A quarter wave vertical end-fed antenna for the 40 meters band. As all vertical antennas, also this aerial requires a good earthing system. In this project the ground is composed by twelve 4, wires buried in the lawn by using a spade to create a slit to drop the wire into.
A dual band antenna designed to work on low bands and in this article on 80 and 160 meters band. Total lenght of this folded dipole is 37,60 meters. Includes some details for fine tuning on 160 meters. Article in italia
A multiband no traps antenna that can work on 40 and 80 meters band. Total lenght of this wire antenna is 20 meters, that make this antenna suitable for restricted lots or backyards. Article in Italian with some interesting pictures taken.
A frame antenna for the 80 meters band, built to be folded and to be easy to be mounted and dismounted. This antenna is suitable for indoor and QRP use, bandwidth is just 10kHz and should be observed a proper distance while transmitting due to high voltage.
North american QRP CW Club, open to any licensed radio amateur or shortwave listener (SWL) worldwide with at least some interest in CW/QRP operation. Encouraging the use of CW and helping all hams increase CW speed and proficiency
Micro24 Cigarette Pack SSB QRP Transceiver for 20m , Moxon Antenna for 7 MHz, 9 Circle RX antenna, A Moxon Antenna for Satellites, Top Band Receive Loop Antenna, A Cheap Portable Mast Support, NanoVNA, Homebrew a High Performance SSB RTX for 14 MHz, NanoVNA Saver , The Micro20 III Pocket Size SSB RTX for 20m