Search results

HamScope is a freeware windows multi-mode communications package for amateur radio that supports: PSK31 BPSK and QPSK RTTY ASCII MFSK16 PACKET CW. Support radio control interface for several ICOM, TenTec, Kenwood, and Yaesu transceivers. Compatible with DXbase LOGic 7 RYLogit TRX-Manager YPLOG. By KD5HIO Glen

Popular ham radio packet windows application. By G4IDE (RIP)

RadioRaft decodes 10 different ARQ modes, 8 different FEC modes, Packet, Baudot, CW... It works with a Hamcomm interface or a radiomodem. RadioRaft offers automatic detection of modes, speeds and shift. It comes with a frequencymeter/baudmeter included, it has signal frequency tracking and a bit by bit display mode. Very easy to use. practical and fast.

APRS for Linux is a multifaceted system for use with packet radio by Hams, it allows the monitoring of real time geographical information such as the position of vehicles, the status of weather, radio direction finding and much much more. It envolves mapping, GPS tracking, packet radio, etc

SV2AGW packet radio driver, runs TCP/IP protocol over radio, support windows and several devices like baycom and, E5DXL 9600 G3RUH compatible modems, DRSI and Sound cards by SV2AGW George Rossopoulos.

A complete overview of modern digital HF radio operating modes: PACTOR AMTOR GTOR CLOVER RTTY PSK31 HELLSCHREIBER PACKET MT63 MFSK16 THROB.

Kantronics produce Modems, Tnc, Kam, Marine, wireless modems. Packet radio communication devices, HF E-mail, paging, GPS tracking, weather data gathering, or wireless data transmission.

SIMPLEX is a free windows program which transforms any transceiver into an audio repeater. It works on HF, VHF, UHF etc with SSB, CW, FM, packet, SSTV and every modulation mode.

You'll find more than 330 Amateur Packet Radio Gateways on world maps.

Commercial amateur radio logging software for windows. Full featured logging, HF radio control, Internet Packet, VHF Packet, Label Designer, Report Designer, and a lot more.

FBB is a freeware bulletin board software for amateur packet-radio run on DOS Windows and Linux

RXCLUS is a free windows amateur radio software especially designed for the DX'ers and SWL's wanting to receive the informations transmitted by packet radio on the DX-cluster system. It supports also telnet protocol.

GP for ms dos and ms Win by DD3DJ

Packet/telemetry modems, GPS tracking, sound card interfaces

An adjustable VSWR, 2 meter J-Pole

A free application that captures DX and WWV spots from up to 5 internet clusters and a local packet cluster. DX Spots are merged and stored in a Spot Database on your PC, enabling you to monitor, sort, and filter them in real time; known LotW participants are highlighted, as are needed stations. WWV spots are plotted to show SFI, A, and K over the last solar revolution.

Macintosh automatic position reporting system, developed by Bob Bruninga, WB4APR, to track boats and vehicles using GPS and packet radio. MacAPRS was written by Keith Sproul, WU2Z and Mark Sproul, KB2ICI

Why Packet Radio? Could be, You are Missing Something Funm, by Greg Jones, WD5IVD

RTTY SSTV PSK31 MFSK MT63 PACKET APRS and more...

Links to useful packet and digital radio resources

Manufacturer of popular TinyTrak APRS Tracker offer Packet radio tools, wxtrack interfaces, TinyTrack3, a GPS position encoder, PicCon controller for transmitter hunting, GST-1 and GST-2 GPS format converters, and PeekPack, a packet radio monitoring tool.

Packet Modems, tnc, portable tnc manufacturer

Yaesu FT-1000MP, FT-990 and FT-920 packet data port to pc sound card for psk 31 interface.

A Primer for the new Packet Radio operator

Freeware program, special and easy to use packet program for communicating with ISS, PCSat and other 'compatible' sats. Can also be used for basic normal packet.

The Ohio/Penn DX Bulletin is freely distributed on the Internet and packet clusters around the world, by Tedd Mirgliotta, KB8NW. Published almost on weehly basis the OPDX is one of the oldest DX news list on the internet.

Sells leading-edge voice and digital communications products to the world-wide military, government, industrial, and amateur radio marketplaces. Bluetooth Remote Audio/PTT, Rig Controller with Audio & PTT , HamLinkUSB Rig Control, Noise filtersm antenna analyzers, Multimode Data Controller, TNC, Packet Radio Terminal Node Controller. USB2RS232

Eighteen-part tutorial on packet radio in HTML and ASCII format from Larry Kenney, WB9LOZ

Log and Contest Program, Windows based, network capability, CW via COM/LPT, SSB/RTTY via soundcard, trcvr-Steuerung (2TX for SO2R etc.), DX-cluster via packet, internet or telnet, statistics(DXCC, IOTA, locators...), log import/export, QSL card handling(printing tool), grey land map etc. etc. and freeware!

The Packet Terminal Driver program is a general purpose communications package for communicating with a packet TNC attached to your IBM-PC/clone. The program was written to work with the Kantronics range of TNC's but should work with any TNC that is connected to a serial port on your computer.

An open source Automatic Packet Reporting System tracker based on Arduino by Javier Martin

The purpose of the APRS-Beacon is to provide simple APRS-compatible position beacons for up to three Objects. It is designed to 'stand alone' and does not monitor other traffic on the frequency. It can use a single-port TNC (in 'native' mode), a single- or dual-port TNC in Kiss mode or the AGW Packet Engine in order to transmit on up to four radio ports.(When running with AGWPE, APRS-Beacon will also work with Windows 2000)

APRSISCE/32 is an Automatic Packet Reporting System (APRS) program, primarily intended for Windows and Windows Mobile (CE), although it will run on Linux and Mac OS under wine. Offer enhanced messaging, announcement support via ANSRVR, and QRU for object query support, can run as a highly configurable Digipeater

Yo5ofh j-pole antenna plans for 2 and 6 meters

This program needs no other explanations because it is just a terminal program. The only difference is that it is multitasking. This means that you can have multiple connects and you can YAPP without restrictions. You can receive as many YAPPs as you wish simultaneously. If you have more than a RadioPort (You have more than a TNC) you can connect in any RadioPort. You can have also unlimited number of connections (about 100).

DXSpider is a clone of PacketCluster software that runs under several operating systems including Linux and Windows compatible with the AK1A program

This web site represents the home of "Country Files", databases of entities (countries), prefixes and callsigns that are used by amateur radio logging software. There are three "flavors" of country files: CTY.DAT used by contest logging software such as CT, N1MM, NA, TR and Writelog DX4WIN.CTY used by the DX4WIN logging software WPXLOC.DAT used by packet cluster software such as AR-Cluster, CC Cluster and DX Spider maintained by Jim Reisert, AD1C

Flexnet and AGW packet engine tested and reviewed by IZ7ATH

Freeware logging software by Roberto IN3VRR featureing LogBook, CallBook & PacketCluster capabilities

Ham radio logging software by IV3DDM, includes award facilities, callbook, packet cluster, RTX control, QSL info, ADIF - in english.

RDXCluster is a free windows telnet client for worldwide DX packet Cluster,featuring multiple spot windows, Band/Mode DXCC window, DX History window, Top DX window, Find, highlights, filters the spot by Roberto Verrini

Packet radio terminal program for win 3.1 and above, WinBox is a modified version of WinGT for cb radio usuage

How to use packet radio using the WindowsCE operating system

Amateur Packet Radio Gateways by dl1eis

Setting up and testing a sound card packet radio interface by KD5ZUG

German page about packet radio, english version available

G4PDQ's PacketCluster routines to make PacketCluster a little more interesting for the user and a little easier for the SysOp

Reference Manual developed by the Ventura County ARES AREA 6 Training Group

Building the Balanced Termination Folded Dipole

Linpac is an extensible Linux packet terminal that supports easy access to concurrent connections (streams), PBBS/FBB forwarding, and support for adding external commands