6 to 1 balun

16 links about 6 to 1 balun on dxzone.com

Site listings

Antennas : Baluns

WB6ZQZ 3 in 1 Balun - Builing a triple ration balun, that match resonant antennas from 9 ohms to 75 ohms with 1.5:1 or less SWR
[Hits: 3386 | Votes: 2 | Rate: 10.00]
Building baluns ^pop - How to easily home-brew baluns even in strange formats 1/1 - 2/1 - 4/1 - 6/1 - 9/1 - 12/1 et 16/1 for bands from 1.8 to 30 (50) MHz in french
[Hits: 22307 | Votes: 13 | Rate: 7.00]
OH7SV Windom baluns - Windom baluns for kilowatt range made with two ferrite toroidal cores amidon ft-140-61 and another schema with two ferrite rods
[Hits: 2350 | Votes: 4 | Rate: 8.50]
WB6ZQZ Triple Ratio Balun - This balun matches resonant antennas from 9 to 75 ohms without a tuner and provides RF isolation to keep the current off the transceiver case
[Hits: 1481 | Votes: 2 | Rate: 5.00]
The Ugly Balun - A 1:1 choke balun for 160 thru 10 meters using one continuos lenght of coax to rig.
[Hits: 4444 | Votes: 5 | Rate: 6.60]
Baluns by Dan N5AR - There is considerable confusion about the various types of baluns, this article try to make it clear.
[Hits: 1688 | Votes: 0 | Rate: 0.00]
1:6 Balun for HF - PD2HFE project of a 1:6 Balun for HF Bands using a T-200 toroid core
[Hits: 4282 | Votes: 6 | Rate: 4.83]
Coiled Choke Balun for HF - A very practical Balun for HF aerial work is the choke type. It reduces RFI to and from the feeder & at next to no cost or loss.
[Hits: 1235 | Votes: 0 | Rate: 0.00]
1:6 Balun for the HF bands - 11 wdg bifilar on Amidon T 200-2 Toroid core
[Hits: 1211 | Votes: 1 | Rate: 1.00]

Antennas : Baluns : 1 to 1 Balun

Simple HF Baluns for 50/75 ohm coax - Show diagrams, winding methods and tables of some 1:1 and 4:1 baluns for 1.8 - 30 MHz suitable for use up to 200W (400W peak) on systems using 50 or 75 ohm coaxial cable input where SWR should not exceed 1.6:1.
[Hits: 6656 | Votes: 4 | Rate: 6.25]

Antennas : Baluns : 4 to 1 balun

How To Make A Homebrew 4:1 Balun ^pop - I built a homebrew 75 meter Double Extended Zepp Antenna, And I needed a 4:1 Balun So I decided to Homebrew the Balun also. Here is how I did it!
[Hits: 73678 | Votes: 92 | Rate: 6.21]
W1CG Low Power Balun Kit - Contruction manual to build a 4:1 balun, it has good performance from 160 through 10 meters.
[Hits: 3078 | Votes: 3 | Rate: 9.00]
ZS6KMD Nescafe 4:1 Balun - Making a 4:1 balun with a nescafe coffee jar lid and a toroid
[Hits: 3171 | Votes: 2 | Rate: 4.00]
4:1 balun for 160 to 10 meters ^pop - Articke By Clay Wynn
[Hits: 22112 | Votes: 6 | Rate: 5.83]
1:4 Current Balun - This project is intended to aid in tuning a balanced antenna or feedline that has a high impedance 100-600 ohms by N5ESE
[Hits: 603 | Votes: 0 | Rate: 0.00]

Radio Equipment : HF Transceivers : Elecraft K2

Elecraft K2 Internal 4:1 balun - Adding an internal 4 to 1 balun to the K2
[Hits: 53 | Votes: 0 | Rate: 0.00]

Not satisfied ? Lookup Google Custom Search Engine for 6 to 1 balun

Find products related to 6 to 1 balun
Search 6 to 1 balun with: Google groups , Yahoo!, Altavista, Teoma, Lycos, HotBot, Amazon

6 to 1 balun

16 links about 6 to 1 balun on dxzone.com

Share this page

Similar Search

Share Bookmark

DXZone Newsletter

Google CSE