer especially on 20 meters.
    [ Hits: 139383 | Votes: 123 | Rating: 7.55 ]
Antennas : 30M
  • 30m vertical dipole - The 30 Meter Vertical Dipole is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses a T-section of PVC pipe. The coax loops through the PVC pipe to provide strain relief. by W1TR
    [ Hits: 2050 | Votes: 2 | Rating: 4.5 ]
Antennas : 40M : 40 meter Loop Antennas
  • 40 Meter Horizontal Loop - The 40 meter horizontal loop is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses PVC a pipe T-section. The coax loops through the T-section to provide strain relief by W1TR
    [ Hits: 1540 | Votes: 0 | Rating: 0 ]
Antennas : 80M
  • 80 Meter Ground Plane - The 80 meter ground plane is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses PVC a pipe T-section Article by W1TR
    [ Hits: 1271 | Votes: 5 | Rating: 5.8 ]
  • 80 Meter Vertical Loop - The 80 meter vertical loop is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses a 6 inch section of half inch diameter PVC pipe Article by W1TR
    [ Hits: 980 | Votes: 4 | Rating: 7.75 ]
Antennas : Beverage
  • Beverage Antenna Construction - Types of beverage wires, choose best supports and insulators, multiple antennas at one feedpoint, all well documented with photos and exaustive explanation. This article offers insights on building Beverage antennas for optimal reception. Key takeaways include using strong wire (copperweld or electric fence), proper termination, and a good grounding system (multiple copper rods). The author recommends maximizing antenna length and orienting it towards desired stations. For best results, utilize an antenna tuner and experiment with termination resistors.
    [ Hits: 15519 | Votes: 9 | Rating: 8.45 ]
Antennas : Delta loop
  • 160m Inverted Delta Loop - This 160 meter Delta Loop antenna is made of Hard drawn copper wire AWG 10, the two upper side are 148.5 foot each base wire is 240.9 foot, the feed point at 30.69 foot to one corner, feed with 450 Homs balanced line to an antenna tuner on the ground, then with 50 homs coax to the shack.
    [ Hits: 114 | Votes: 0 | Rating: 0 ]
Antennas : Dipole
  • Speaker Wire Doublet Antenna - A portable wire antenna for the HF bands, made with a common speaker wire. In its natural form, the speaker wire acts as parallel feed line coming up to the bottom of the PVC feed point. From there, it's split into two wires, one heading out each side of the PVC tee.
    [ Hits: 395 | Votes: 4 | Rating: 9 ]
Antennas : Fan Dipole
  • 20 thru 10 Meter Fan Dipole - The 20 thru 10 meter dipole is constructed from stranded insulated wire available in most hardware stores. The feedpoint uses an 8 inch long section of 2 inch diameter PVC pipe. A section of wire joins the elements at either side of the feedpoint to avoid the inductance of square knots used on lower frequencies.
    [ Hits: 3182 | Votes: 14 | Rating: 5.96 ]
Antennas : Halo
  • Halo Antenna for 50 MHz - The antenna described in this article is for 50 MHz, but the design can be scaled for any band, including VHF, UHF, or even the higher HF bands. The antenna is nothing more than a square loop of wire, approximately 30" (or ~76cm) per side. The loop is fed in the middle of one side, and the opposite side to the feed point has a gap in it.
    [ Hits: 301 | Votes: 0 | Rating: 0 ]
Antennas : Helical
  • Helical Antennas -Theory - Helical antenna or helix antenna is the antenna in which the conducting wire is wound in helical shape and connected to the ground plate with a feeder line. It is the simplest antenna, which provides circularly polarized waves.
    [ Hits: 137 | Votes: 0 | Rating: 0 ]
Antennas : Sloper
  • 2.6 MHz Halfwave Sloper - The 2.6 Mhz M Dipole is constructed from #10 stranded insulated wire available in most hardware stores. The feedpoint uses a T-section of PVC pipe
    [ Hits: 386 | Votes: 0 | Rating: 0 ]

Not satisfied ? Lookup Google Custom Search Engine for wire feed point


Search wire feed point with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search