- Yaesu FT-817ND CAT Display In Python
- Python implementation of CAT system for Yaesu FT-817ND
[ Hits: 1233 | Votes: 5 | Rating: 6.4 ]
- RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra (see above) or to interface your radio to a huge database of frequencies.
[ Hits: 24225 | Votes: 27 | Rating: 6.71 ]
- AIO All in One by WD8KNC
- Windows contest logging software with multiple functions like antenna rotor control, dx cluster, cat control, voice and cw keying, supports many data modes, qrz lookup, pirint qsl and labels, mapping and more. Donationware software.
[ Hits: 12686 | Votes: 14 | Rating: 5.78 ]
- Alpha 87a Communication
- Alpha 87a Communication can be used either stand alone to control the Alpha 87a amplifier or together with several CAT-Control programs by HB9ZS
[ Hits: 343 | Votes: 0 | Rating: 0 ]
- Antenna Rotator System
- The ARS will allow to control any antenna rotator (Azimuth & Elevation) from a computer. Even if you are only interested on HF arrays, the ARS will allow it. Supported from most programs as CT for DOS, tracking programs.
[ Hits: 17431 | Votes: 33 | Rating: 5.94 ]
- AR8200 Computer Control Software
- Ar8200 computer control software jaor is the ultimate in management for the aor 8200 mki, mkii and mkiii radio scanner. the software allows full function control, memory management, configuration and remote access of the radio.
[ Hits: 2875 | Votes: 8 | Rating: 6.78 ]
- Kenwood TS-590S remote control software
[ Hits: 1275 | Votes: 1 | Rating: 1 ]
- ARCS II - TS-2000 control
- Amateur Radio Control System for the Kenwood TS-2000 by WB5KIA
[ Hits: 20866 | Votes: 56 | Rating: 7.75 ]
- This is the most advanced scanner software for the AR8200 and the AR8600. It can effect any type of scan, can scan from 1KHz to 3000MHz in one time. The AREight is a software for help you to listen signals from around the globe on the shortwave bands
[ Hits: 3437 | Votes: 14 | Rating: 5.43 ]
- AUDIO590 - Audio Setup for TS-590
- Audio590 is a Windows program that lets you set up and manage audio profiles for use with a TS-590SG or TS-590S transceiver. You can read existing audio settings from the radio, display them on the control panel, change them and then write them back to the radio. You can also save the settings on disk, and retrieve them later when you need them.
[ Hits: 140 | Votes: 0 | Rating: 0 ]
- BC780XLT Remote Control PalmOS
- BC780XLT Uniden Bearcat Remote Control Software for the PalmOS freeware
[ Hits: 920 | Votes: 4 | Rating: 5.5 ]
- BktRemote Suite is a package of programs that allow you to control the transceiver with different devices via a LAN connection or WiFi. The whole suite is composed by BktRemoteServer and BktRemoteClient
[ Hits: 136 | Votes: 0 | Rating: 0 ]
- BuTel Software
- Software Information PC Interfaces for the scanning radio hobbyist & professional radio control applications
[ Hits: 15426 | Votes: 14 | Rating: 7.15 ]
- CallSign Software
- Hi-end software for the Ten Tec software radio line inluding Pegasus Jupiter and RX-320
[ Hits: 2512 | Votes: 206 | Rating: 5.55 ]
- CallSign Software
- HamStationExtreme, hamradiostation and scopestation makers. CallSign Software provides a variety of Radio Control Packages to drive ICOM, Elecraft, and Ten-Tec's latest DSP based Transceivers and Receivers.
[ Hits: 1987 | Votes: 9 | Rating: 4.56 ]
- CatBKT Universal CAT Control
- Program for the control of the transceiver from your PC. Works on windows and has been tested with different serial and USB interfaces, Based on hamlib libraries , Auto CQ for repetitive calls, Audio Recorder, BktNetInterface for JTDX and WSJT-X
[ Hits: 348 | Votes: 1 | Rating: 3 ]
- CATconv Yaesu FT-991 HamRadio Deluxe Controller
- This app permit to work in DigiModes using the latest free version of HamRadio Deluxe Suite 188.8.131.52 with the new Yaesu FT-991 (which is not supported in that version of the application) using the Yaesu FT-950 model in HRD
[ Hits: 530 | Votes: 1 | Rating: 8 ]
- FT-100 radio control software by N2OHZ
[ Hits: 1385 | Votes: 1 | Rating: 1 ]
- A free application that controls up to 4 Alinco, Elecraft, FlexRadio, Icom, JST, Kachina, Kenwood, TenTec, or Yaesu transceivers, switching between them manually or automatically based on frequency, and displaying frequency-dependent settings for devices like tuners and amplifiers;
includes a bandspread, and supports transverters, frequency and mode tracking by an independent transceiver or receiver, SDR-based panadaptors,
and SO2R switching with microHam or OTRSP-compliant devices.
[ Hits: 86458 | Votes: 1215 | Rating: 6.18 ]
- CommCat goes beyond rig control and logging to provide many new features designed to help you work and confirm DX, and learn in the process. Free Demo download. Requires Windows 95 or later.
[ Hits: 2564 | Votes: 18 | Rating: 7.27 ]
- Computer Aided Technologies
- Producers of Scancat, Copycat, Magic and Distributors of HOKA's CODE-3 and CODE-30 decoders.
[ Hits: 2628 | Votes: 4 | Rating: 7.25 ]
- Computer-supported ShortWave Listening
- RxWings, a radio control program to support swl with the AR7030, NRD-535/545 and RX320
[ Hits: 4980 | Votes: 6 | Rating: 4 ]
- Control CAT FT 847
- Control software for Yaesu FT-847
[ Hits: 11831 | Votes: 59 | Rating: 5.51 ]
- Control program for TM-D710
- Software to control the frequency and the band on the Kenwood TM-D710.
[ Hits: 1830 | Votes: 17 | Rating: 5.76 ]
- DDUtil for Flex Radio
- Data Decoder Utility is designed to enhance the operating experience for Flex Radio users by providing advanced connectivity to Peripheral equipment and radio control programs (RCPs) otherwise not available.
[ Hits: 84 | Votes: 0 | Rating: 0 ]
- DX Buddy is a multi purpose ham radio application that let you control your radios, or controller, offer a logbook, cluster access, qrz lookups, and interface with several popular ham radio applications
[ Hits: 1493 | Votes: 1 | Rating: 8 ]
- Easytuner id an excel spreadsheet that tunes your radio. Works with all Kenwood and Icom receivers and transceivers that are computer-controllable.
Sets receiver and transmitter frequency and mode
[ Hits: 3108 | Votes: 2 | Rating: 10 ]
- ERGO Radio Software
- Creative Express Corporation software to enhance shortwave radio listening. Support for Drake R8A/B, NRD535/D, WJ HF-1000 and TEN-TEC RX-320 receivers, as well as propagation, path evaluation and database management.
[ Hits: 4528 | Votes: 18 | Rating: 7.95 ]
- FGB Wakeup for Yaesu FT RTX
- Home made freeware utility that allows to power on or shutdown the Yaesu FT rig. It has been tested on the FT-5000. It works also on FT 450 950 1200 2000 3000 5000 9000. It does NOT require any installation, just the exe files. Available in client server mode for remote connections
[ Hits: 64 | Votes: 1 | Rating: 10 ]
- FGB-5000 Mini tuning aids
- A small windows utility to control VFO of the Yaesu FT-5000. It is capable to set frequencies for both VFOA abd VFOB. Tested with latest windows versions.
[ Hits: 49 | Votes: 0 | Rating: 0 ]
- FGB-5000 Mini VFO Display
- Home made free utility can be useful to monitor which is the RX and which is the TX VFO and the correspondig frequencies. Works with Yaesu FT-5000.
[ Hits: 79 | Votes: 0 | Rating: 0 ]
- Flrig is a transceiver control program designed to be used either stand alone or as an adjunct to fldigi. It is able to control most popular amateur radio transceivers from ICOM Kenwood and Yaesu. Can share the control over a local area network or can be used as a common gateway to your radio for serveral concurrent applications. Works on Mac Linux and Windows
[ Hits: 2157 | Votes: 5 | Rating: 8 ]
- FRG-Controller by Frans Vink
- Free prgram to control Yaesu FRG 100 SW receiver with a PC
[ Hits: 1749 | Votes: 15 | Rating: 7.75 ]
- FT-100D for PalmOs
- Palm interface for the FT100D by Andre, HB9FBD
[ Hits: 1744 | Votes: 3 | Rating: 2.33 ]
- FT-817 Commander
- The ultimate free CAT program for the Yaesu FT-817 include PSK31 Deluxe.
[ Hits: 15465 | Votes: 55 | Rating: 8.55 ]
- FT-920 CAT Controller Software
- This computer control program is specifically designed for the Yaesu FT-920 transceiver. Freeware windows application.
[ Hits: 1304 | Votes: 3 | Rating: 7.67 ]
- FT100 SuperControl
- CAT control and logging software project especially developed for the YAESU FT-100 transceiver. The program is based on the design of FT847-SuperControl.
[ Hits: 4782 | Votes: 221 | Rating: 7.71 ]
- FT100 XE2NLM
- Another radio control softwrare for the Yaesu FT 100 by Federico Batarse, XE2NLM
[ Hits: 1242 | Votes: 3 | Rating: 6.67 ]
- FT1000MP-SuperControl is a complete CAT control and "better than nothing" logging program, based on the legendary FT847-SuperControl program. The program has been developed especially for the FT-1000MP transceiver series including Mark-V and Field.
[ Hits: 3774 | Votes: 29 | Rating: 6.8 ]
- Free full featured remote control your Yaesu FT-2000, FT-950 and FT DX 5000 for windows by DF3CB
[ Hits: 748 | Votes: 0 | Rating: 0 ]
- Tuning control of the Yaesu FT-736R multiband VHF/UHF transceiver.
[ Hits: 4084 | Votes: 31 | Rating: 5.74 ]
- FT847-SuperControl CAT
- FT847-SuperControl is a CAT software especially for the FT-847 transceiver from YAESU. You can download a trial version.
[ Hits: 9617 | Votes: 474 | Rating: 7.68 ]
- FT857 SuperControl
- CAT control and logging software project especially developed for the YAESU FT-857 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope
[ Hits: 18692 | Votes: 35 | Rating: 5.67 ]
- FT897 SuperControl
- CAT control and logging software project especially developed for the YAESU FT-897 transceiver. Full control of the trcvr, EEPROM modification, VoIP, TCP/IP remote control, macro CW keyer, visual band scope
[ Hits: 16826 | Votes: 24 | Rating: 7.91 ]
- Memory management (cloning) software for the Yaesu FT-8900R quad band FM mobile transceiver
[ Hits: 4304 | Votes: 15 | Rating: 2.41 ]
- FTBasic is a CAT control program for Yaesu radios FT100, FT817, FT847, FT1000MP Mark V and FRG100
[ Hits: 19484 | Votes: 63 | Rating: 5.79 ]
- FTBCAT Cat radio control software
- Free CAT control software for Yaesu FT-100, FT-100D, FT-817, FT-817ND, FT-847, FT-857, FT-857D, FT-897, FT-897D, FT-920, FT-1000MP Mark V, VR-5000 and FRG-100 transceivers.
Version 2.1 for Windows. Ths Software no more supported or developed.
[ Hits: 48447 | Votes: 146 | Rating: 4.69 ]
- FTBVR5K VR-5000 Radio control
- Memory management programming software for the Yaesu VR-5000 receiver
[ Hits: 4147 | Votes: 13 | Rating: 5.92 ]
- GBCAT is free PC software for controlling amateur radio devices through a COM/USB port or through a TCP/IP network, with the ability to transfer a 2-way audio signal over a TCP/IP network supporting Yaesu FT-857 FT-817 FT-897, Icom IC-706MKIIG, Kenwood TS-2000 and TS-590S by 9A2GB.
[ Hits: 2472 | Votes: 44 | Rating: 9.14 ]
- Grig is a simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled.
[ Hits: 1673 | Votes: 0 | Rating: 0 ]
- Grig Radio Control
- Grig is a freeware simple Ham Radio control (CAT) program based on the Ham Radio Control Libraries (Hamlib). It is intended to be highly generic presenting the user to the same graphical user interface regardless of which radio is being controlled.
Grig supports the most commonly used CAT commands that are implemented by Hamlib, and integrates well with other ham radio programs like Xlog and gMFSK.
Grig has been developed on Linux, but has been ported on Mac and Windows OS.
[ Hits: 25876 | Votes: 16 | Rating: 5.88 ]
- Ham Radio Control Libraries - HamLib
- Hamlib is a library aid for software developers wishing to incorporate control of amateur radio hardware into their programs. Hamlib will allow ham radio software authors to concentrate on the user interface and the basic function of the program rather than radio control.
[ Hits: 1072 | Votes: 3 | Rating: 7 ]
- A Free windows, universal program for RIG control,
can read and set mode and frequency on your transceiver. The program can control ICOM, Yaesu and Kenwood transceivers, by DXSoft
[ Hits: 2945 | Votes: 2 | Rating: 8.5 ]
- The HamStationUltra package for Windows is designed specifically for the Kenwood TS-2000, Yaesu FT-2000 and Ten-Tec Jupiter/Pegasus transceivers.
[ Hits: 4814 | Votes: 3 | Rating: 7 ]
- This is a very simple program which helps visually handicapped people to see the frequency and mode of the rig. Or maybe it's useful for demos, trade shows or similiar. It will work with any Icom except the IC-735.
[ Hits: 1171 | Votes: 1 | Rating: 10 ]
- IC-746 soft control by IW2BSQ
- IC-746 radio control program in italian and personale info
[ Hits: 2863 | Votes: 10 | Rating: 4.49 ]
- IC7000BKT Icom IC-7000 CAT Control by IZ2BKT
[ Hits: 874 | Votes: 3 | Rating: 5.33 ]
- IC7000BKT Icom IC-7000 CAT Control
- CAT Control specific for Icom IC-7000 allows managing filters and all the commands of the RTX. Includes a function to synchronize and manage all the memories of the IC-7000.
[ Hits: 1968 | Votes: 2 | Rating: 10 ]
- IC706 CAT Control
- Icom IC-706 Cat control program, tested with Icom models 706, 706MKII, 706MKII/G and IC718 transceivers by IZ2BKT, Mauro.
[ Hits: 6956 | Votes: 9 | Rating: 6.11 ]
- IC706_BKT CAT Icom Radio Control
- IC706_BKT CAT is used to control the transceiver Icom IC-706, IC-706MKII IC-706MKII/G and IC-718 from the personal computer. Works on Windows and is available in free and free donation version
[ Hits: 318 | Votes: 0 | Rating: 0 ]
- IC706_BKT Icom 706 CAT Control
- CAT Control for Icom IC706-IC706MKII and IC706MKII/G
[ Hits: 2433 | Votes: 2 | Rating: 5.5 ]
- IC7100BKT IC-7100 CAT Control Software
- IC7100BKT is a free program to control the Icom IC-7100 transceiver for MS Windows, available in free version with limited functions and full donationware version.
[ Hits: 1171 | Votes: 0 | Rating: 0 ]
- IC7300BKT Icom IC-7300 CAT Control
- Windows PC control program for the Icom IC-7300 transceiver. Power-on and Power-off by software BktNetInterface for JTDX and WSJT-X, audio recording, memory management, cw keyer management, Interface for other software
[ Hits: 392 | Votes: 2 | Rating: 7 ]
- ICOM OCX
- CI-V OCX For The Icom 756Pro allow you to interface your own application or visual basic, excel, word or similar custom applications to your icom radio.
[ Hits: 1558 | Votes: 5 | Rating: 10 ]
- ICOM Rig Control
- Freeware amateur radio transceiver control program tested with IC-756 Pro.
[ Hits: 6964 | Votes: 8 | Rating: 5.88 ]
- ICOM RS-BA1
- Icom Remote Control Software for windows remotely control Icom transceivers through an IP Network
[ Hits: 910 | Votes: 2 | Rating: 5.5 ]
- IcomControl for PCR1000
- Icomcontrol a controller program for the icom pcr1000.
[ Hits: 3101 | Votes: 1 | Rating: 10 ]
- Free program that interfaces most ICOM radios with the ILG radio frequencies database and lets you click a station in the database to tune your radio to the station, or scan the list looking for stations that are on the air.
[ Hits: 3204 | Votes: 2 | Rating: 5.5 ]
- JaRec - Java Radio Remote Control Software
- JaRec is a multi-platform Java application which can be used to control your own CAT enabled transceiver (with support for audio) using a Serial/USB Serial/Bluetooth or network connection. jAReC can act as both a server and as a client. The PocketRxTx Android application can be used as a client securely to connect over the network and control (CAT) your radio transceiver remotely via jAReC server over the Internet or local LAN, with bi-directional audio support.
[ Hits: 1385 | Votes: 8 | Rating: 7.61 ]
- K2Net is a remote operation windows software for the Elecraft K2, and allow remote control over internet or wi-fi networks by G4ILO
[ Hits: 384 | Votes: 0 | Rating: 0 ]
- K3 Soft Panel
- A small application for controlling the Elecraft K3
[ Hits: 83 | Votes: 0 | Rating: 0 ]
- KC2IVL - FT100 for Linux
- Yaesu FT-100 radio control software for linux
[ Hits: 1818 | Votes: 28 | Rating: 3.96 ]
- VR-5000 Signal Capture and Analysis Software - Give your VR-5000 a new face. Controls your VR-5000, Log stations, Manage frequency lists, Record Audio and more. This program utilizes a more visual approach to simplify your radio listening.
[ Hits: 1905 | Votes: 4 | Rating: 3.25 ]
- Kenwood TH-D7 - tkD7
- tkD7 is an expectk script for controlling the Kenwood TH-D7 HT on Linux or FreeBSD
[ Hits: 1112 | Votes: 4 | Rating: 7.25 ]
- Kenwood TS-570D RCP-2 software
- Download Kenwood's free radio control software for the TS-570 HF
[ Hits: 14230 | Votes: 133 | Rating: 6.14 ]
- KMIJ Kenwood Remote Control for TS-850/TS-450
- Windows radio control software for the Kenwood TS-850S and TS-450S HF Rigs. Originally released as shareware, there is a version that is now Freeware, with free registration upon request. Old program by VE3MIJ
[ Hits: 12357 | Votes: 66 | Rating: 6.8 ]
- KTune is a small utility that allows you to use a Griffin Powermate USB knob to tune your Elecraft K3 radio.
[ Hits: 455 | Votes: 3 | Rating: 7.33 ]
- Link700 is a program that will allow users of Kenwood TH-D7A, E, and AG and TM-D700A and E to download all the data settings of their radio, edit and modify data, upload the data, and save settings to a disk file
[ Hits: 3837 | Votes: 12 | Rating: 6.43 ]
- HB9MTN loop motor control software.
For motor control, either Centronics, RS232 or USB ports can be used, for CAT-Control the RS232 or USB ports.
[ Hits: 1189 | Votes: 0 | Rating: 0 ]
- Micro-G2b Rotor control
- This program uses a Z-World Micro-g2b board to control up to 4 rotors.
[ Hits: 1266 | Votes: 1 | Rating: 1 ]
- MiniDeluxe is a light-weight replacement for Ham Radio Deluxe that provides interoperability with FlexRadio's PowerSDR and Ham Radio Deluxe's Logbook and digital mode programs
[ Hits: 2617 | Votes: 0 | Rating: 0 ]
- MPFilters for FT-1000MP
- MPfilters is a Windows-based program which enables you to select the Yaesu FT-1000MP and FT-1000MP Mark V main receiver and sub receiver IF filters via the radio’s CAT port
[ Hits: 764 | Votes: 1 | Rating: 10 ]
- N4PY Software
- N4PY Software is your source for high quality, effective rig control software for your transceiver. N4PY offers rig control software for a wide variety of receivers from the Elecraft K3 to the Ten Tec RX 320 receiver and it is major equipment integrator supporting panadapters, winkeyer, Tmate2 or FlexControl
[ Hits: 1175 | Votes: 0 | Rating: 0 ]
- N9ZLE ICOM - CIV Software
- IRC is a Free Radio control program for Icom radios using the CIV CT-17 or compatible interface. This program allows the use of different skins to display just about any radio from the IC746 to a secret agent watch. The program uses the new features available with the 746 and 756 to upload or save memories from your rig
[ Hits: 5222 | Votes: 14 | Rating: 6.94 ]
- A COM component for transceiver/receiver CAT control. Not a complete program, but rather a component tool that allow software developers to connect their program to a supported transceiver.
[ Hits: 2660 | Votes: 3 | Rating: 6 ]
- PCR1000 Scanning Software
- Commercial software developed exclusively for scanning 25 to 1300 MHz. No other PCR1000 software offers as many innovative scanning features.
[ Hits: 2070 | Votes: 1 | Rating: 1 ]
- ProScan 780
- Computer aided scanning software for the BC 780, commercial runs under windows.
[ Hits: 1695 | Votes: 9 | Rating: 9.56 ]
- Translates CAT PTT commands into COM port DTR line changes. Use COM port PTT instead of CAT PTT control.
[ Hits: 782 | Votes: 5 | Rating: 7.2 ]
- R-20 Signal Capture and Analysis
- This windows software includes an easy to read display with features designed to give you accurate and enhanced control of your ICOM IC-R20 Communication Receiver. Commercial 35 USD.
[ Hits: 549 | Votes: 2 | Rating: 1 ]
- R-20 Signal Capture and Analysis Software
- Connect your R-20 Communications Receiver to your computer. Put your listening hobby on your computer desktop.
[ Hits: 828 | Votes: 6 | Rating: 6.5 ]
- ICOM R2 controlling program
[ Hits: 1262 | Votes: 3 | Rating: 7.33 ]
- Radio Control Program ARCP-480
- This free software is an application solely for the use of controlling the Kenwood TS-480.
Can be used to edit, save, and export to the TS-480 information such as Memory, Menu, and Auto Mode frequencies.
[ Hits: 2131 | Votes: 2 | Rating: 9 ]
- Radio Frequency - ICOM R8500
- The RadioFrequency Program is a professional Software dedicated to all HAM, SWL and Radio Listeners. Freeware. Included is a Text-CSV dBase Converter. Connection to the ICOM R8500 Receiver.
Special Scanning Feature. Special Search Feature x large dBase.
[ Hits: 647 | Votes: 1 | Rating: 10 ]
- RadioComm can be used to program your Icom radio's memory, or to create nice radio-frequency spectra or to interface your radio to a huge database of frequencies.
[ Hits: 1200 | Votes: 3 | Rating: 10 ]
- RadioCommander 2052
- Radio control program for windows by kd5lmy
[ Hits: 36432 | Votes: 30 | Rating: 3.18 ]
- Allows any PC to improve the performance of radios and scanners, providing fully automated control of the radio (plus tape recorder if desired) allowing unattended scanning, logging, speech and tape recorder control. Works with AOR, DRAKE, Icom, Kenwood, Lowe, Optoelectronics, Radio Shack and Uniden.
[ Hits: 2186 | Votes: 1 | Rating: 10 ]
- Freeware RemIcom-B is a very simple ICOM remote program.
Display of current frequency, mode and filter
ITU HF Band assignment (ITU Region 1, 2 and 3 selectable)
HAM HF Band usage
analog frequency band display
[ Hits: 3579 | Votes: 1 | Rating: 10 ]
- Remote SDR - SDR Control
- Remote SDR is a web application allowing to remotely control an amateur radio transceiver between 1 MHz and 6 GHZ. It allows processing of Adalm-Pluto SDR in addition to HackRF or RTL-SD Reception in NBFM, WBFM, AM in addition to SSB Transmission in NBFM or SSB and more
[ Hits: 170 | Votes: 2 | Rating: 9 ]
- RemoteHams.com permit to display and control transceivers all around the world
[ Hits: 3528 | Votes: 67 | Rating: 7.78 ]
- RigResident is a small program for RIG control, which does allow to set and read data of connected tranceiver (frequency, mode etc).
RigResident supports more than 70 TRX models from ICOM, KENWOOD, YAESU and Ten-Tec.
[ Hits: 3651 | Votes: 4 | Rating: 7.1 ]