yaesu g

The DXZone.com

yaesu g

520 links - and 1 categories

Antennas : Magnetic Loop
  • Mastering Magnetic Loop Antenna Control - Unveil the secrets of efficient Magnetic Loop Antenna control systems, eliminating the hassle of frequent retuning. With real-time tracking and compatibility with various transceivers, including popular models from Elecraft, ICOM, Kenwood, and Yaesu, this controller ensures seamless frequency adjustment. Explore its high-resolution stepper motor and versatile communication capabilities, revolutionizing amateur radio operation.
    [ Hits: 54 | Votes: 0 | Rating: 0 ]
Antennas : Portable
  • Yaesu ATAS-120A Portable Tripod: Enhancing Efficiency - In this post by N6CTA, discover the conversion of the Yaesu ATAS-120A screwdriver antenna for portable use. The author details the creation of two sets of radials, 16 and 32 in 16ft lengths, aiming to optimize the efficiency of ground-mounted antennas. Additionally, insights are shared on attaching male quick disconnect blade tabs, with potential plans for a radial plate kit.
    [ Hits: 80 | Votes: 0 | Rating: 0 ]
Operating Modes : FT8
  • Optimizing TX/RX Levels in WSJT-X - Exploring digital radio modes, the author rethinks how to adjust transmit and receive levels in WSJT-X. Despite effective communication using Yaesu's settings, a new procedure aims for better performance. For RX, set audio device levels to 100%, disable AGC, and adjust RF gain. For TX, enable "Remember power settings" and adjust power output to avoid ALC engagement. This method ensures reliable communication without signal degradation, enhancing dynamic range and minimizing noise.
    [ Hits: 47 | Votes: 0 | Rating: 0 ]
Operating Modes : Mobile
  • A mobile radio installation - Detailing a Yaesu FT-857 and ATAS-120 installation in a 1997 Toyota Tacoma, the author used Polar Plot to map signal strength. Using a hand truck with a laptop, FT-817, and an Iron Horse antenna, they circled a chalk-outlined 100-foot diameter, revealing potential nulls towards the truck's rear and through the cab, offering insights into antenna performance.
    [ Hits: 43 | Votes: 1 | Rating: 3 ]
Radio Equipment : HF Transceivers : Yaesu FT-1000MP
  • Repair of an FT-1000 MP Mark V - Repair of a Yaesu FT-1000 MP Mark V probably struck by lightning.
    [ Hits: 50 | Votes: 1 | Rating: 10 ]
  • FT 1000MP MK V and Keyclicks - YaesuFT1000MK V stands out with improved close-spaced SSB transmit performance, reversing a trend seen in other modern radios. Featuring a class-A mode, it offers clean HV finals when kept out of ALC. However, two significant flaws persist: the noise blanker causes receiver IM distortion, and the transmitter lacks wave-shaping on CW, resulting in pronounced keyclicks. Preliminary tests reveal strong keyclicks +1kHz and -1kHz, prompting a combined modification to address both issues.
    [ Hits: 27 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : Yaesu FT-710
  • Yaesu FT-710 QST Review - Yaesu FT-710 AESS MF/HF and 6-Meter Transceiver review on QST
    [ Hits: 125 | Votes: 1 | Rating: 7 ]
  • Yaesu FT-710 review - The Yaesu FT-710 is Yaesu s compact, shortwave transceiver that uses the SDR technology known from FT-DX101 and FT-DX10, which is a great fit for our fast-paced, comfortable world. The FT-710 is a perfect entry-level device. If you're thinking of buying a compact transceiver with SDR technology, it is a good choice.
    [ Hits: 84 | Votes: 1 | Rating: 8 ]
Radio Equipment : HF Transceivers : Yaesu FT-817
  • Yaesu FT-817 battery pack - Go portable with an external battery pack. The built-in batteries will not last thirty minutes when transmitting, that's not really practical. An external battery pack overcomes these problems.
    [ Hits: 95 | Votes: 0 | Rating: 0 ]
  • Digital Modes with Yaesu FT-817 - Setting up the Yaesu FT-817 and Signalink for data mode communication. Hardware and software required for data mode communication, connect and configure FT-817 and Signalink
    [ Hits: 58 | Votes: 0 | Rating: 0 ]
  • Yaesu FT-817 Audio Enhancement: Heathkit-inspired Homebrew Project - Inspired by Heathkit, author aimed to enhance his Yaesu FT-817 with audio and RF processing. Design goals included a compact enclosure, PCB simplicity, matching jacks, a visual meter, and a built-in signal generator. Despite challenges in finding a suitable compressor IC for a 5V DC mic jack, he chose the Analog Devices SSM2165/2166 series. Prototyping with a solderless breadboard, author planned a PCB layout for its versatile performance in communication use.
    [ Hits: 80 | Votes: 1 | Rating: 2 ]
Radio Equipment : HF Transceivers : Yaesu FT-818
  • Yaesu FT-818 Review - An owner point of view of the Yaesu FT-818 QRP transceiver capable to work HF VHF UHF in CW, AM, LSB, USB, FM, PACKET.
    [ Hits: 34 | Votes: 1 | Rating: 9 ]
Radio Equipment : HF Transceivers : Yaesu FT-857
  • Yaesu FT-857 Repair: Tackling a Sense Wire Issue - After owning the second-hand radio for a few months, it developed a sense wire failure, limiting output to 20 watts. Yaesu support advised the owner, an Electrical Engineer, to investigate. The issue was traced to a blown digital transistor, Q1032. Yaesu provided free replacements, revealing intricate internal components during the repair.
    [ Hits: 40 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : Yaesu FT-950
  • Adding the DVS-6 on Yaesu 950 - Adding the DVS-6 voice memory unit to the Yaesu FT-950. Official instructions are not very clear, and in this article the author document the way the DVS-6 module should be installed into the FT-950
    [ Hits: 15 | Votes: 0 | Rating: 0 ]
Radio Equipment : HF Transceivers : Yaesu FTDX101 Software : Radio Programming
  • Yaesu VR-120 Memory Manager - TK120 is an experimental memory management software for Yaesu VR-120 transceiver
    [ Hits: 41 | Votes: 0 | Rating: 0 ]
Technical Reference : Arduino
  • Band Decoder Arduino - Arduino/ATtiny Based (Ham Radio) ICOM CIV to Yaesu BCD Band Decoder. Build a ICOM CIV to Yaesu BCD Band to automatically band switch the Yaesu Quadra Amplifier.
    [ Hits: 59 | Votes: 0 | Rating: 0 ]
Technical Reference : HF Radios Technical Reference : Ham Radio Go Kits
  • Yaesu FT-891 Go-Box for POTA - This article documents the author's latest go-box build for outdoor ham radio operations using a Yaesu FT-891 transceiver. The go-box is constructed from a plastic "50-cal ammo case" and contains various components, including the transceiver, LDG Z11 Pro autotuner, DIY Yaesu FH-2 remote control keypad, and an external battery. The author details the design considerations, the mounting of components inside the box, and addresses issues related to ventilation and cable management. The go-box is geared for CW operations and POTA activations, with further modifications planned for a microphone and DATA jack. This project allows for rugged, environmentally protected outdoor radio operations while maintaining portability.
    [ Hits: 188 | Votes: 0 | Rating: 0 ]
Technical Reference : Mic wiring
  • Adapting Standard Headset Mic for Yaesu FT-8900 - Explore the process of creating a custom adapter for the Yaesu FT-8900 radio with a non-standard mic port. The article guides users through understanding the reversed pin-out of the RJ-12 connector on the 8900, providing a detailed circuit for adapting the voltage for electret-based mics. With a list of required parts and construction tips, this DIY project ensures seamless compatibility with standard electric headset mics.
    [ Hits: 27 | Votes: 1 | Rating: 1 ]

Not satisfied ? Lookup Google Custom Search Engine for yaesu g


Search yaesu g with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search