Kenwood TS-590S
Kenwood TS-590S
Sort:
Related Categories
-
Kenwood TS-590S remote control software -
KSM Kenwood Smart Memory is a program to read and update the memory channels of a Kenwood amateur radio. The current supported types are: TS-450S, TS-570D, TS-570S, TS-690S, TS-870S, TS-940S,TS-950S. -
Download software for Kenwood Transceivers, like TS-990S TS-590S, TS-2000, TS-480HX or TS-480SAT -
A web site deticated to the Kenwood TS-590 transceiver with links to software downloads fot the 590s seriend and technical documentation in Russian. -
An article comparing the Kenwood TS 590S to the Elecraft K3 -
Rigpix page for Kenwood TS-590S -
Kenwood TS-590S features, accessories, specifications and details -
A group dedicated to the HF Kenwood Transceiver TS-590 S -
Step by step instructions for setting up N1MM Logger to communicate with the TS-590S using the USB connection -
How to use a small USB DJ controller to remote control the Kenwood TS-590s -
Extension of the Kenwood TS-590S Programmable Function by CT7AEZ -
Installing the optional TCXO, named SO-3 in the Kenwood TS-590S by TK5EP -
There are 2 possible TX extensions on the E version, either full TX (1.705 - 30 MHz) or just open up 5 MHz (cut the R968 jumper and make it into a K version). This mod has been tested on TS 590S and not on TS 590SG -
Wiring a Balanced Microphone to the TS-590S Unbalanced Microphone Input -
How to connect and key Power Amplifiers to Kenwood TS 590 or TS 990. How to home made custom Remote cable to key power amplifiers by JG1VGX -
Official kenwood document explaining proper procedure to upgrade firmware on a Kenwood TS-590S -
The article describes ongoing issues with a new TS590s transceiver, including intermittent reception and transmission failures. After a repair diagnosed as a "Control Unit interruption," the problem persisted. The author discovered the cause was a poorly crimped CN601 connector on the Control Unit board, leading to signal loss when moved. Soldering the connector resolved the issue. Similar problems reported by other users suggest a potential defect in the cables, pointing to a possible manufacturing issue. -
Download the Kenwood TS-590S and TS-590SG virtual port Driver for Windows 10/11 and Windows 8. This driver is also valid to control TS-990S, TS-890 -
W1AEX Audio settings and general observations -
This HOWTO explains in detail how you can use the Kenwood TS-590S USB, COM and ACC2 ports for digital operation, set up the radio for digital data and digital voice operation -
Here a comparison of Kenwood TS-590S used with MC-60A and the oringina dynamic microphone -
This page describes some of the settings needed to properly connect the USB port to handle audio and PTT -
Adding a Pan-adapter to the Kenwood TS-590S -
Configure the Kenwood TS-590S for Digital Voice Keying DVK, a must for contesting. -
The KA7OEI Blog offers random musings on technical subjects related to amateur radio, with a focus on improving stability using the QRP Labs ProgRock 2. It provides insights and tips for ham radio operators looking to enhance their equipment. -
A DK5TX article on Kendoowd TS-590 ALC problem with ALC spikes and other interesting topics -
Extending TX for the Kenwood TS-590s HF Transceiver -
Kenwood TS-590S QST review comments and table comparison vs Elecraft K3 -
With high impedance earphones plugged into the audio jack on the Kenwood TS-590S or TS-590SG, you can hear a really annoying noise even with the AF volume set to zero. A simple quick-and-dirty solution is a resistor in series to the audio output. -
This article describes how to make a simple receiver Out adapter cable for the Kenwood TS-590S, so a second receiver can be connected and used as a pan-adapter -
This software enables remote monitoring of the Kenwood TS-590SG HF transceiver. Based on a lightweight, text-based monitor was developed using Python and ncurses. It connects via rigctld, displaying key metrics like frequency, power, SWR, and TX/RX state with minimal data usage. Ideal for low-bandwidth remote operation, it works over SSH or mobile data. The software is open-source under GPL v3. -
Kenwood TS590 memory management software for windows -
Setting up Digital voice keyer via USB for Kenwood TS-590 -
Win-Test Contest Logger scripts for VGS-1 Voice keyer module for the TS-590 by DK5TX