3 elements yagi

3 elements yagi

Pages: [prev] 1 2 3 4 [next]

• 5 element Yagi antenna for 10 meters band - This 10 meter antenna is right out of the ARRL Antenna Book. There are 5 elements on a 24 feet boom and it performs well from 28.0 to 28.9 MHz.
  [ Hits: 194 | Votes: 2 | Rating: 6 ]

• Yagi Antenna for 23cm ATV reception - A home made 23 elements yagi antenna for the 23cm band made on alluminium boom with floating element mounted on a plastic isolators. Includes a table with elements distances and lenght
  [ Hits: 333 | Votes: 0 | Rating: 0 ]
• 43 Elements Yagi Antenna for 23cm band - An interesting presetnation full of usefull tricks to correctly design and build 23 cm Yagi using simple tools. The basic design of the antenna presented in this document is taken from the original DL6WU Yagi Design published in 1982
  [ Hits: 433 | Votes: 1 | Rating: 8 ]
• 35 Element Yagi Antenna for 23cm - Antennas for the 1296 MHz based on the construction plans of some Yagis 35 elements by DL6WU, F9FT, DJ9YW. These antennas features a boom of about 3 m and gives a gain of about 17.8 dBd
  [ Hits: 210 | Votes: 1 | Rating: 7 ]

• Lightweight 4 Element Yagi for 2 meters - A 4 elements Yagi-Uda antenna for 144.3 MHz plan with dimensions and yagimax dimension calculation
  [ Hits: 813 | Votes: 3 | Rating: 6.67 ]
• Lightweight 144 MHz Yagi antenna - A Lightweight 2m Yagi for SOTA. The boom is 20mm PVC electrical conduit and the elements are 2.4mm aluminium TIG welding rod. The antenna is carried as a single length of conduit with the elements stowed inside the boom, sealing them in with a bung. The driven element is connected directly to 50 Ohm coax with a BN-43-202 balun core to decouple the coax shield.
  [ Hits: 178 | Votes: 0 | Rating: 0 ]

• Homebrewing a 6 Meter Yagi - In this PDF article Zack Lau describe how to homebrew a four element yagi beam antenna for 50 MHz band, including how to build mounting blocks and tubing clamps to hold elements.
  [ Hits: 965 | Votes: 2 | Rating: 5.5 ]
• 2 elements Folded Yagi Antenna for 6 Meters - 50MHz Collapsible 2 Element Mini Beam antenna, an overview the development of the 6MBA.
  [ Hits: 740 | Votes: 1 | Rating: 10 ]
• 3 Element Beam for 50 MHz - A six meter band 3 element yagi beam antenna project with shortened elements using coax cables with the outer ends stripped and the center conductor shorted in somewhat of a Bazooka antenna.
  [ Hits: 424 | Votes: 1 | Rating: 8 ]
• 6 Elements Yagi Antenna on 50 MHz - This is a design based on the QuickYagi 4 software by WA7RAI with some changes for practical reasons. The beam uses 6.5 metres of standard 25mm square boom, 12mm diameter elements without tapers. The actual boom length used is 6.3 metres and all parts are readily available.
  [ Hits: 134 | Votes: 2 | Rating: 6 ]
• 3 Elements Yagi LFA for 50 MHz - A short 3 element LFA Yagi for 50MHz with a 1.94M boom. This antenna has been designed in order to minimise the upward and downward lobes typically seen the the EL plane on Yagi antennas.
  [ Hits: 226 | Votes: 2 | Rating: 8 ]
• Homebrewing a 6 Meter Yagi - Six meters is a great band for home built Yagis. The elements are reasonably small, but not so small that building tolerances are critical. With careful construction and detailed instructions, it is certainly feasible to build no-tune Yagis up to 432 MHz.
  [ Hits: 471 | Votes: 0 | Rating: 0 ]

• 432 MHz 5 elements Yagi - 5 Element Yagi with Conventional Driver, this little Yagi has a high F/B, which makes it quite useful as a contest stack.
  [ Hits: 729 | Votes: 2 | Rating: 10 ]
• EF7018 - UHF 18 Elements Yagi Antenna Plan - A 70 cm yagi antenna design by YU7EF includes tables with antenna elements dimension and spacing. This UHF Yagi antenna plan provides a maximum gain of 17.93 db
  [ Hits: 321 | Votes: 0 | Rating: 0 ]
• Cross-Yagi 10el Antenna for 70cm - 10 Elements Cross-Yagi Antenna for 433 MHz. The base of the 10el antenna is the recalculated RA6FOO antenna.Circular polarization is realized - by a phasing quarter-wave line, matching of horizontal and vertical polarization antennas
  [ Hits: 176 | Votes: 6 | Rating: 8.83 ]

• Foldable Yagi Antenna - A home made RDF 3 elements Yagi that can be used for fox hunting. The particularity of this antenna is that it can be folded, in order to save space while travelling. In Dutch.
  [ Hits: 236 | Votes: 1 | Rating: 10 ]

• 5 Element 2M / 70cm Yagi - On this page is the design for Dual Band 2M / 70cm antenna with 3.2mm elements. The antenna has a 50 ohm designed driver. This Yagi has a unique element called a Open Sleeve
  [ Hits: 1692 | Votes: 10 | Rating: 5.5 ]

• 3 Element Yagi Antennas for 144 MHz SSB-CW - A great and efficient monoband VHF portable antenna. The article consist of two version of a 12.5 Ohm 3 elements yagi beam antenna plans for the two meter band, a full sized and a shortened version expecially designed for the SSB and CW on 144 MHz.
  [ Hits: 427 | Votes: 4 | Rating: 8 ]
• Two elements Triband Yagi Antenna - This project was originally developed by Markus VE7CA A Portable 2-Element Triband Yagi - PDF Article
  [ Hits: 218 | Votes: 1 | Rating: 7 ]
• 13 Elements Yagi for 144 MHz - A homebrew 13 elements yagi antenna for two meters band. These project includes two model of the same antenna with a 6 and 7 meter boom length. Detailed pictures and nec files are available for download
  [ Hits: 142 | Votes: 0 | Rating: 0 ]

Pages: [prev] 1 2 3 4 [next]