Raspberry Pi and Ham Radio
Ham Radio Raspberry Pi projects
Sort:
-
This tutorial will show you how to connect a Morse key to the Raspberry Pi GPIO pins, and how to write code to play tones when you hold the key down. You will also decode the Morse that you're keying so that it comes up on the screen. -
This simple hack turns your Raspberry Pi into a powerful FM transmitter -
Keep track of much more than the time with this Wi-Fi enabled device. HamClock is a desk clock that could show accurate time, geography, time zone, solar activ- ity, sunrise and sunset times, Maiden- head locators, beam heading, -
Using the Raspberry Pi to operate Weak Signal Propagation Reporter -
The Raspberry Pi Repeater Controller Project goal is to develop a low cost, low power, but feature rich duplex repeater controller suitable for setting up a temporary or emergency repeater systems with radios that can be run on portable power -
Radioberry Radio hat for raspberry pi. HF (0-30 MHz) The latest development of PA3GSB is a radio card plugged into a raspberry pi (2 or 3) , a so called rpi-hat, forming an amateur radio. -
Collection of Amateur radio packages for the Raspberry Pi devices -
This electronic board will be installed over a Raspberry Pi CPU card to provide a repeater controler. All features are software controlled with the famous SVXLINK and other interessed modules. -
Settng up a 40 meter WSPR beacon based on Raspberry Pi by VA3PAW -
Barest of bones APRS RF position reporter using a Raspberry Pi B+, USB GPS receiver, Baofeng UV-5R, and a mono 3.5mm audio cable between the Pi and the radio -
Build and run your own ADS-B receiver for 100 USD with a Raspberry Pi -
You can now build and run your own ADS-B ground station that can be installed anywhere and receive real-time data directly from airplanes on your computer -
This article provides a step-by-step guide for assembling a Raspberry Pi-based Satellite Tracker Interface, designed to work with Green Heron Engineering's RT-21 controllers and MacDoppler software. The guide covers hardware assembly, SD card image installation, and system configuration for satellite tracking. -
Raspberry Pi Telemetry Station project by Burns Fisher, WB1FJ , Chris Thompson G0KLA/AC2CZ. A step by step guide on Building a Fox-In-A-Box The Easy Way, A Prebuilt SD Card Image or from scratch. -
Raspberry Pi to Clublog bridge that consumes broadcasted QSOs from N1MM, transforms the QSOs into ClubLog ADIF format and sends those QSOs in batch or real-time to ClubLog automatically -
Running D-Rats on a Raspberry Pi documentation and instruction by n0so -
Getting your Raspberry PI up and running your D-Star radio kit. This will work with DVAP / DVRPTR or DVmega -
A guide to choosing the right hardware and a guide on how to install DXSpider on a Raspberry Pi3. This article include a video and a PDF guide about the installation. -
How to limit unwanted harmonics from your raspberry Pi radio transmitter by introducing filters. -
Taking the Raspberry Pi 2 for a Test Drive with GNU Radio. Installing GNU Radio and receiving aircraft radar with a USB TV tuner -
A tutorial on how to setup a receiver capable to decode SSTV signals with a small RaspberryPi version 2 and a RTL-SDR dongle. The author explains how to install the needed software to interface the RTL-SDR and a step by step guide to install the QSSTV software used to decode the signals. -
Initial set up of Broadband Hamnet on a Raspberry Pi. -
Reference site of the HAMVOIP AllstarLink AllstarLink provides hams with a means of connecting radios, repeaters or simplex links, over the internet. It is built upon the asterisk open source PBX and runs on Linux -
This detailed guide provides step-by-step instructions on setting up a HamClock for your shack using a Raspberry Pi and the HamClock 4.21 software. It includes recommendations for hardware such as Raspberry Pi models, SD cards, PSUs, and displays. The guide covers installation, setup, configuration, and suggestions for customizing the default settings. Whether you are a beginner or experienced ham radio operator, this guide will help you create a functional HamClock for your shack with ease. -
he LoRa-APRS-iGate was developed in cooperation with the Austrian HAM Radio Association. With this software and the LoRa GW Shield, devices transmitting on LoRa, frequency 433 MHz can be integrated into the APRS network. The transmitter can then be displayed on the website https://aprs.fi. -
A tutorial on setting up a Low Cost QRP (FT8, JT9, WSPR etc) Monitoring Station with an RTL-SDR V3 and Raspberry Pi 3 -
This project is a portable device used to automatically point a directional antenna towards an orbiting satellite. It takes all the effort out of little kids holding the antenna and figuring out where to point it. It allows students to talk through Amateur Radio satellites or download weather satellite images. Note: This is a complex DIY project for the advanced kit constructor. -
Remotely-Operated 1200 Baud AX.25 Narrowband Packet Radio and APRS on a Baofeng UV-5RA and Raspberry Pi 2 -
Raspberry pi powered fox hunt transmitter. pifox is a script written by KM4EFP to configure, control, and deploy a Raspberry Pi as a fox hunt transmitter. No external radio needed use your Pi's gpio output as a radio transmitter. -
QrssPiG is short for QRSS (Raspberry)Pi Grabber able to process I/Q stream from an rtl-sdr, HackRF or other sdr devices -
This page describes how to set up RaspBerry Pi Linux system with already configured AX.25 softwares on SD or micro SD cards -
Remote ham radio operation through a Raspberry Pi -
How to receive automatically NOAA wather satellite images with a Raspberry Pi and a RTL SDR. This project requires a Raspberry Pi 3 Model B a common NooElec SDR Dongle and a QFH Antenna in the attic. Article explains how to setup and configure software but no instructions on antenna. -
Connecting and configurig an USB Sound Card key to the raspberry Pi to allow digital mode decoding and remote rig applications -
Downloading and installing all needed packages to make a Raspberry Pi as an APRS Tracker. Configuring direwolf and setting NTP on the Raspberry Pi -
Setting up a Raspberry Pi as Remote Server for RTL2832u SDR -
A project to turn a Raspberry Pi into a very versatile tracker, digipeater and an iGate -
This project is an APRS iGate for digipeater aboard the ISS. As the ISS pass over the iGate location, the TNC decoded the audio tones and creates data packets the Raspberry Pi can receive. -
In this tutorial, the author shows the basics of how to set up a Raspberry Pi Pirate Radio utilizing the FM Transmitter software and a piece of wire. -
Introduction to Raspberry Pi and possible usages in amateur radio, PDF presentation. -
Remote Ham Radio via WebRTC Audio Raspberry Pi 3. Stream Transceiver Audio to and from the remote station though a Browser using WebRTC. -
Get started with SDR using a Raspberry Pi and inexpensive RTL-SDR tuner. -
A complete DIY Raspberry Pi Weather Station including software, capable to read wind speed, wind direction, rain gauge and with a temperature and humidity sensor along to a camera. -
Raspberry Pi WebSDR Receiver Project running SoftRock Lite ii Receiver (40m) and Raspberry Pi Model B -
How to build a simple WSPR beacon using the Raspberry Pi for the transmitter -
Tutorial- WSPR receiver with Raspberry Pi and RTL-SDR -
How to compile and configure WSPR on a Raspberry Pi -
Software running on the Raspberry PI, Control up to 8 arduino rotators modules, Azimuth maps, Cluster support, Band decoder, contest Web Log, Webcam with RaspiCam support -
A simple and cheap solution to monitor temperature of your repeater implementing a Raspberry Pi device with a set of popular tools made in python a database and RRD tool -
rpitx is a general radio frequency transmitter for Raspberry Pi which doesn't require any other hardware unless filter to avoid intererence. It can handle frequencies from 5 KHz up to 1500 MHz. -
Setting up a Raspberry Pi as a SDR Server with RTL-2832U USB dongle -
Sending and receiving text with Morse code light pulses across the room is a fun and cheap project you can do on a Raspberry Pi or Arduino or any other microcontroller. This post explains how I did it, and how you can do it too. -
An interesting guide to installing software on a Raspberry for amateur radio use. This documentation cover the Raspberry Pi 4 version that whose hadware is powerfull enought to fullfill all requiriements for ham radio programs. -
Portable SSTV camera that takes a picture and transmit it with ham radio SSTV -
SmallDV is an embedded FreeDV for Raspberry Pi from Matt KK5JY -
Use your Smartphone as an Oscilloscope to visialize signals from 150 Hz to 15kHz and as a Signal Generator to generate sinusoidal, square and triangular signals up to 15kHz -
Using the raspberry Pi for amateur radio operations with digital mode decoding and log book program -
TNC-Pi is a special version of TNC-X designed to interface directly with the Raspberry Pi computer. It can connect to the Pi either via the Pi serial port, or via the I2C protocol. -
Send and receive wireless messages adding a small 433MHz radio to your Raspberry Pi, without the need of a WiFi connection and operate remote-control main sockets -
The instructions listed here show you how to set up a Raspberry Pi for use as an RTL-SDR dongle server -
Creating a 2m Fm Repeater with a Raspberry Pi (B) and a RTL dongle. -
How to install WSJT-X ona a raspberry Pi and start operating with FT8 -
The goal of this interesting project is to monitor a particular set of frequencies for a set period of time. In this article your will find instructions to build and operate an all-band WSPR node using cheap hardware and free software. At the end of this you'll have a Raspberry Pi, connected to an RTL-SDR dongle that monitors all of the WSPR frequencies rotating randomly every 15 minutes.