software for rf signal p

software for rf signal p

Antennas : Beverage

• The Reversible BOGs - The author struggled with receiving antennas on his property. After a standard Beverage on Ground (BOG) antenna failed, he built a Reverse Beverage on Ground (RBOG) using telephone cable. He details construction and testing, finding the RBOG outperformed other antennas in noise level, signal strength, and reception pattern. Software modeling helped optimize the antenna length. Unfortunately, the project ended when telephone cable from the second RBOG was stolen.
  [ Hits: 22 | Votes: 0 | Rating: 0 ]

• SoftRock-40 - The SoftRock-40 is a small, low-cost, good-performing "software defined radio" receiver that plugs into a computer USB port and delivers I-Q audio signals to the computer's sound card. It was designed by Tony Parks, KB9YIG and Bill Tracey, KD5TFD as an "SDR sampler project" for hams everywhere to easily try out software defined radio.
  [ Hits: 8541 | Votes: 9 | Rating: 7 ]

• PI-RX - PI-RX is a beacon monitoring program capable of decoding PI4 and showing the performance of the decoded signal
  [ Hits: 142 | Votes: 1 | Rating: 9 ]

• Linrad - Multiplatoform freeware DSP software. Linrad has its origin in software that was developed for 144 MHz EME CW but it is quite general and should be seen more like a kit for designing a receiver that a receiver for some particular usage. It can be used as a CW receiver with a small time delay and a fast waterfall graph. A dsp for conventional receiver to imporve signals readability, a spectrum analyzer.
  [ Hits: 9983 | Votes: 18 | Rating: 7.46 ]

• JMSK - JMSK is a software modem that implements a good coherent MSK demodulator that has performance comparable to BPSK. Signals are demodulated from the soundcard. Modulated signals can be routed through the soundcard or to an external device such as a DDS module for direct RF modulation. The advantage of MSK compared to PSK is that non linear amplifiers can be used and has a faster roll off. It is an open source cross-platform program written in C++ Qt.
  [ Hits: 372 | Votes: 2 | Rating: 5.5 ]

• Skywave Linux - Linux for shortwave and amateur radio monitoring. Supports popular SDR hardware and online streaming from KiwiSDR, WebSDR, and Spyserver sites. Articles about using Linux with your SDR devices.Skywave Linux, an innovative operating system, leverages cutting-edge technology for seamless access to radio signals globally. Ideal for regions with limited internet access, it effortlessly connects to a network of SDR servers, offering high-performance SDR operation without the need for extensive hardware. With pre-installed and configured SDR software, Skywave Linux simplifies signal discovery and operation for all users.
  [ Hits: 286 | Votes: 0 | Rating: 0 ]

• SDRPlusPlus - SDR++ is a cross-platform and open source SDR software with the aim of being bloat free and simple to use. Multi VFO, Wide hardware support (both through SoapySDR and dedicated modules), SIMD accelerated DSP Cross-platform (Windows, Linux, OSX and BSD), Full waterfall update when possible. Makes browsing signals easier and more pleasant, Modular design (easily write your own plugins)
  [ Hits: 212 | Votes: 0 | Rating: 0 ]

• MDS Spectrum Analyzer - Software for radiomonitoring, radio spectrum analysis. MDS is designed for the real time radio spectrum analysis. It performs real time activity analysis, signal search and collects spectrum data for post time analysis.
  [ Hits: 3354 | Votes: 8 | Rating: 6.88 ]

• WOLF GUI - GUI for the KK7KA Wolf software, that was originally written as command line interface only. Wolf is a weak signal software
  [ Hits: 603 | Votes: 0 | Rating: 0 ]