2m vertical

10 Meter Wire Jpole - A vertical en-fed zepp for 28.4 Mhz by N1LO

80/160 Dual band vertical - This 80/160 meter antenna is constructed from six 12 foot aluminum tubes to form a slip-up mast antenna some 60 feet high by K0RWU

Vertical antenna for 20-15-10 m  ^pop - This is a vertical multiband antenna made up of several aerial elements lambda/4 length, feeded with just a coaxial cable in French.

Build a hanging dipole for two metres - Described here is a simple omnidirectional, vertically-polarised dipole for two metres

EZ-Lindenblad Antenna for 2 Meters - This easy to build antenna works well for satellite or terrestrial communication, horizontal or vertically polarized by Anthony Monteiro, AA2TX QST Article

The Little Stick Antenna  ^pop - The Little Stick antenna is an aluminium version of the Vertical Bazooka design which was made from coax.

JA7KPI Windom antenna for 40-80 - The total length of this antenna is 41m, height is about 11m, and diameter of element is 2mm. JA7KPI modified this antenna originally used as Inverted-V type of 80m band Dipole. Works on 40 - 80 meters band with acceptable swr.

2 Elements revesible verticals antennas - 2 element reversible verticals, small footprint, big results.

A comparison of commercial 4m verticals - Ian Hogan G6TGO has recently tried out two different commercially-built vertical aerials for 4m, and has prepared this article to share his findings with us.

The Simple Collinear - Wherever there is a need for a vertically polarized omni-directional antenna with gain, a collinear is used. The vertically polarized collinear takes the form of two or more half waves in-line and in-phase, resulting in an omni-directional pattern with maximum radiation near the horizon.

Omni-Gain Vertical Collinear Antenna - This rugged antenna, an omnidirectional collinear, is capable of surviving harsh environments. It's a good choice for repeater installations and can be top, or side mounted to the tower by WA6SVT

802.11 2.4Ghz Low-Power Vertical Antenna - A 2.4Ghz low-power 5dBi vertical collinear antenna for 802.11 applications

Home-brew Compact 6dBi Collinear Antenna  ^pop - This page details the construction of an easy-to-make collinear 360 degrees omni-directional, vertically polarised, antenna for 802.11b/g wireless networking.

Feeding an End-Fed Antenna  ^pop - End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.

40m broadband vertical antenna - A loopy loop loaded vertical antenna operating range 7.0 to 7.3 MHz by S. C. Chuck Smith, WA7RAI

N3OX Multiband vertical - This vertical antenna consist of a 18 meters telescopic pole and allow operations from 160 to 30 meters band, project by Daniel Zimmerman N3OX

Homebrew Buddistick 2007 - W3FF article about the buddistick portable vertical antenna in a PDF file

HB9MTN C-Pole Porable antenna - A vertical monoband that's small, light and portable, needs no counterpoise and performs as well as a home antenna

Backyard 7 Mhz Vertical - A vertical antenna for 40 meters band by PA5MW

A Simple But Effective Low-Band Base Antenna - A vertical antenna for Six Meters band

KG4WBH Beacon - 28.222mhz transmitting with 2 watts of power

European Repeaters listing - Listing of repeaters based in europe by PD2MEY

RW3AZ VHF amplifiers page - 2m/70cm GS31B Power amplifier pictures

OZ2M - Beacon Keyer - Features, pictures and schematic to home made your keyer

Build a 2 meter duplexer - The duplexer is conservatively rated at 150 watts input, but it should withstand up to 300 watts.