aluminum elements

Multiband Cubical Quads - EI7BA Multiband Cubical Quads projects, includes two elements quad antennas for 10 12 15 17 20 meters band. Performance considerations, detailed pictures and construction notes.

Aerialacts - MaxiMoxon is aerialacts trade name for its line of compact, monoband, two-element, uni-directional parasitic beam antenna arrays utilizing Yagi-style aluminum elements. MaxiMoxon models are available for the 20, 17, 15, 12 and 10 meter amateur radio bands.

7 Elements YAGI for 144 Mhz  ^{updated  pop} - The QM7 antenna is a simple 7 elements Yagi with 3.7 m boom length for the lower 144 MHz SSB/MGM band, in PDF Format

QM5 Yagi for 2 meters band - The QM5 antenna is a simple 5 elements Yagi with 1.88 m boom length for the lower 144 MHz SSB/MGM band, I used it mainly for Sporadic-E and MS contacts. It exhibits a forward gain of 9.17 dBd; i.e. 11.3 dB forward gain over the isotropic radiator, while the F/R is about 11.5 dB. Elements

QM7 7 elements 144 MHz Yagi-Uda Antenna - The QM7 antenna is a simple 7 elements Yagi with 3.70 m boom length for the lower 144 MHz SSB/MGM band, used it mainly for Sporadic-E and MS contacts. It exhibits a forward gain of 11.35 dBd; i.e. 13.5 dB forward gain over the isotropic radiator, while the F/R is about 12.5 dB

8 Element Quad for 145 Mhz  ^pop - 8 elements quad antenna for 2 meters band, centered on 145 Mhz

M3FVB 2 meter quad - Photos and building procedure for a home brew 2 elements Quad for 144 mhz.

2 Elements HB9CV  ^pop - 2 meters band HB9CV antenna

13 elements Yagi antenna for 144 MHz - DJ9BV yagi antenna for 2 meters band

K9FV 40 meters band loop - A Mississippi Style 40 meter magnetic loop made from available aluminum conduit, this antenna will not disappoint by Ken Holland, K9FV

8-Element 430 MHz Quagi - Picture and notes of a 8 elements Quagi antenna for 432 Mhz b Paul Bock, K4MSG

The Bazooka antenna - The Bazooka-antenna was developed by the staff of M.I.T. for radar use. The original Bazooka used coaxial cable for the entire radiating elements.

The EH Antenna analyzed - This report is a recent analysis of the EH antenna using the Pspice program and considering the antenna as a set of circuit elements

Yagi Element Mounting Considerations - One of the most important considerations when designing and building a Yagi antenna is the method used to attach the elements to a boom. This is true because the boom influences the electrical length of the elements. In this article JH Reisert explain with drawings techniques on mounting yagi antenna elements to a boom

The Moxon Antenna - The Moxon antenna is sort of a two element yagi with the elements folded and spaced to eliminate the need for an impedance match.

2-Element Moxon Rectangle for 10 meters band - 10 meters band aluminum 2-Element Moxon rectangle

Experiments with a Moxon Rectangle antenna - An easy to build moxon antenna for portable use. A Moxon Rectangle is a two element beam, where both elements are folded towards eachother.

The 5 Bands Wire-Beam - This wire-beam has one radiator-element, feeded with 450-Ohm-Wireman-twinlead and needs an antenna-tuner. For the bands 6m, 10m, 12m, 15m, 17m and 20m bended reflector-elements are used. The support is a cross of 4 fibreglass-fishing-rods

A tri-band 2 element portable Yagi - Additional notes and eznec file on original article of a Portable 3-Band Yagi antenna for 10-15-20 meter band made with wire elements, original article published by VE7CA

Quagi Designer - Quagi antenna design, this little windows application let you calculate dimensions of elements and spacing of a quagi antenna. Freeware by VE3SQB

F5KEE Quagi 8 elements - An 8 element quagi antenna for 2 meters band, with pictures and diagrams, in french

A homebrew 10-element 900 MHz quagi - A 10 elements quagi antenna for 900 mhz

Automatic Lightning Protection. - Lightning Rods - Protect your family, home, and property. Top quality copper and aluminum equipment.

Smith Chart Software - SimSmith is a highly interactive, real time Smith chart graphing program. Circuits are constructed using drag-n-drop. Load files can be imported from the EZNEC and CocoaNEC antenna simulation software and from the AIM4170 and miniVNApro antenna analyzers. Circuits and load files can be of any size. Key Features: SimSmith is one of the few Smith chart packages which models transmission line losses. SimSmith also allows the description of circuit elements using algebraic equations. SimSmith has only one screen and allows the screen to be resized to increase workspace or readability.

SatEvo - SatEvo is a program to compute the decay or re-entry times of earth satellites. For objects nearing decay, it generates sets of orbital elements for each revolution. The format of the input and output element sets conform to the standard tle format accepted by many prediction programs.