coax balun

The DXZone.com

coax balun

45 links

Antennas : Baluns
  • Coaxial Balun  pop - Coaxial balun plan by I0QM
    [ Hits: 30473 | Votes: 11 | Rating: 5.46 ]
  • Transmitting Baluns - One of the most popular Ham-lore rumors is a balun's performance can be tested or evaluated by grabbing the coax and watching for an SWR change. This is probably one of the worse test-rumors circulating
    [ Hits: 3295 | Votes: 2 | Rating: 9.5 ]
  • QRP Magnetic longwire balun with VHF-splitter - This Magnetic Longwire Balun (MLB) makes it possible to efficiently use a coaxial lead-in cable with all forms of longwires, T-forms or other types of wire antennas, without the need for an antenna tuner.
    [ Hits: 3085 | Votes: 3 | Rating: 7 ]
  • Simple 75 ohm Coax Balun - A simple current balun for the FM broadcast band
    [ Hits: 2323 | Votes: 7 | Rating: 2.86 ]
  • Magnetic longwire baluns 1:9 - This Magnetic Longwire Balun (MLB) makes it possible to efficiently use a coaxial lead-in cable with all forms of longwires, T-forms or other types of wire antennas, without the need for an antenna tuner.
    [ Hits: 3584 | Votes: 4 | Rating: 6.75 ]
  • Magnetic Long Wire UnUn 9:1 - An impedance transformer (9:1) to feed a high impedance long wire (~450 ohm), down to a 50 ohm unbalanced coaxial input.
    [ Hits: 1928 | Votes: 4 | Rating: 7 ]
Antennas : Baluns : 1 to 1 Balun
  • A 1:1 Coaxial Balun  pop - PDF article about a coaxial 1:1 balun, original concept by I4BBE using a quarter-wavelength and the three-quarter-wave adapting sections with the 50-Ohm coaxial cable by I0QM
    [ Hits: 44459 | Votes: 30 | Rating: 7.22 ]
  • A Cost Effective Current-mode 1:1 Balun - A cost effective current-mode 1:1 balun can be constructed from a length of coax and a rod typically used for a broadcast antenna loop-stick, some electrical tape, cable ties, a length of PVC water-pipe and some connectors.
    [ Hits: 9190 | Votes: 4 | Rating: 7.25 ]
  • Simple HF Baluns for 50/75 ohm coax - Show diagrams, winding methods and tables of some 1:1 and 4:1 baluns for 1.8 - 30 MHz suitable for use up to 200W (400W peak) on systems using 50 or 75 ohm coaxial cable input where SWR should not exceed 1.6:1.
    [ Hits: 15201 | Votes: 25 | Rating: 4.32 ]
Antennas : Baluns : 4 to 1 balun
  • The Guanella 1:4 balun - A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods, some electrical tape, cable ties, a length of PVC water-pipe and some connectors. This form of 1:4 current-mode balun is named after G. Guanella.
    [ Hits: 3635 | Votes: 1 | Rating: 10 ]
  • 4:1 coax balun design - Online calculator for a 4 to 1 coax cable balun
    [ Hits: 7027 | Votes: 26 | Rating: 5.49 ]
Antennas : Bazooka
  • The Double Bazooka Antenna - The Double Bazooka Dipole is a very efficient single band antenna which is very quite, and does not require the use of a balun. This antenna consists of coax (RG58) or other 50 ohm type with the shield split at the center and the feedline attached to the open ends
    [ Hits: 8170 | Votes: 4 | Rating: 8.25 ]
Antennas : Feed Lines
  • Transmission Lines - About feed lines, parallel lines and coaxial lines, notes on impedance, SWR, Baluns, velocity factor and more by NZART
    [ Hits: 604 | Votes: 1 | Rating: 8 ]
Antennas : Feed Lines : Choke
  • Choke balun - Essentially, a choke balun is designed to 'divorce' your antenna from the feed line. if your feed line is coaxial cable then you don't want it to be part of your antenna. you want to be able to deliver all your power to the radiator itself, i.e. 'the antenna'. a choke balun does this admirably
    [ Hits: 573 | Votes: 11 | Rating: 7.27 ]
  • A model of the W2DU 1:1 choke balun - Notes on making the W2DU choke balun by placing several ferrite sleeves around a coaxial cable.
    [ Hits: 9709 | Votes: 7 | Rating: 2.29 ]
  • Homebrew RF chocke - Magnetic Longwire Balun - RF Choke to prevent hf currents on the feedline. This Magnetic Longwire Balun (MLB) makes it possible to efficiently use a coaxial lead-in cable with all forms of longwires, T-forms or other types of wire antennas, without the need for an antenna tuner.
    [ Hits: 3409 | Votes: 3 | Rating: 10 ]
Antennas : Windom
  • Windom Antenna with 4:1 balun - The Windom is an Off-center wire multiband Antenna. The old version was fed just by a single-wire connected on 1/3 of antenna's overall length or with an open-line feeder (later versions). Here is another model with coaxial feeder, which is compatible with Solid States - 50 Ohm output transceivers .
    [ Hits: 8024 | Votes: 9 | Rating: 6.89 ]
Manufacturers : Antenna Parts
  • The WireMan - Your source for coax, connectors, wire, baluns, and other certified quality wireman products.
    [ Hits: 11374 | Votes: 13 | Rating: 6.38 ]
Manufacturers : Antenna Switches
  • MFJ Enterprises  pop - MFJ manufacturer of ham radio antenna products, antenna tuners, antenna analyzers, morse code & CW, SWR wattmeters, antenna accessories , power supplies, audio filters, TVI filters, baluns, coax switches and more
    [ Hits: 44187 | Votes: 33 | Rating: 6.84 ]
Manufacturers : Baluns
  • CoaxMan - The Coaxman by Clear Signal Products, Inc. features a complete Wireman line of coaxial cable and antenna wire. Antenna wire, baluns, coax connectors, insulators, ladder line, magnet wire, rope.
    [ Hits: 1860 | Votes: 2 | Rating: 4.5 ]

Not satisfied ? Lookup Google Custom Search Engine for coax balun


Search coax balun with: Yahoo!, DuckDuckGo , Bing

Search

Related Searches

Get our links, Everywhere!

Follow us on Social Networks
RSS Feeds The DXZone.com RSS feed

Sign up for daily Newsletter

Service provided by Google FeedBurner

Free for your Site

Add our gadgets to your site
Daily Top 10 links

Google Custom Search