v4 sound card tnc

The quarter wave transformer - A transient analysis of an inpedance transforming device, by W9DMK, in pdf format

Contest audio file - MP3 file recording a QSOs with SP5CKA and SN7N (SP7PS) in SP DX Contest 2001 on 40m (recorded by SP7PS)

RTTY and SSTV sounds - SSTV and RTTY sample sound files in wav or mmv format for test pourposes.

Sounds Sweet Communications Speakers - Speakers for Amateur Radio, 2-Way Radio, Shortwave and Scanner listening

W8JI History of 160 Meters - Includes W1BB Stew Perry letters, and a sample QSL cards of dated 1963

Frequency Calibration for Weak Signal Work - Accurate calibration of your receiver and sound card is necessary for good results with the weak signal modes in use at LF. Modern receivers with master oscillators that are synthesized to provide all conversion frequencies greatly simplify the process. This article describes a method of making the necessary measurements and adjustments to an ICOM R75 receiver and a sound card, using the ARGO software

Kenwood ts-2000 and packet/digital mode - Using the TS-2000 for packet and digital modes. How to connect the Kenwodd TS2000 to TNC

Cables Etc. - Electronic Parts for HAM Radio Operator's and Electronic Hobbists. Amateur radio parts and components. Electronic Parts Distributor accept VISA, DisCover, and MasterCard.

QSL Canada - Very high quality QSLs with prices that fit any budget. Large selection of cards style, free design.

QSL Card Trac - A new way to display your QSL cards,you can display your Cards with a wall mounted, easy to use track system.

Acarsd - acarsd is an ACARS decoder for a LINUX or Windows PC which attempts to decode ACARS transmissions in real-time using up to three Soundcards. acarsd is also a realtime ACARS Server, for the worldwide spotter and ACARS community.

APRS-Beacon - The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)

Phase 3D (AO-40) Decoder - This program demodulates the telemetry data signal transmitted by the AO-40 satellite (aka Phase III-D) using the PC sound card

ComTekk Tone Generator - ComTekk Software Tone generator for 2-way radio signaling. Use sound card to generate CTCSS, DTMF, tone remote, ANI and more. Synthesizer for simulation and testing of 2-way radio systems, repeaters, remote control, ANI, Paging and more

SlowHell - A MT Hell dos transmitting program by DF6NM

Morse Maker - MorseMaker is an up-to-date replacement for the Morse Machine shown further down this page. It has been re-written using a different programming language and is now entirely 'stand-alone' requiring no run-time support files. This version also works with Windows XP and can use the soundcard but please note that, unlike its predecessor, it does not split the alphabet into smaller 'learning' blocks and does not incorporate the Morse reader.

MMvari - MMVARI is a multi-Mode SoundCard Ham (Amateur) Radio program for receiving and transmitting the RTTY-PSK-FSK-MFSK modes. The program was written to experiment with the efficiency of transmitting Japanese and East Asian languages (HL/BV/BY) using the VARICODE

Cobracom - Oscilloscope, Realtime spectrum analyzer, Impedance meter, RLC bridge and signal generator for Windows. Is a Windows application that converts your PC into a powerful dual-trace signal analyzer (oscilloscope, FFT etc...) . Uses your PC sound card as an Analog-to-Digital a Converter to digitize any input waveform and as Digital-to-analog Converter for the signal generator. True 24 bit adc/dac 48K/96k/192k sampes/sec.

MUTNC - The multiuser/multitasking BPQ Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC or Baycom modem attached to your IBM-PC/clone in conjunction with the BPQ Node software.

Packet Terminal Interface - Simple Windows based TNC interface program Designed for ARES operation, simple operator interface to connect and perform communication functions, control operator programs screens before operations Both receive and transmit screens Simple Windows based TNC interface program Designed for ARES operation Simple operator interface to connect and perform communication functions Control operator programs screens before operations Both receive and transmit screens

eQSLMaster - eQSLMaster is a HAM radio program, that allow to perform various functions using the Electronic QSL Card Centre (eQSL.cc). With eQSLMaster users of the eQSL.cc system have the ability to upload an entire ADIF format log file (or single QSO) and have it deposited into eQSL central database using LogServices.

DNBTV - This experimental software will send pictures or slow video directly from your webcam through your soundcard. you will need a webcam capable of 160*120 24bit RGB.

SpectraScope - SpectraScope is a simple Windows interface program allowing your computer to view up to two audio waveforms in either the time or frequency domain. The program is a Windows soft panel operating as a dual channel oscilloscope and spectrum analyzer. The useful frequency of operation is 20 to 10,000 Hz in the time domain and 20 to 20,000 Hz in the frequency domain. The program uses the computer sound card to capture the audio input.

DDS VFO Controller - Control the NJQRP DDS Daughtercard from your PC. The DDS Controller has eight user programmable configurations. Each of the eight configurations have twenty memory cells for saving and recalling frequencies

MM-TNC - This package contains a sample code for the MMTTY custom TNC emulation. It is supposed to run on the same PC or on the remote PC, and offers the functions of the TNC emulation.