|
Search
|
 |
your receiver
29 links
about your receiver on dxzone.com
|
Result Page: 1 2 [>>]
Site listings
Antennas : End-Fed
- Feeding an End-Fed Antenna
- End-Fed antennas are NOT balanced systems; but neither are verticals, ground planes, discones, windoms, zepps, Marconis, half-slopers, et al. Additionally, the low-impedance antenna port of your transmitter/receiver is not balanced.
[Hits: 13306 | Votes: 14 | Rate: 7.65] Antennas : Mobile
- Inexpensive GPS mobile Antenna
- An inexpensive external GPS antenna, for 1.5 GHz band for GPS receiver, If you operate APRS or just need an external antenna for your GPS receiver, here’s one that is easy to build yet offers surprisingly good performance in a compact size. Best of all, it uses commonly available components and materials.
[Hits: 12590 | Votes: 9 | Rate: 6.67] Antennas : Shortwave Internet and Radio : Online Receivers
- Your Remote S-Meter
- A Kenwood R-5000 communications receiver located in Salt Lake City that you can remotely control and receive S-Meter readings and audio from via a web browser.
[Hits: 11319 | Votes: 61 | Rate: 8.28] - GlobalTuners.com
- GlobalTuners provides access to web controlled receivers. Listen to Ham radio, Tune Shortwave radio, Listen to Air traffic control, experience Airband receptio including ACARS and Airports. Tune remotely controlled receivers all over the world with your browser and get live audio.
[Hits: 5620 | Votes: 34 | Rate: 5.67] - GlobalTuners
- GlobalTuners provides access to remotely controlled radio receivers over the internet. You can listen to ham radio, shortwave radio, air traffic control, airband, ACARS, airports and much more. Tune remotely controlled receivers from all over the world with your browser and listen live.
[Hits: 7895 | Votes: 27 | Rate: 7.86] Operating Modes : Longwave
- Frequency Calibration for Weak Signal Work
- Accurate calibration of your receiver and sound card is necessary for good results with the weak signal modes in use at LF. Modern receivers with master oscillators that are synthesized to provide all conversion frequencies greatly simplify the process. This article describes a method of making the necessary measurements and adjustments to an ICOM R75 receiver and a sound card, using the ARGO software
[Hits: 581 | Votes: 1 | Rate: 7.00] Operating Modes : Radio Direction Finding
- ARDF80 Receiver
- Documentation to build your onw 80m ARDF receiver
[Hits: 723 | Votes: 0 | Rate: 0.00] Radio Scanning : Beginner's guides Software : ACARS
- AirNav Selcal Decoder
- AirNav Selcal Decoder enables you to decode in realtime Aviation HF Selcal transmissions. It only needs an HF airband receiver and your Sound Card. No special hardware needed. With AirNav Selcal Decoder you do not need any other hardware decoding system. Just your PC and the Sound Card.
[Hits: 9659 | Votes: 34 | Rate: 5.26] Software : Antenna analysis
- S Meter Lite Software
- S Meter Lite is a no-cost program that displays your receiver's S Meter signal strength in a window by W8WWV
[Hits: 4870 | Votes: 1 | Rate: 2.00] Software : DSP
- SA Watch
- SA Watch allows you to monitor and analyze the wandering that your GPS receiver appears to do when it is at a fixed location
[Hits: 992 | Votes: 4 | Rate: 9.75] Software : Decoders
- DSCdecoder
- DSCdecoder decodes the DSC digital signals from ships and coast stations using the sound card in your PC. You need a suitable MF, HF or VHF band radio receiver tuned to one of the DSC distress and calling channels or to one of the Navtex channels
[Hits: 3175 | Votes: 4 | Rate: 5.50] Software : Macintosh
- MacGPS Pro
- Mapping software which links a Garmin GPS receiver to your Macintosh. Includes Maidenhead grid squares and beam-pointing maps.
[Hits: 1487 | Votes: 8 | Rate: 8.37] Software : Navtex
- SeaTTY RTTY/NAVTEX decoder
- Program to receive weather reports and navigational warnings transmitted on longwave and shortwave bands in RTTY and NAVTEX modes. None additional hardware is required - your need only receiver and computer with a sound card.
[Hits: 10120 | Votes: 30 | Rate: 7.43] Software : Pocket PC
- CwGet PPC
Priority listing
- A program to decode Morse code via sound input of PDA to text. No additional hardware required - your need only receiver and PDA with sound input. Built-in microphone of device can be used also.
[Hits: 2352 | Votes: 4 | Rate: 10.00] Software : RTTY
- SkySweeper
- Provides most advanced digital signal processing (DSP) functions to be used together with your HF receiver. All signal processing is done in your PC and no extra hardware is needed. HF/VHF rx & tx and analysis software introducing free advanced SkyBoost and MFSK16 modes!
[Hits: 7464 | Votes: 33 | Rate: 6.63] Software : Radio Control
- EasyTuner
- Easytuner id an excel spreadsheet that tunes your radio. Works with all Kenwood and Icom receivers and transceivers that are computer-controllable.
Sets receiver and transmitter frequency and mode
[Hits: 2319 | Votes: 2 | Rate: 10.00] Software : Satellite tracking
- WXtoImg
- Integrated weather satellite recorder, decoder, image viewer, and editor. Connect a 137-138MHz FM receiver to your soundcard to get images directly from weather satellites
[Hits: 2418 | Votes: 35 | Rate: 7.58] Software : iPhone
- APRS on your phone
- iBCNU is an APRS GPS position reporting and text-messaging application for the Apple iPhone. When position reporting is enabled, the application will periodically send out location of your iPhone using either 3G or WiFi network and iPhone's built in GPS receiver
[Hits: 2552 | Votes: 2 | Rate: 8.00] Technical Reference : Electronics
- Ferrite on Reducing RFI
- Using ferrite to reduce radio frequency interference with your PC monitor or antennas with your receivers or transceivers.
[Hits: 1708 | Votes: 0 | Rate: 0.00] - Simple anti-static device
- With all the wire you have out, you may run into a problem with static buildup on the antennas. This static may try to make its way into your receiver, causing you major problems and damage that can run into a lot of money.
[Hits: 650 | Votes: 1 | Rate: 1.00] Technical Reference : Filters Technical Reference : HF Radios
- Receivers sorted by IM3
- Sorted by Intermodulation. Best receiver first.
This is a measure of how badly a close-spaced signal will trash your receiving with spurious signals or splatter sounds,
[Hits: 396 | Votes: 0 | Rate: 0.00] Technical Reference : Radio Frequency Interference : Noise Reduction
- Noise Sources
- Computers, TV's, and Switching Systems can cause noises to your receiver
[Hits: 566 | Votes: 1 | Rate: 10.00]
|
|
