Search results

Build Your Own Bazooka Dipole: A VHF/UHF vertical dipole made from coax

From WH2T Dr Ace's Double Bazooka Coaxial Dipole

This is a deviation from the wonderful antenna the Double Bazooka. The Vertical Bazooka, is made entirely from RG-8U coaxial cable.

Build a double bazooka coaxial dipole, broad-band dipole antenna

The Little Stick antenna is an aluminium version of the Vertical Bazooka design which was made from coax.

An efficient program to calculate dimensions of coax dipoles, or bazooka antennas considering velocity length of different coax cables. Express dimensions in feet/inch and meters/cm. Freeware by VE3SQB

Article by Ed WE6W on a double bazooka antenna

A double bazooka antenna plan for the cw portion of the 40 meter band

A bazooka antenna project for the 7 Mhz, includes dimension for to homebrew your own bazooka for HF bands

The Double Bazooka Dipole is a very efficient single band antenna which is very quite, and does not require the use of a balun. This antenna consists of coax (RG58) or other 50 ohm type with the shield split at the center and the feedline attached to the open ends

Drawings and short descriptio in spanish for dipoles and bazooka antenna.

Article and comparison between bazooka antennas and dipole, taking care of effieciency and bandwidth

Broadband dipole antenna, needs an antenna tuner but can reach 3db gain over dipole

The Broadband Double-Bazooka Antenna- How Broad Is It? Adapted from Technical Correspondence, QST, September 1976, the increasing interest in using the coaxial dipole via W2DU

Article on building a folded bazooka antenna

The page provides detailed instructions on how to build a double bazooka antenna for the 40 meters band. It includes information on materials needed, measurements, and assembly steps. The antenna can be configured as an extended dipole or an inverted V, offering low noise, wide bandwidth, and a 1:1 standing wave ratio. The content also offers calculations for other bands and includes photos of the antenna fabrication process.

Notes on bazooka antennas by Katunk: a portable field antenna, sometimes called the double bazooka or a coaxial antenna.

The Bazooka-antenna was developed by the staff of M.I.T. for radar use. The original Bazooka used coaxial cable for the entire radiating elements.

Home made bazooka antenna for 2 meters band

ON4MG bazooka antenna plan in french

2 metre and 70 cm Coaxial Dipoles, Double Bazooka type

The Double Bazooka Dipole is a half wave dipole with an attempt at compensation of the reactance change that occurs around resonance for a half wave dipole.

Discussion on Elmers Forum at eHam.net about setting up a bazooka antenna in an attic

Double bazooka antennas

The 75 meter double bazooka antenna for 80 meters band by K9HSS

Posts about bazooka antennas at towertalk mailing list

A double bazooka antenna for 80 meters band

A page dedicated to the doble bazooka antenna with dimensions for all HF bands

A monoband antenna with large bandwidth in French

A Bulgarian bazooka antenna project by LZ2ZK

Double Bazooka Antenna, a simple coax based and broad band antenna you can easily build

A bazooka antenna design in German with dimensions for 20m and 40m band with RG174 coax cable stronger than the common RG58

A page in french dedicated to the double bazooka antenna, with a short history of this antenna model and main characteristics including a comparison versus the dipole antenna and formulas to determine elements size.

Here is a review of the 40 and 80 meter band Double Bazooka antennas as used on the HF shortwave bands.

The Double Bazooka Dipole is a very efficient single band antenna which is very quite,and does not require the use of a balun. This antenna consists of coax (RG58) with the shield split at the center and the feedline attached to the open ends.

The HF horizontal loop has been around for many years now. This article includes a YouTube video and discusses the reasons for looking at this antenna, its design, and its installation. There are some on-air comparisons against three regular double bazooka (coax) dipoles and the Par SWL End-Fed antenna.

A bazooka coax antenna for 40 meters band design by CA6TYS

Build a double bazooka antenna. This website offers pictures and diagrams of bazooka antennas for all Bands, from 6m to 160m

A six meter band 3 element yagi beam antenna project with shortened elements using coax cables with the outer ends stripped and the center conductor shorted in somewhat of a Bazooka antenna.

Maxcon makes and sells Amateur Radio Antennas. Double extended Zepp antenna, multiband dipoles, bazooka antennas, and VHF Jpole, made in USA

Sort of similar to the one of the 6m omni. Instead of using twin-lead, this design makes use of a more or less regular double bazooka antenna (coaxial dipole). Your attention shall be drawn to the available standart literature, such as Rothammel. In order to "compute" the dimension, Karl Rothammel mentioned that the total length of the dipole shall be 95% of the free-space wavelength. The short-circuit bridges (closing the folded dipole) are to be placed at a distance-fraction being equal to the velocity factor of the coax cable used, which will be 66% using RG-58 or RG174.

Ultimax antennas manufacturer of amateur radio End-Fed and bazooka antennas made in USA

A quarter wave vertical omni-directional antenna for 7 MHz. Formulas for dimensions in feet and meters are provided. Ideal radial angle is between 35° and 45°. Velocity factor (Vf) varies based on coax type.

The Bazooka antenna, a coaxial dipole, functions as an omnidirectional antenna with vertical or horizontal polarization. Patented in 1939 and refined in 2006, it features a quarter-wavelength coaxial cable with separated conductors. The outer conductor connects to a sleeve, while the inner conductor extends vertically. Initially complex, it has been simplified for versatile use, including military applications. Adding elements can modify its behavior for NVIS or Yagi-Uda configurations. Experiments in 2007 at the Campus de Pesquisas Geofísicas in Paula Freitas-PR demonstrated consistent VHF and UHF performance, showing reliable return loss measurements despite variable weather.

The Dipole Bazooka Antenna for 40 meters is a popular choice among amateur radio operators. Its design allows for easy construction using materials like RG58 coaxial cable and PVC. Measurements are calculated using specific formulas; for instance, at a frequency of 7,100 MHz, the total length is approximately 19.74 meters. This antenna offers a performance range of 97% to 99%, with an impedance of 49 to 52 ohms. Additionally, it can handle up to 1 kW of power and requires no modifications for connection.