add on meter
28 links
Pages: 1 2 [next]
Antennas : 17M- TA-33m modification
- Adding 17 meter band to Mosley TA-33M yagi antenna
[ Hits: 634 | Votes: 0 | Rating: 0 ]
- 2 meter HT Handipole
- Add some gain over your rubber dummy load with this full size dipole on your HT.
[ Hits: 3184 | Votes: 1 | Rating: 1 ]
- 40m/80m Portable antenna
pop
- Portable wire antenna for 40 and 80 meter made with a RF Chocke. Can be adapted to work on 160 meters by adding additional 6.9 meters wire at its end.
[ Hits: 61533 | Votes: 29 | Rating: 5.96 ]
- 300 ohm twinlead 40 meter dipole
- The N2CKH travel special 300 Ohm ladder line convertable antenna
[ Hits: 8576 | Votes: 3 | Rating: 5.67 ]
- Buddipole vertical dipole for 40M
- A vertical dipole for the 40 meters band made by using some buddipole parts and adding capacities on both ends by HB9MTN
[ Hits: 1923 | Votes: 3 | Rating: 5.67 ]
- Multiband fan dipole antenna
- A three-frequency multi-band dipole that can be extended easily to additional bands. This article includes a multiband fan-dipole antenna for 80-40-20-10 meter band.
[ Hits: 2447 | Votes: 6 | Rating: 9.17 ]
- 6 Bands Fan Dipole Antenna
- Extension to an existing fan dipole originally modeled for 40 20 and 6 meters. This modification will add 80 15 and 10 meter bands.
[ Hits: 1293 | Votes: 2 | Rating: 5 ]
- 2 Meter J-pole from 450-Ohm Ladder Line
pop
- Great first time J-pole project. Covers most of the basics. This small and thin design also makes it good for several stealth applications.
[ Hits: 43377 | Votes: 49 | Rating: 7.04 ]
- 160 meter full wave loop antenna
pop
- The antenna is a 10 - 160 meter horizontal loop fed with 450 ohm ladder line all the way into the ham shack to an Palstar AT1500BAL balanced line antenna tuner
[ Hits: 97818 | Votes: 122 | Rating: 6.48 ]
- The Thick Loop
- The performance of a small magnetic loop can be improved constructing it larger, thicker or both.
The antenna is covering from 12 Megahertz to 32 megahertz and adding a 156 Pico farads ceramic capacitor it resonates on the 40 meters band.
by PY1AHD
[ Hits: 1040 | Votes: 0 | Rating: 0 ]
- W4JOH Cobra Antenna
- The original Cobra antenna, is a multiband 160 or 80 to 10 meter, designed by W4JOH is built using standard insulated wire of about 14 gauge and fed with 450 ohm ladder line down to the shack into a tuner.
[ Hits: 1709 | Votes: 1 | Rating: 10 ]
- Balcony Mounted Buddistick Antenna by KP4MD
- The antenna handles 250 watts and covers 40 through 10 meters, with an optional add on coil for 80 and 60 meters. The author in this pages includes an interesting video in which describes the antenna setup, and the importance of the shunting coil on lower bands like 40 and 80 meters. SWR curves diagrams are also included and demonstrate the influence on resonating frequency of the shunting coil.
[ Hits: 279 | Votes: 3 | Rating: 10 ]
- HF2V 80 40m Vertical
- Article on the HF dual band antenna with construction details and how to add 160 meters to the HF2V
[ Hits: 3016 | Votes: 10 | Rating: 7.2 ]
- 17 Meters on a Hustler 5BTV
- Convert a Hustler 5 band 5BTV to 17 Meters
An easy add on antenna project
by Larry, KK5ID
[ Hits: 1222 | Votes: 1 | Rating: 1 ]
- Cushcraft A3S - A743
- About the Cushcraft A3S with A743 add-on for 30 an 40 meters
[ Hits: 687 | Votes: 1 | Rating: 8 ]
- Meter Mate - SWR Graph Software
- Meter Mate is a companion utility for your directional watt meter that allows you to calculate the SWR reading when the forward and reflected power readings are measured. In addition to calculating the antenna system SWR Meter Mate will also plot the SWR curves of all of your antennas onto graphs that may be printed out.
[ Hits: 1914 | Votes: 12 | Rating: 4.91 ]
- NFM - noise figure measurement
- NFM (for Noise Figure Meter) is a software application to assist Noise Figure measurement. NFM implements the method of Agilent application notes AN 57-1 and AN 57-2 for noise figure measurement, but with the addition of an adjustable attenuator after the noise source and between the DUT and instrument.
[ Hits: 404 | Votes: 4 | Rating: 7.75 ]
- Coil32
- Coil32 is a free coil inductance calculator, that allows to calculate: single layer and multi layer air core coils, toroidal air core coils, inductors on ferrite rings, in pot core, flat coils on the PCB, and also LC resonance parameters. The program have additional plugins to calculate another kinds of coils.
The application is free for usage and distributing.
[ Hits: 1571 | Votes: 6 | Rating: 7 ]
- 59+ CW
- Freeware Win32 application can be used for sending CW signal to the transceiver over a COM port or simply listening to Morse code on the speaker. The application is very easy to configure and will allow you to you to add new Morse characters set speed, tone, dash, dot, PTT line delay and other parameters. It is also possible to set shortcuts for call, QTH, name, RST and ANY other QSO field.
[ Hits: 25073 | Votes: 35 | Rating: 5.79 ]
- Converting an HT-41 Hallicrafters Amplifier
- An amplifier made using an old HT-41 Hallicrafters Amplifier and adding the 160 meters band By W4NFR
[ Hits: 697 | Votes: 2 | Rating: 8 ]
Pages: 1 2 [next]
Not satisfied ? Lookup Google Custom Search Engine for add on meter
Search add on meter with: Yahoo!, DuckDuckGo
, Bing
Search
Related Searches
You can try similar terms
10 meter 6 meter antenna 160 meter to 6 meter antenna 6 meter 10 meter antenna 10 meter amp 10 meter dx 10 meter fm 10 meter hf 10 meter mod al 811 10 meter net 10-meter- -wonder-bar/.git 10/11 meter 11 meter 11 meter amp 11 meter cb 11 meter in my
Get our links, Everywhere!
Follow us on Social Networks
|
RSS Feeds |
Sign up for daily Newsletter
Service provided by Google FeedBurner
Free for your Site
Add our gadgets to your site
Daily Top 10 links