memory board

Remote Control Antenna Switch - The Remote Control Antenna Switch consists of two circuit boards. The control unit and the remotely controlled switch

CardboardHorn - Seattle Wireless - A Cardboard Horn antenna for 802.11b

Magnetic loop antenna 10-30 MHz - magnetic loop for 10-30 MHz, using acetal rod former, aluminium foil conductor and copper-clad epoxy board capacitor

ARIDX by UA1AAF - At the moment the most used program is UA1AAF. It is an excellent program written by Boris, UA1AAF, to handle ARI International DX Contest. It can simulate K1EA or N6TR workings; it will be possible to connect the RTX to the computer using a standard interface in such a way as to transmit directly in CW from the keyboard; most of the controls are like K1EA's CT and N6TR's TR ; on line help provides almost all the information necessary for using the program. Is possible to insert QSO after the contest. An appropriate utility in included for conversion in ADIF format. The program is very small and therefore works without any problems on any IBM compatible computer with DOS 3.3 and over or Windows 95/98.

The KO6YD Screwdriver Antenna Memory - The Screwdriver Antenna Memory (SAM) product is designed to enhance the mobile antenna commonly called the "Screw Driver". It replaces your current control unit and provides an automated memory feature that eliminates the visual coil tuning method commonly used.

NETCERTUS ampsequencer - Advanced microprocessor driven control board specifically designed to buffer CW key signals while switching the amplifier to transmission, it can also be used to provide proper TX delay timing for RTTY.

Coastal ChipWorks - Amateur Radio Products From John Hansen, W2FS, Kenwood D700 Keyboard Interface, Expandable TNC with an Optional, remote controls for ICOM radios, frequency keypads for yaesu and icom radios

GAO Engineering - Gao engineering offers a wide range of affordable, popular and reliable rfid products, dsp, arm and other microprocessor evm and development boards, ides, universal programmers, emulators, dsp learning systems, micro-network terminals, test and measurement products for engineers.

Far Circuits - Printed Circuit Boards - FAR Circuits is exclusively a manufacturer of Printed Circuit Boards for electronic projects that are used by the Amateur Radio and electronic hobby enthusias

Sunstone Circuits Priority listing - Sunstone Circuits is your easiest source for quoting and ordering printed circuit boards online. We are three respected brands in one: PCBexpress quickturn boards, PCBpro.com full-featured and design-checked boards, and PCB123 design software.

Yogi Electronics - Yogi Electronics provides DTMF Control Simplex Repeater board.

Mfsk - MFSK is an easy-to-use chat mode for real-time amateur contacts, nets and bulletin transmissions, but not intended for contesting or Bulletin Board System (BBS) use. It is a half-duplex non-Automatic Repeat ReQuest (ARQ) forward-error-correcting (FEC) mode. It performs well on long-path fading conditions and in the presence of interference

Psk31 - PSK31 is a digital communications mode which is intended for live keyboard-to-keyboard conversations, similar to radioteletype. Its data rate is 31.25 bauds (about 50 word-per-minute), and its narrow bandwidth (approximately 60 Hz at -26 dB) reduces its susceptibility to noise.

FT-817, FT-847, FT-857, FT-857D, FT-897 and FT-897D Memory Cloning - The complete status of the FT-817, FT-847, FT-857, FT-857D, FT-897 or FT-897D memories can be read into the computer and saved to disk. Any saved file can be subsequently reloaded into the computer and sent back to the rig. This facility uses these rig's ability to clone configurations from one rig to another using the serial port.

Easy programming the V8000 with the hand microphone - A quick and easy method of programming memory channels The Icom IC-V8000 manual leaves much to be desired due to the translation. The operator's manual included with the Icom IC-V8000 can be very confusing to the new ham and the old timer alike, and lots of hams get very disgusted when trying to program the IC V8000 using the instructions provided with the operator's manual.

All American - Distributor of electronic components, ull range of semiconductors (active components), including relays, circuit breakers, transistors, diodes, memory devices, microprocessors, microcontrollers, and other integrated cuircuits, as well as passive components, such as capacitors, resistors, inductors, and electromechanical products, including cable, switches, connectors, filters, and sockets.

DRF Technologies - Interfacing and Control Projects for the Hobbyist, Ethernet I/O Board, VA3TO Echolink Interface, Programmable Beacon Keyer Project.

The Willco electronics no-fail memory - Memories repair and replacements for Icom Radios

OpenBCM - The BayCom-Mailbox is an amateur radio/citizen band AX.25 Bulletin Board System with AX.25 store and forward capabilities. The software is available for Linux, DOS and Win-NT. OpenBCM is opensource and freeware.

AR8200 Computer Control Software - Ar8200 computer control software jaor is the ultimate in management for the aor 8200 mki, mkii and mkiii radio scanner. the software allows full function control, memory management, configuration and remote access of the radio.

13cm RF Amplifier - This amplifier uses two 60w Spectrian amplifier boards with the usual input and output hybrid coupler and combiner.

UHF dummy Load - A very simple and effective dummy load can be made from several resistors, a connector, and a small metal plate or piece of PC board stock.

Making printed circuits - To make smart looking PCB's, all you need is a computer, a laser printer, copper clad board, etchant, a clothes iron and some Epson glossy photo paper.

OZ4HZ APRS tracker - The 4Hz tracker - APRS tracker with AT89C4051, now also with 5W transmitter onboard.

50MHz-Transverter 10m/6m from DK7ZB - This transverter was built in 1994, a discription in three parts (german language) for DOWNLOAD as PDF-files. Circuit, printed-boards and layouts in the files