VK2ABQ Wire Beams
- The VK2ABQ wire beam is described in Les Moxon's HF Antennas for all Locations which also contains the original references, but they are rather difficult to find. The VK2ABQ antenna is a planar wire beam that can be constructed from a single hub and four spreaders.
Crossed-Wire HF Antenna
- This Crossed-Wire Electrically-Steerable HF Antenna, capable of transmitting signals over the entire 1.8 to 30MHz HF range, and capable of receiving signals at much lower frequencies is basically a crossed centre-fed wire system, consisting of four thin wires brought to a central mast by G3YNH
160/80m Coaxial Receiving Loop Antennaspop
- Receiving loop antenna for top band. This antenna allow to reduce noise on both bands. The stand alone 80m loop is approximately four feet in diameter. And made of light weight material. Which makes it ideal for portable use or you can mount it above a pre-existing vhf antenna, and due to it's small size it is quite rotatable.
CW Command Post
- Replace four separate accessories keyer, keyermemory, audio filter, and audio amplifier-- with one box containing allfour and providing for multiple inputs and outputs. N1FN CW CommandPost
A not very original CW operating accessory "put together" by N1FN
- The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)
WSJT High Speed Meteorscatter
- "Software uses four-tone frequency-shift keying for meteor scatter. WSJT stands for ""Weak Signal communications, by K1JT"", and plans call for the program to include more than one communication mode."
DSP-10 2-meter DSP transceiver
- The DSP-10 is an amateur-radio, software-defined 2-meter transceiver that can be built at home. It operates not only on SSB, FM and CW, but also on four Weak-Signal modes. Features are tailored to operation on VHF, UHF and Microwave frequencies. By W7PUA