This week, we’re looking at a few practical builds and some useful tools for the shack. There’s a good write-up on constructing a 70cm collinear, something that often comes up for local repeaters or even satellite work, offering a decent gain figure from common materials. For those interested in portable HF, we have a couple of magnetic loop designs; one covers 40m-17m, emphasizing portability, while another focuses on broadband reception, which can be quite handy for monitoring. We also found a CW contest simulator, Web Morse Runner, which lets you dial in bandwidth and speed, a good way to keep those skills sharp without needing to be on the air. Finally, a new supplier, Chatt Radio, has popped up, worth a look for parts and gear.

This week, we've gathered a few interesting pieces, starting with a look at remote tuner control for some Icom rigs—something that comes up often when you're trying to optimize a less-than-ideal antenna setup from the shack. We also found a neat project for low-band receiving, specifically a phase-controlled array, which could be a real asset for digging out weak signals or tackling local noise issues. For those who appreciate the classics, there's a collection of 'boatanchor' photos worth browsing. We also have a review of the Icom IC-R9000 receiver, a capable unit for general listening. If you're into remote listening, there's a KiwiSDR located in Iraq that offers a unique perspective on HF propagation. Finally, a detailed homebrew QRP transmitter build rounds out the selection, focusing on practical construction details that many experimenters will find useful.

This week, we're looking at some interesting developments for those pushing the boundaries of weak signal work, particularly on the digital modes. There's also a practical guide for constructing a compact magnetic loop, something many portable operators or those with limited space often consider. We'll also touch on a couple of resources that visualize propagation in near real-time, which can be invaluable for understanding current band conditions, whether you're chasing DX or planning a SOTA activation. Finally, a tool for monitoring HF beacons offers another perspective on propagation, especially useful for those interested in long-haul paths below 14 MHz. It’s a mix of build projects and software utilities that can genuinely enhance your operating experience.

This week, we’ve gathered a few items that touch on station utility and antenna construction. There’s a look at a modern take on the station clock, something many of us rely on for DX work, along with a couple of resources for real-time propagation analysis—useful whether you’re chasing DX or just trying to understand band conditions better. We also found a practical build for a 30-meter delta loop, addressing some of the common challenges with that antenna type. For those still sending paper QSLs, there’s a handy utility to streamline label generation. Finally, a remote audio solution that might be of interest for those running a station from afar or experimenting with distributed operating setups. It’s a mixed bag, but each piece offers something to consider for improving your operating experience.

This week, we’ve pulled together a few items that touch on practical aspects of operating, from decoding signals to optimizing antenna setups. There’s a look at a Windows program for Morse code analysis, something that comes up often for those refining their CW skills or just needing a quick decode. We also found a web-based tool for visualizing worked grid squares, which can be quite useful for tracking progress, especially for VHF/UHF operators or those chasing awards. For HF enthusiasts, particularly those considering vertical antennas, there’s a detailed comparison between two popular models, offering real-world insights into assembly and performance. Portable ops get a nod with a field report on a POTA activation, detailing antenna deployment strategies. EME operators will find a resource on 432 MHz procedures, and finally, a remote control solution for the Icom IC-9700, focusing on satellite work, rounds out the selection.

This week, we've pulled together a few items that touch on both the experimental and the practical sides of our hobby. There's a look at an interesting open-source SDR project, the LinHT An Experimental Linux-Based Software-Defined Handheld Radio, which pushes the boundaries of what a handheld can do, especially for those keen on digital voice and custom platforms. We also found a clever QRP tuner design, the Pi-Tee QRP antenna tuner, that offers a lot of versatility in a small package, something always useful for portable operations or even a compact home station. For those working the higher bands, a detailed guide on building a 70 cm repeater antenna is included, which could be a good weekend project. And for anyone still finding their footing with digital voice modes, EvoHam - Simplifying Digital Voice for Every Ham provides a solid resource. Finally, a handy ADIF log analyzer, Amateur Radio Logbook Adif File Analyzer, is worth a look for anyone wanting to visualize their operating patterns.

This week's selection brings together a mix of resources that cater to both the technically curious and the practically minded amateur radio operator. From the intricacies of magnetic loop antennas to the versatility of wire beams, there's something here for those who enjoy tinkering with their setups. Mobile operators will find the DIY HF antenna guide particularly useful, especially when space is at a premium. Meanwhile, the portable EFHW antenna offers a solution for those who love operating in the field. For those interested in the broader trends and insights within the amateur radio community, the latest issue of SWR Magazine provides a wealth of information. Finally, for operators looking to expand their communication networks, the AllStarLink guide offers practical steps to enhance connectivity. Each resource is chosen for its real-world applicability, ensuring that you can put theory into practice in your own operating context.

This week, we've gathered a few interesting items that touch on practical antenna solutions and some less common operating modes. There's a look at a simple, effective 2-meter vertical, something that often comes up for portable or even fixed station use when space is tight. We also have a piece on a low-band loop, which can be a real performer for those chasing DX on the lower HF bands, especially if noise is an issue. For the experimenters, there's a guide to setting up a radioless AllStarLink node, which offers a different way to connect. We've also included an introduction to EME for those contemplating moonbounce with a more modest setup, and a handy utility for RF circuit design calculations. Finally, a compact 80-meter dipole design for those with limited real estate.