DXZone.com  
Home : Software : Utilities
Search
in "Utilities"

Utilities

Radio Tools and Utilities for amateur radio operators

(Featuring 97 resources)
Additional Categories
Site listings
 Home : Software : Utilities Add a link

    Most Popular
    • IP-Sound - IP-Sound is a Free application for audio exchange client to client over a TCP/IPv4 network (Lan/Internet). The main purpose for the existence of IP-Sound is to provide low quality audio 8-16kHz, with low latency for use together with remote control software for "ham" radio amateur equipment. IP-Sound is developed by SM5VXC.
    • DXView - A free application that displays location information determined from a callsign, displays translations of common "QSO words and phrases" in the languages used in the callsign's DXCC entity, displays beam headings and SpotCollector DX Spots on a world map, displays country maps, and provides point-and-click control of antenna rotators from AlfaSpid, ARSWIN, Heath, Hygain, M2, Prosistel, SARTek, TIC, Trackbox, and Yaesu
    • QSL Maker - Freeware Windows QSL card printer software. This tool will let you create you own QSL cards importing pictures and customizing colors and other cards aspects. Print directly to your ink-ject or laser printer. Runs on windows systems by wb8rcr
    • HamCalc v1.3 - By G4VWL, HamCalc is collection of calculators for radio amateurs: Antenna ERP calculations. Attenuators. Audio Filter design.Coil Winding. Decibels. Great Circles map and calculator HF Filters HF Traps Metric conversions OP Amps QRA Locator to Latitude/Longitude (and back) Radio Horizon calculator Resonance Satellite orbit calculator Timer calculations (555 timer)Zener Diode calculations
    • DX Monitor - DX Monitor is a standalone Win 95/98/NT program which monitors the DX announcements available on the internet at DX Summit and presents the information in a sortable grid format and on a map centered on your location.
    • Voice descrambler - This program descrambles band inverted encrypted transmissions, usually found on VHF/UHF. It uses a NCO (numerical controlled oscillator) to re-produce the originally inverted audio band. Use it only if legally permitted in your country. I assume no responsabilities deriving from its use. Standard disclaimer applies
    • Vacuum Tube Software - The VTDATA software package is a complete vacuum tube manual on your computer. It has all the information you'd expect in a tube manual. VTDATA's database also includes vacuum tubes of historical interest, such as the early "two digit" types (45, 80, etc.) and hi-fi audio types.
    • Freeware shack utilities - Shack clock and ID timer plus easy to use logging note taker.
    • Coax Cable loss and SWR calculator - This small window application will calculate Coax Cable loss from SWR and SWR from Cable Loss
    • Ham Helper - Ham Helper is a tool that will help Ham Radio operators with many tasks. Features include UTC Time display, Callsign Country lookup, internet callsign lookup, band plans, W1AW schedule, bearing/distance calculation and more.
    • S Meter Lite Software - S Meter Lite is a no-cost program that displays your receiver's S Meter signal strength in a window by W8WWV
    • DX ToolBox - DX Toolbox searches the web for you, gathering information on solar and geomagnetic conditions that affect radio propagation. It's ideal for the ham radio operator, shortwave listener, or other radio enthusiast.
    • AA3RL Transmission Line Calculator - Excel spreasheet that calculate virtually every transmission line parameter that one may need. Include Length conversions, Reactance and Length of Stubs
    • CS-V8000 Cloning software - Icom csv-8000 cloning software for icom ic-v8000 mobile transceiver.
    • DXSpotter - DXSpotter is a commercial Win32 HAM radio application for working with DX Clusters by using TCP/IP protocol for communications. It is adapted to satisfy most DXer's needs. DXSpotter includes 2 programs in one: DXSpotter for connections via telnet protocol to more than 200 DX Clusters, and DXSpotter-Summit for connections to OH2AQ's WEB cluster DXSummit page with automatic page refresh (minimum period 1 minute).
    • Double Tone Generator - Double tone generator for testing intermodulation
    • Meter - This meter scale drawing program is designed to have a computer do the hard work in making a precision scale for a d'Arsonval analog meter. The resulting scales will typically be nicer-looking than those found on many commercial meters.
    • WL7AML Intermod program - This program will run all possible combinations of every transmitter against every receiver in its list
    • SpotCollector - A free application that captures DX and WWV spots from up to 5 internet clusters and a local packet cluster. DX Spots are merged and stored in a Spot Database on your PC, enabling you to monitor, sort, and filter them in real time; known LotW participants are highlighted, as are needed stations. WWV spots are plotted to show SFI, A, and K over the last solar revolution.
    Alphabetical
    • DXView  pop - A free application that displays location information determined from a callsign, displays translations of common "QSO words and phrases" in the languages used in the callsign's DXCC entity, displays beam headings and SpotCollector DX Spots on a world map, displays country maps, and provides point-and-click control of antenna rotators from AlfaSpid, ARSWIN, Heath, Hygain, M2, Prosistel, SARTek, TIC, Trackbox, and Yaesu
      [Hits: 23374 | Votes: 544 | Rate: 7.50]
    • HamCalc v1.3  pop - By G4VWL, HamCalc is collection of calculators for radio amateurs: Antenna ERP calculations. Attenuators. Audio Filter design.Coil Winding. Decibels. Great Circles map and calculator HF Filters HF Traps Metric conversions OP Amps QRA Locator to Latitude/Longitude (and back) Radio Horizon calculator Resonance Satellite orbit calculator Timer calculations (555 timer)Zener Diode calculations
      [Hits: 15933 | Votes: 59 | Rate: 4.31]
    • IP-Sound  updated  pop - IP-Sound is a Free application for audio exchange client to client over a TCP/IPv4 network (Lan/Internet). The main purpose for the existence of IP-Sound is to provide low quality audio 8-16kHz, with low latency for use together with remote control software for "ham" radio amateur equipment. IP-Sound is developed by SM5VXC.
      [Hits: 25774 | Votes: 146 | Rate: 6.83]
    • QSL Maker  pop Priority listing - Freeware Windows QSL card printer software. This tool will let you create you own QSL cards importing pictures and customizing colors and other cards aspects. Print directly to your ink-ject or laser printer. Runs on windows systems by wb8rcr
      [Hits: 17887 | Votes: 9 | Rate: 9.16]
    • AA3RL Transmission Line Calculator - Excel spreasheet that calculate virtually every transmission line parameter that one may need. Include Length conversions, Reactance and Length of Stubs
      [Hits: 4102 | Votes: 9 | Rate: 6.78]
    • ADIF to Map Amateur Ham Radio Contacts by K2DSL - This web application will read in a ham radio ADIF file produced by many logging programs and map contacts on a Google map.
      [Hits: 283 | Votes: 1 | Rate: 10.00]
    • ADIF.org - Official ADIF Site. ADIF is an open standard for exchange of data between ham radio software packages available from different vendors.
      [Hits: 597 | Votes: 0 | Rate: 0.00]
    • Alert Wizard - Alert Wizard is a small application dedicated to notifying the user of an approaching schedule, or event.
      [Hits: 655 | Votes: 2 | Rate: 9.00]
    • ALL2DTA - Win32 command line utility, that allows you to create Master Callsign Database file (DTA), used in many contesting programs, from different logs in ADIF, Cabrillo, and plain text formats.
      [Hits: 322 | Votes: 0 | Rate: 0.00]
    • Amplifier Simulation Program - ASP 4.0 - Design weak signal GaAs FET or bipolar PreAmps. Automatically designs for optimum gain, NF, VSWR or all.
      [Hits: 2342 | Votes: 12 | Rate: 5.66]
    • Attendance Management System - Software that tracks attendance for ham radio clubs and organizations.
      [Hits: 475 | Votes: 1 | Rate: 10.00]
    • Beacon-Time Wizard Priority listing - BTW is a group of beacon information views and tools to enhance the enjoyment and usefulness of the NCDXF/IARU International Beacon Network and HF radio operation.
      [Hits: 951 | Votes: 9 | Rate: 8.77]
    • CallBook for iPhone - CallBook is an Amateur Radio application that allows you to look up call signs via the free WM7D server, the QRZ Online subscription service or the HamCall subscription server and track active APRS stations on www.aprs.fi. Lookup results can be emailed and the QTH can be instantly viewed in the Maps application
      [Hits: 2975 | Votes: 2 | Rate: 1.50]
    • Callsign Lookup - Callsign Lookup is a simple, small Apple Macintosh application that allows the amateur radio operator with a dedicated Internet connection (DSL, cable) to quickly access online callsign databases
      [Hits: 870 | Votes: 1 | Rate: 10.00]
    • Class E - This program simplifies the design of the single-ended Class E amplifier. Operation is intuitive and encourages "tuning" and exploration.
      [Hits: 591 | Votes: 3 | Rate: 6.00]
    • Coax Cable loss and SWR calculator - This small window application will calculate Coax Cable loss from SWR and SWR from Cable Loss
      [Hits: 5648 | Votes: 46 | Rate: 3.09]
    • ComTekk Tone Generator - ComTekk Software Tone generator for 2-way radio signaling. Use sound card to generate CTCSS, DTMF, tone remote, ANI and more. Synthesizer for simulation and testing of 2-way radio systems, repeaters, remote control, ANI, Paging and more
      [Hits: 2465 | Votes: 1 | Rate: 1.00]
    • Conductor Training - Conductor is a training tracking software that can organize any type of education, training, certification or license. It generates a multitude of reports perfect for regualtory bodies, free demo.
      [Hits: 600 | Votes: 1 | Rate: 10.00]
    • CS-V8000 Cloning software - Icom csv-8000 cloning software for icom ic-v8000 mobile transceiver.
      [Hits: 3488 | Votes: 6 | Rate: 5.83]
    • DDS VFO Controller - Control the NJQRP DDS Daughtercard from your PC. The DDS Controller has eight user programmable configurations. Each of the eight configurations have twenty memory cells for saving and recalling frequencies
      [Hits: 1375 | Votes: 5 | Rate: 3.20]
    • Defpom's CB Radio Simulator - It is a application which can be used for troubleshooting CB radio faults, by giving a graphical display of the normal operating frequencies generated by various parts of the CB radios circuits, it can help you identify if a frequency is incorrect or even missing. Another good use for this software is simulating possible frequency expansions, as it allows you to choose any frequency that the PLL is capable of generating, so you can see what the radio will allow you to get !
      [Hits: 1233 | Votes: 1 | Rate: 10.00]
    • DF3CB BV QSL Management and printing - DF3CB site, contesting, and software BV is a professional freeware software for the QSL Management and Label/QSL Printing under Windows developed and distributed by Bernd Koch, DF3CB, since 1989. It is mainly designed for the contester and QSL manager with high QSL quantities but useful for all other QSL'ing purposes as well. Includes logging features
      [Hits: 1581 | Votes: 4 | Rate: 6.00]
    • DF9CY Project Auriga - PA is a JAVA software package containing several programs, SW/VHF/UHF Logbook (imports format from RADIOMAN, VMT), Log conversion to HTML format, Import and export functions for RADIOMAN, CT RES files, BV QSL Labels, CSV etc. Internet DX-Cluster support, Keeps track of your worked Callsigns, Checks your worked Grid Squares per band, Databases for worked Grids and Callsigns Uses K1EA CQWW.CTY country file, Easy command line version for terminal operation Moontracking as clock, Pathloss calculation
      [Hits: 1327 | Votes: 0 | Rate: 0.00]
    • Diplexer - This program expedites the design of lumped-element diplexers using both the lowpass/highpass and the bandpass/bandstop topologies.
      [Hits: 1077 | Votes: 5 | Rate: 4.60]
    • DL9VF Exam Trainer - Franks US license exam trainer, a PC program to prepare yourself for the written test (element 2,3 and 4) of the amateur radio exam performed by the FCC/VEC
      [Hits: 305 | Votes: 2 | Rate: 10.00]
    • Double Tone Generator - Double tone generator for testing intermodulation
      [Hits: 3301 | Votes: 9 | Rate: 6.45]
    • Drupal Ham Radio Module - Import ADIF logbook , Display and search logbook, Display and statistics
      [Hits: 177 | Votes: 1 | Rate: 10.00]
    • DTMF encoder - Generates dial tones using the Soundcard. A neat tool for sending out short sequences of DTMF tones.
      [Hits: 1196 | Votes: 0 | Rate: 0.00]
    • DX Bulletin Reader - Freeware windows program that allow you to read, search and archive dx news bullettins by Alex, VE3NEA
      [Hits: 196 | Votes: 0 | Rate: 0.00]
    • DX Monitor - DX Monitor is a standalone Win 95/98/NT program which monitors the DX announcements available on the internet at DX Summit and presents the information in a sortable grid format and on a map centered on your location.
      [Hits: 10690 | Votes: 24 | Rate: 7.08]
    • DX ToolBox - DX Toolbox searches the web for you, gathering information on solar and geomagnetic conditions that affect radio propagation. It's ideal for the ham radio operator, shortwave listener, or other radio enthusiast.
      [Hits: 4731 | Votes: 3 | Rate: 6.00]
    • DXSpotter - DXSpotter is a commercial Win32 HAM radio application for working with DX Clusters by using TCP/IP protocol for communications. It is adapted to satisfy most DXer's needs. DXSpotter includes 2 programs in one: DXSpotter for connections via telnet protocol to more than 200 DX Clusters, and DXSpotter-Summit for connections to OH2AQ's WEB cluster DXSummit page with automatic page refresh (minimum period 1 minute).
      [Hits: 3383 | Votes: 15 | Rate: 7.13]
    • EDI to ADIF utility - Free software for converting EDI (Electronic Data Interchange) files to ADIF (Amateur Data Interchange Format). EDI is standard recommended by IARU for sending files in UKV/VHF/SHF contest in first IARU region
      [Hits: 438 | Votes: 3 | Rate: 4.00]
    • EMI Calculator - Does your Amateur Radio system comply to the EMI rules ? (German values implemented)
      [Hits: 1019 | Votes: 7 | Rate: 7.15]
    • eQSO - Dedicated ham radio internet gateway and server system. It is intended for use by RF gateways and PC users connected to the internet
      [Hits: 2558 | Votes: 8 | Rate: 7.12]
    • ERP Calculator - DOS program that will assist you in determining your 2 meter station's Effective Radiated Power (ERP)
      [Hits: 1234 | Votes: 34 | Rate: 5.62]
    • ExtFSK by MM HamSoft - EXTFSK.DLL is an MMTTY extension that interfaces MMTTY to a user-made hardware device via serial port, parallel port or USB
      [Hits: 328 | Votes: 0 | Rate: 0.00]
    • EZCalls - Windows ham radio callsign lookup utility, thatwWorks with internet, QRZ CD, or HamCall CD
      [Hits: 213 | Votes: 1 | Rate: 8.00]
    • F-Intermod - Intermodulation Software - F-Intermod calculates RF intermodulation products for up to 1000 channels by Telecom Engineering Inc.
      [Hits: 1659 | Votes: 8 | Rate: 6.75]
    • F1EHN's EME System - Suited for EME operation, traffic procedures in real time
      [Hits: 645 | Votes: 3 | Rate: 8.00]
    • Freakin’ Beacon Setup Program - A small program to simplify changing messages in the Expanded Spectrum Systems Freakin' Beacon controller. The program makes it easy to modify an existing message or to have multiple messages available in different files ready to program into the beacon controller.
      [Hits: 789 | Votes: 1 | Rate: 1.00]
    • FRED for UR5EQF_Log3 - Displays the UR5EQF_Log3 radio frequency larger making it easer to read, sends selected list frequency to radio by AL VK4BL
      [Hits: 33 | Votes: 0 | Rate: 0.00]
    • Frees - Calculates the freespace range of a radio-link. It is useful for radio amateurs, radio engineers and for SETI signal estimations. Calulation of parabolic dish antenna-gain is included.
      [Hits: 1299 | Votes: 0 | Rate: 0.00]
    • Freeware shack utilities - Shack clock and ID timer plus easy to use logging note taker.
      [Hits: 7734 | Votes: 7 | Rate: 7.57]
    • Ham Club Membership - Ham club membership management software, designed to assist either the secretary, membership chairman, or any one else in a ham radio club to maintain accurate records about it's membership, vital documentation, or club assets by Alpine Software
      [Hits: 538 | Votes: 2 | Rate: 7.50]
    • Ham Helper - Ham Helper is a tool that will help Ham Radio operators with many tasks. Features include UTC Time display, Callsign Country lookup, internet callsign lookup, band plans, W1AW schedule, bearing/distance calculation and more.
      [Hits: 5539 | Votes: 11 | Rate: 5.55]
    • Ham Radio and morse Fonts - Amateur radio windows fonts with slashed zero and Phi also listed some morse code fonts available to download
      [Hits: 354 | Votes: 0 | Rate: 0.00]
    • Ham Radio Control Libraries - Hamlib is a library aid for software developers wishing to incorporate control of amateur radio hardware into their programs. Hamlib will allow ham radio software authors to concentrate on the user interface and the basic function of the program rather than radio control.
      [Hits: 485 | Votes: 1 | Rate: 10.00]
    • HamCalc - Add-in module to Microsoft Excel, contains a set of radio amateur relevant special functions: DistSphericLocator(Loc1; Loc2) Calculates the spheric earth model distance between two locators [km] DirSphericLocator(Loc1; Loc2) Calculates the spheric earth model direction from Loc1 to Loc2
      [Hits: 1803 | Votes: 3 | Rate: 3.67]
    • HAMIC - The Ham Intelligent Calculator - HAMIC, is a program designed to simplify a number of calculations commonly used by HAMs. It is designed for the HAM radio hobbyist, but may be useful to others as well. HAMIC has a simple to use, but powerful graphical interface that allows solving simple circuits such as resistors in series or parallel, or more complex circuits such as L networks or T networks. As well, other calculations such as SWR and reactance conversions are supported. Windows shareware.
      [Hits: 1396 | Votes: 2 | Rate: 5.50]
    • HamTime - Announce your callsign at least once every ten minutes. HamTime runs in the corner of the screen and gives you an audible alarm when that announcement is due.
      [Hits: 719 | Votes: 0 | Rate: 0.00]
    • Helical - A graphics-intensive bandpass filter program based on the helical resonator.
      [Hits: 1424 | Votes: 2 | Rate: 9.00]
    • HERALD P2P radio link design - Sw tool to design point-to-point multi-hop microwave links and networks, 400MHz to 58 GHz. Site/Hop Configuration; Customized Antenna & Radio Equipment Libraries; Link Budget; Path Profile Analysis ,clearance, reflections; import path profiles from SRTM maps, free download.
      [Hits: 291 | Votes: 4 | Rate: 6.00]
    • HRDLabel - HRDLabel is a software for printing labels, QSL and envelope using the Ham Radio Deluxe logbook database.
      [Hits: 2248 | Votes: 0 | Rate: 0.00]
    • HugeIcom - This is a very simple program which helps visually handicapped people to see the frequency and mode of the rig. Or maybe it's useful for demos, trade shows or similiar. It will work with any Icom except the IC-735.
      [Hits: 906 | Votes: 1 | Rate: 10.00]
    • IC-Prog Prototype Programmer - PIC Programmer software package that allows you to program all types of serial programmable Integrated Circuits using Windows 95/98/NT/2000/ME/XP
      [Hits: 881 | Votes: 5 | Rate: 5.00]
    • ID Wizard - ID Wizard is an ID timer with system clock setting and miscellaneous tools. Tools includes Notes, a full-featured “text” editor, Calculator, Calendar for sun/moon times, Time Zone Browser Conversion Utility Area, Distance, Mass, Power, Temperature, Time and Volume, Trace Route, Ping and WhoIs
      [Hits: 829 | Votes: 2 | Rate: 10.00]
    • iPhone Ham Radio Callsign Lookup - This webapp provides an iPhone-compatible lookup of Amateur Radio Callsigns. It provides the name, address, and license class (from the FCC’s public records) of any US-Licensed Amateur Radio Operator.
      [Hits: 1650 | Votes: 4 | Rate: 3.50]
    • JQAM (QAM modem) - Transmit audio/video, UDP packets, http, rs232, with QAM using the soundcard rates up to 100kb/s.
      [Hits: 998 | Votes: 2 | Rate: 9.50]
    • K3 Meter - Analog S-Meter for the Elecraft K3 for Windows and MacOSX
      [Hits: 560 | Votes: 0 | Rate: 0.00]
    • KM5KG network designer - Windows98 Program for RF Design
      [Hits: 1799 | Votes: 4 | Rate: 7.25]
    • Locator - This is a handy windows locator program from OH3NJC Ilkka, includes C source codes and formulas
      [Hits: 1623 | Votes: 6 | Rate: 3.67]
    • Master.dta Editor - Freeware windows program by WE3NEA that allow to view and edit the Master Callsign Database file used in many contesting programs, import and export callsigns, auto-download announced DX operations.
      [Hits: 1651 | Votes: 4 | Rate: 2.25]
    • Meteor and Colorgramme - FREE specialized software in the detection and registration of echoes radio products by meteors shower, falling star, at the time of their gone in atmospheric. They are destined to all possessors of a radio and a computer, interested parties by this simple technique of radioastronomy.
      [Hits: 1115 | Votes: 2 | Rate: 8.50]
    • Meter - This meter scale drawing program is designed to have a computer do the hard work in making a precision scale for a d'Arsonval analog meter. The resulting scales will typically be nicer-looking than those found on many commercial meters.
      [Hits: 3249 | Votes: 4 | Rate: 7.75]
    • MeterMate - SWR Graphing Software for Amateur Radio by KD4UDY, shareware
      [Hits: 1011 | Votes: 0 | Rate: 0.00]
    • miLog Reporter - Reporting program that help you keep track of contacts and take care of the routing activity of creating reports and QSL cards. Require miLog logging program
      [Hits: 493 | Votes: 1 | Rate: 3.00]
    • MiniErrorCorrection Program - This simple program was written as a possible utility for those attempting to communicate using digital modes via paths that are intermittent and tenuous such as Aircraft Scatter at VHF and Low Earth Orbiting Satellites by G3PPT.
      [Hits: 287 | Votes: 0 | Rate: 0.00]
    • MM-TNC - This package contains a sample code for the MMTTY custom TNC emulation. It is supposed to run on the same PC or on the remote PC, and offers the functions of the TNC emulation.
      [Hits: 375 | Votes: 1 | Rate: 8.00]
    • NDBfinder - NDBfinder allows you to use your PC and soundcard to receive, detect, identify and log NDBs (Non Directional Beacons used for maritime and aeronautical navigation)
      [Hits: 1400 | Votes: 1 | Rate: 9.00]
    • Omni-Rig - A COM component for transceiver/receiver CAT control. Not a complete program, but rather a component tool that allow software developers to connect their program to a supported transceiver.
      [Hits: 1754 | Votes: 2 | Rate: 5.00]
    • Online Callbook for Internet Explorer - The Online Callbook for Internet Explorer makes it easy to find QSL information from the most popular HAM-radio web sites, such as QRZ.COM, ARRL.ORG, RAC.CA, QRZ.RU, BUCK.COM and OCTAVIA.COM,
      [Hits: 890 | Votes: 5 | Rate: 7.00]
    • PalmVE - PalmVE is a program for Palm based handheld computers that is built to aid as a virtual volunteer examiner for amateur radio written tests
      [Hits: 210 | Votes: 1 | Rate: 5.00]
    • Panel and Dial - Freeware windows and linux tools to design front panels and dials labels for your home-brew projects.
      [Hits: 1970 | Votes: 10 | Rate: 1.90]
    • Pathfinder - A free application that searches more than 100 web-accessible sources to locate QSL information for a callsign that you enter once
      [Hits: 2043 | Votes: 651 | Rate: 7.87]
    • Pathloss Calculation and EME - Java free space pathloss calculation and EME
      [Hits: 1972 | Votes: 45 | Rate: 4.90]
    • PLL2 - 2nd Order phase locked loop design for passive and active circuits. Bode plot, step response, design parameters
      [Hits: 1321 | Votes: 3 | Rate: 5.33]
    • PreFind - A Free Prefix, DXCC and Locator program for Windows
      [Hits: 696 | Votes: 1 | Rate: 10.00]
    • QSO Clock - little program for those that can never find a pencil when we hear the DX station calling CQ on the frequency on which we're tuned up.
      [Hits: 587 | Votes: 0 | Rate: 0.00]
    • QTF Calculator for 10 GHz Beacons - 10 GHz Beacon Database in excel format that Calculates the QTF from any locator to any beacon
      [Hits: 271 | Votes: 0 | Rate: 0.00]
    • QuickMix - Freeware windows program that allows you to store configuration of your audio mixer in a settings file, and to restore the mixer to that state whenever you want. Useful for digital mode operations where different dsp programs may require different audio in and out settings.
      [Hits: 996 | Votes: 1 | Rate: 10.00]
    • Radio Works - RadioWORKS is a tool for calculating various items related to radio waves and radio wave propagation. Get detailed information about a frequency, such as the free-space wavelength, band classification, propagation methods, common transmitter configurations, etc. Calculate antenna lengths or frequencies. View a 3D coverage map by providing a latitude / longitude coordinate and transmitter height.
      [Hits: 1950 | Votes: 3 | Rate: 3.00]
    • RevLoad - This graphics-intensive program reveals the load on the output of a matching-network, based on measurements of the components in that network. Adjust the network (tuner) for a flat input, measure or look up the network component values and you will immmediately see the R and jX values of the load on the network, presented as both a schematic with the component values and as a Smith Chart normalized to the specified system impedance.
      [Hits: 430 | Votes: 1 | Rate: 10.00]
    • S Meter Lite Software - S Meter Lite is a no-cost program that displays your receiver's S Meter signal strength in a window by W8WWV
      [Hits: 5360 | Votes: 1 | Rate: 2.00]
    • ScannerCast - Lets you listen to your scanner across your own network, or via the internet. Shoutcast/ICEcast compatible broadcasting for Uniden and GRE scanners. Broadcast your audio from your PC.
      [Hits: 1012 | Votes: 1 | Rate: 10.00]
    • Simple Beacon Monitor - Displays the actual transmitting beacons of the NCDXF/IARU Beacon Project.
      [Hits: 1252 | Votes: 4 | Rate: 6.25]
    • SpotCollector - A free application that captures DX and WWV spots from up to 5 internet clusters and a local packet cluster. DX Spots are merged and stored in a Spot Database on your PC, enabling you to monitor, sort, and filter them in real time; known LotW participants are highlighted, as are needed stations. WWV spots are plotted to show SFI, A, and K over the last solar revolution.
      [Hits: 3079 | Votes: 189 | Rate: 9.01]
    • The Pecker - The Pecker is a software application that emulates an existing hardware amplifier tuning aid operated in SSB mode as apposed to CW or AM. As such no carrier is used by G7EIX
      [Hits: 125 | Votes: 4 | Rate: 10.00]
    • TLE for windows - Transmission Line equations for Windows. Written in Visual C++. This program provides the most comprehensive analysis of a transmission line by w9dmk
      [Hits: 848 | Votes: 1 | Rate: 5.00]
    • Trusted QSL - Open source libraries and utilities to support using digital signatures for Amateur radio QSL system information like eqsl and lotw. Available for windows macos e linux.
      [Hits: 1620 | Votes: 2 | Rate: 10.00]
    • USA lite - The Ultimate Shack Assistant contains 21 operating aids and useful charts. Everything from station clock to station log by w4kgu
      [Hits: 601 | Votes: 14 | Rate: 7.37]
    • Vacuum Tube Software - The VTDATA software package is a complete vacuum tube manual on your computer. It has all the information you'd expect in a tube manual. VTDATA's database also includes vacuum tubes of historical interest, such as the early "two digit" types (45, 80, etc.) and hi-fi audio types.
      [Hits: 7803 | Votes: 12 | Rate: 2.50]
    • VectorFox - VectorFox is a software born to incorporate a PC into the fox hunting environment. VectorFox is able to take inputs from up to 5 sources, such as a 2m beam, a 2m signal meter, a TDOA, etc, and display the results on the screen. VectorFox also accepts Agrelo inputs. From these results the operator can choose which indication is best and have a line drawn on the map in the direction of the signal.
      [Hits: 1140 | Votes: 0 | Rate: 0.00]
    • VK5PGT Utilities Page - GkjBios, Tfpcx, tfpcx, Tsthwarc Archive Manager, Flexnet baycom drivers, AGWPE driver, TF2AGW v1.1 dll interface
      [Hits: 695 | Votes: 0 | Rate: 0.00]
    • Voice descrambler - This program descrambles band inverted encrypted transmissions, usually found on VHF/UHF. It uses a NCO (numerical controlled oscillator) to re-produce the originally inverted audio band. Use it only if legally permitted in your country. I assume no responsabilities deriving from its use. Standard disclaimer applies
      [Hits: 8360 | Votes: 21 | Rate: 5.86]
    • VQSpot for VQLog - VQSpot is a simple program developed for sending DX-Spots automatically when QSO are logged into VQLog
      [Hits: 283 | Votes: 0 | Rate: 0.00]
    • WL7AML Intermod program - This program will run all possible combinations of every transmitter against every receiver in its list
      [Hits: 3109 | Votes: 11 | Rate: 6.19]
  • Search dxzone.com on Ham radio tools
  • Add to Google
  • Lookup Google Custom Search Engine for Ham radio tools
  • Search Ham radio tools with: Yahoo!, Teoma, Lycos , Bing
  • Share this page


    Add to Google
    Daily Top 10

    Share Bookmark

    Follow dxzone.com: XML RSS Feeds Daily Top 10 links AddThis Feed Button

    DXZone Newsletter


    Enter your email address:

    Delivered by FeedBurner

    Google CSE

    Add to Google

      ©1998-2013 The DXZone.com - Terms of Use, Copyright & Privacy Policy Last Update: Fri Feb 22 2013 - 06:53:18